..::CM2MT2 SECURE BOOT SUCCESS REPORT STARTs::.. - Page 7 - GSM-Forum

Mobilekiller79 · 11-17-2018, 13:28

Quote:

Originally Posted by gracy_elec

SUCCESSFULLY REMOVE PATTERN LOCK (VIVO-1714 Y69 PD1705F_EX MT6755)USB

THANKS INFINITY-BOX TEAM

Is it fake post

See my picture which is completely against yours.

Here is log

Operation : Identify [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM35)
MODE : PRELOADER PORT
PORT : 35
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : Vivo : V5 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00002001 : DA SEND ERROR!
ERROR : SECURE BOOT : MISMATCH BOOT SIGNATURE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

A.G.Shahid · 11-17-2018, 13:30

Quote:

Originally Posted by **************

Is it fake post

See my picture which is completely against yours.

Here is log

Operation : Identify [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM35)
MODE : PRELOADER PORT
PORT : 35
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : Vivo : V5 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00002001 : DA SEND ERROR!
ERROR : SECURE BOOT : MISMATCH BOOT SIGNATURE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Install Infinity CM2MT2 BOOT Files v1.1
http://forum.gsmhosting.com/vbb/f296...-00-a-2391974/

Please Use MTK Latest Ver 2.02 ...
http://forum.gsmhosting.com/vbb/f296...ments-2509099/

A.G.Shahid · 11-17-2018, 13:46

Quote:

Originally Posted by **************

Is it fake post

See my picture which is completely against yours.

Here is log

Operation : Identify [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM35)
MODE : PRELOADER PORT
PORT : 35
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : Vivo : V5 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00002001 : DA SEND ERROR!
ERROR : SECURE BOOT : MISMATCH BOOT SIGNATURE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Mobilekiller79 · 11-18-2018, 03:18

Dear shahid

Model added after update with file given in link.
But after update again getting same error in identifying orfactory/frp reset

BROM : 0x00002001 : DA SEND ERROR!
ERROR : SECURE BOOT : MISMATCH BOOT SIGNATURE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO

Can you help me how to resolve it

Thanks

gracy_elec · 11-20-2018, 10:04

SUCCESSFULLY READ NVRAM BAG & BRUSH PATTERN LOCK(LETV X507 LE1S-IN AND:6.0 MT6795)USB

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

gracy_elec · 11-20-2018, 10:13

SUCCESSFULLY BRUSH PATTERN LOCK & FRP(VIVO Y83 1802 AND:8.0.1 MT6765)USB

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

gracy_elec · 11-29-2018, 10:01

SUCCESSFULLY READ NVRAM BAG & BRUSH PATTERN LOCK & FRP(YUNICORN YU5530 AND:6.0 MT6755)USB

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

gracy_elec · 12-01-2018, 16:11

SUCCESSFULLY READ NVRAM BAG & BRUSH FRP(LENOVO K8 NOTE XT1902-3 AND:8.0.0 MT6797)USB

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

gracy_elec · 12-03-2018, 09:52

SUCCESSFULLY READ NVRAM BAG & BRUSH STUCK ON LOGO(VIVO V5S 1713 AND:7.0 MT6750)USB

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

gracy_elec · 12-04-2018, 13:22

SUCCESSFULLY READ NVRAM BAG NEED FOR SECURITY REPAIR(LEAGOO T5 AND:7.0 MT6750)USB

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

localizator · 12-05-2018, 15:31

SUCCESSFULLY READ NVRAM BAG NEED FOR SECURITY REPAIR(DOOGEE X20 AND:7.0 MT6580)USB

SUCCESS REPORT - [Click to open]

Code:

Operation : Identify [ v2.02 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM41)
MODE : BOOTROM
PORT : 41
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BOOTROM
MODE : 0_base : BASE_v1812 | Manual : Disabled
Fail to disable Dog!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
eMMC : OK
eMMC : 460001154D32314550DC07428F5459F2
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 150100464531324D4207DC50F259548F
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
INIT : 0xBC : LP/DDR3 [ 0x00000000 :  [ 0 B ] ]
DRAM : DRAM: 0x40000000 [ 1,00 GB ]
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 150100464531324D4207DC50F259548F
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE12MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x3A3E00000 [ 14,56 GB ]

        SRAM: 0x00020000 [ 128,00 KB ]
        DRAM: 0x40000000 [ 1,00 GB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 535A7A0E2613A8CF7A5A2FC69B306C89

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM53)
MODE : PRELOADER PORT
PORT : 53

Boot done!

Patch Level    : NRD90M
Display ID     : DOOGEE-X20-Android7.0-20180204
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2018-01-05
Build Time     : 1517802778
Product Model  : X20
Product Brand  : DOOGEE
Product Name   : X20
Product Device : X20
Product Board  : X20
Product Manfct : DOOGEE
Board Platform : mt6580
Product Info   : X20

USERDATA : PLAIN ( NOT encrypted )


Done!
Elapsed: 00:00:19

Code:

Operation : Read Security [ v2.02 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM41)
MODE : BOOTROM
PORT : 41
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BOOTROM
MODE : 0_base : BASE_v1812 | Manual : Disabled
Fail to disable Dog!
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
eMMC : OK
eMMC : 460001154D32314550DC07428F5459F2
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 150100464531324D4207DC50F259548F
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
INIT : 0xBC : LP/DDR3 [ 0x00000000 :  [ 0 B ] ]
DRAM : DRAM: 0x40000000 [ 1,00 GB ]
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 150100464531324D4207DC50F259548F
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE12MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x3A3E00000 [ 14,56 GB ]

        SRAM: 0x00020000 [ 128,00 KB ]
        DRAM: 0x40000000 [ 1,00 GB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 535A7A0E2613A8CF7A5A2FC69B306C89

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM53)
MODE : PRELOADER PORT
PORT : 53

Boot done!

SEC Data : 
IMEI[0] : 359861082767072
IMEI[1] : 359861082767080

NVRAM check : Passed!

NVM saved as : NV_MT6580_eMMC_Doogee_X20_CM2MT2.mt_sec
NVM saved to : C:\InfinityBox\CM2MT2\Backup\

Done!
Elapsed: 00:01:04

THANKS INFINITY-BOX TEAM

gracy_elec · 12-06-2018, 08:24

SUCCESSFULLY BRUSH STUCK ON DECRYPTION UNSUCCESSFUL(TECNO-IN2 AND:8.1.0 MT6739)USB

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

gracy_elec · 12-10-2018, 16:51

SUCCESSFULLY BRUSH PATTERN LOCK,FRP & READ FIRMWARE BAG (OPPO A83JS (2018) CPH-1729 AND:7.1.1 MT6763D NEW SECURITY[TP])USB

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

Mobilekiller79 · 12-11-2018, 15:26

Quote:

Originally Posted by gracy_elec

SUCCESSFULLY BRUSH PATTERN & FRP(OPPO F5 CPH-1723 AND:7.1.1 MT6763A)USB

SUCCESS REPORT - [Click to open]

THANKS INFINITY-BOX TEAM

Please guide me the steps to unlock Oppo F5 Youth Password in CM2MT2

Thanks

Mobilekiller79 · 12-11-2018, 15:34

Dear team please guide me how to remove Oppo F5 Youth Password

Card found : XXXXXXXX , v0137
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.02

Load IDBase v11861 Ok!

UserName and/or Password not set! Can't continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.02 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : Oppo : F5 | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00002001 : DA SEND ERROR!
ERROR : SECURE BOOT : MISMATCH BOOT SIGNATURE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

11-20-2018, 10:04	#95 (permalink)
gracy_elec No Life Poster Join Date: Feb 2005 Location: GSM WORLD Posts: 2,079 Member: 118520 Status: Offline Thanks Meter: 3,551	LETV X507 LE1S-IN AND:6.0 MT6795 READ NVRAM BAG & BRUSH PATTERN LOCK Done SUCCESSFULLY READ NVRAM BAG & BRUSH PATTERN LOCK(LETV X507 LE1S-IN AND:6.0 MT6795)USB SUCCESS REPORT - [Click to open] Operation : Identify [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM87) MODE : BOOTROM PORT : 87 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6795 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : LEGACY MTK BROM : SecLevel : 0x00000005 BROM : SecMode : SBC+SDA BROM : BOOTROM MODE : 0_base : BASE_v1836 \| Manual : Enabled BROM : SLA BROM : SLA Passed! Fail to disable Dog! AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6795 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! NAND : DEVICE NOT FOUND eMMC : OK eMMC : 300001113747323330950034D9C2A9B9 DAInf: 3 : 2 : 146 DA : EXT_RAM NOT initialized! eMMC : OK eMMC : 110100303332473734009530B9A9C2D9 NAND : DEVICE NOT FOUND NAND : 000000000000000000000000 EMI : DEV : MT6795 EMI : SRC : preloader_x500.bin EMI : CNT : 0008 EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 0 B ] EMI : [01] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 2.00 GB ] EMI : [02] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 2.00 GB ] EMI : [03] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 2.00 GB ] EMI : [04] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : [05] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : [06] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : [07] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : Init EMI from PRELOADER INIT : 0xB0 : PRELOADER_INFO [ 0x00000000 : [ 0 B ] ] DRAM : DRAM: 0x40000000 [ 1.00 GB ] DA : DRAM ready! DA : BOOT to 2nd DA ... DA : Receiving HW info EMMC: 110100303332473734009530B9A9C2D9 EMMC: VEN : TOSHIBA \| OEM : 01 \| DEV : 032G74 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x747C00000 [ 29.12 GB ] SRAM: 0x00020000 [ 128.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] CHIP : MT6795 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 56CBB9AF558749CDAC04AC882004B4E6 STATUS : DA : NOR OTP GETSIZE FAIL BSTYLE : EMMC FLASH BOOT DA : USB : FULL-SPEED DA : USB : Change Port Speed PTFN : MediaTek DA USB VCOM (Android) (COM89) MODE : PRELOADER PORT PORT : 89 Boot done! Patch Level : DHXOSOP5801911241S Display ID : DHXOSOP5801911241S release-keys Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-10-05 Build Time : 1479990475 Product Model : Le X507 Product Brand : Letv Product Name : Le1s_IN Product Device : X3_HK Product Manfct : Letv Board Platform : mt6795 Product Info : x500 USERDATA : PLAIN ( NOT encrypted ) IMEI[0] : 8666XXXXXXX3164 IMEI[1] : 8666XXXXXXX3172 NVRAM check : Passed! Done! Elapsed: 00:00:21 Operation : Read Security [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM87) MODE : BOOTROM PORT : 87 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6795 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : LEGACY MTK BROM : SecLevel : 0x00000005 BROM : SecMode : SBC+SDA BROM : BOOTROM MODE : 0_base : BASE_v1836 \| Manual : Enabled BROM : SLA BROM : SLA Passed! Fail to disable Dog! AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6795 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! NAND : DEVICE NOT FOUND eMMC : OK eMMC : 300001113747323330950034D9C2A9B9 DAInf: 3 : 2 : 146 DA : EXT_RAM NOT initialized! eMMC : OK eMMC : 110100303332473734009530B9A9C2D9 NAND : DEVICE NOT FOUND NAND : 000000000000000000000000 EMI : DEV : MT6795 EMI : SRC : preloader_x500.bin EMI : CNT : 0008 EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 0 B ] EMI : [01] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 2.00 GB ] EMI : [02] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 2.00 GB ] EMI : [03] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 2.00 GB ] EMI : [04] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : [05] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : [06] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : [07] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : Init EMI from PRELOADER INIT : 0xB0 : PRELOADER_INFO [ 0x00000000 : [ 0 B ] ] DRAM : DRAM: 0x40000000 [ 1.00 GB ] DA : DRAM ready! DA : BOOT to 2nd DA ... DA : Receiving HW info EMMC: 110100303332473734009530B9A9C2D9 EMMC: VEN : TOSHIBA \| OEM : 01 \| DEV : 032G74 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x747C00000 [ 29.12 GB ] SRAM: 0x00020000 [ 128.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] CHIP : MT6795 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 56CBB9AF558749CDAC04AC882004B4E6 STATUS : DA : NOR OTP GETSIZE FAIL BSTYLE : EMMC FLASH BOOT DA : USB : FULL-SPEED DA : USB : Change Port Speed PTFN : MediaTek DA USB VCOM (Android) (COM89) MODE : PRELOADER PORT PORT : 89 Boot done! SEC Data : IMEI[0] : 86667XXXXXX3164 IMEI[1] : 86667XXXXXX3172 NVRAM check : Passed! NVM saved as : MT6795__eMMC__86667XXXXXX33164.mt_sec NVM saved to : C:\InfinityBox\CM2MT2\Backup\ Done! Elapsed: 00:00:25 Reconnect Power/Cable! Operation : Reset Settings/Format FS [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM87) MODE : BOOTROM PORT : 87 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6795 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : LEGACY MTK BROM : SecLevel : 0x00000005 BROM : SecMode : SBC+SDA BROM : BOOTROM MODE : 0_base : BASE_v1836 \| Manual : Enabled BROM : SLA BROM : SLA Passed! Fail to disable Dog! AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6795 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! NAND : DEVICE NOT FOUND eMMC : OK eMMC : 300001113747323330950034D9C2A9B9 DAInf: 3 : 2 : 146 DA : EXT_RAM NOT initialized! eMMC : OK eMMC : 110100303332473734009530B9A9C2D9 NAND : DEVICE NOT FOUND NAND : 000000000000000000000000 EMI : DEV : MT6795 EMI : SRC : preloader_x500.bin EMI : CNT : 0008 EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 0 B ] EMI : [01] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 2.00 GB ] EMI : [02] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 2.00 GB ] EMI : [03] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 2.00 GB ] EMI : [04] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : [05] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : [06] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : [07] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : Init EMI from PRELOADER INIT : 0xB0 : PRELOADER_INFO [ 0x00000000 : [ 0 B ] ] DRAM : DRAM: 0x40000000 [ 1.00 GB ] DA : DRAM ready! DA : BOOT to 2nd DA ... DA : Receiving HW info EMMC: 110100303332473734009530B9A9C2D9 EMMC: VEN : TOSHIBA \| OEM : 01 \| DEV : 032G74 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x747C00000 [ 29.12 GB ] SRAM: 0x00020000 [ 128.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] CHIP : MT6795 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 56CBB9AF558749CDAC04AC882004B4E6 STATUS : DA : NOR OTP GETSIZE FAIL BSTYLE : EMMC FLASH BOOT DA : USB : FULL-SPEED DA : USB : Change Port Speed PTFN : MediaTek DA USB VCOM (Android) (COM89) MODE : PRELOADER PORT PORT : 89 Boot done! Format Ok : USERDATA Format Ok : CACHE Done! Elapsed: 00:00:42 Reconnect Power/Cable! THANKS INFINITY-BOX TEAM

11-20-2018, 10:13	#96 (permalink)
gracy_elec No Life Poster Join Date: Feb 2005 Location: GSM WORLD Posts: 2,079 Member: 118520 Status: Offline Thanks Meter: 3,551	VIVO Y83 1802 AND:8.0.1 MT6765 BRUSH PATTERN & FRP Done SUCCESSFULLY BRUSH PATTERN LOCK & FRP(VIVO Y83 1802 AND:8.0.1 MT6765)USB SUCCESS REPORT - [Click to open] Operation : Identify [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM31) MODE : BOOTROM PORT : 31 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+SEL BROM : BOOTROM MODE : Vivo : Y83 \| Manual : Enabled BROM : SLA BROM : SLA Passed! AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA_VIP.bin AGENT : Found MT6765 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : MT6765 EMI : SRC : preloader_k62v1_64_bsp.bin EMI : CNT : 0006 EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG \| DEV : RD64MB : RAM : [ 4.00 GB ] EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG \| DEV : RH64AB : RAM : [ 4.00 GB ] EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG \| DEV : GD6BMB : RAM : [ 3.00 GB ] EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX \| DEV : HBG4a2 : RAM : [ 4.00 GB ] EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG \| DEV : DH6DMB : RAM : [ 4.00 GB ] EMI : [05] : eMCP : eMMC+LP/DDR4 , ID : 150100445636444D42 : VEN : SAMSUNG \| DEV : DV6DMB : RAM : [ 4.00 GB ] EMI : Init EMI from PRELOADER EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x30000000 [ 768.00 MB ] EMMC: 90014A484247346132A54BC26C2B25C1 EMMC: VEN : HYNIX \| OEM : 4A01 \| DEV : HBG4a2 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x747C00000 [ 29.12 GB ] CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : C5C1DE1C7DCFDFE38021893B8D8F108 DA : USB : HIGH-SPEED Boot done! Patch Level : O11019 Display ID : O11019 release-keys Ver. CodeName : REL Ver. Release : 8.1.0 Sec. Patch : 2018-08-05 Build Time : 1535540693 Product Model : vivo 1802 Product Brand : vivo Product Name : PD1803BF_EX Product Device : PD1803BF_EX Product Manfct : vivo Product Info : k62v1_64_bsp Product Model : PD1803BF_EX Board Platform : mt6765 USERDATA : ENCRYPTED NVRAM check : Passed! Done! Elapsed: 00:00:29 Operation : Reset Settings/Format FS [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000005 BROM : SecMode : SBC+SDA BROM : PRELOADER PORT MODE : Vivo : Y83 \| Manual : Enabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA_VIP.bin AGENT : Found MT6765 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x30000000 [ 768.00 MB ] EMMC: 90014A484247346132A54BC26C2B25C1 EMMC: VEN : HYNIX \| OEM : 4A01 \| DEV : HBG4a2 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x747C00000 [ 29.12 GB ] CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : C5C1DE1C7DCFDFE38021893B8D8F108 DA : USB : HIGH-SPEED Boot done! Format Ok : USERDATA Format Ok : CACHE Format Ok : RESET PROTECTION Done! Elapsed: 00:00:35 Reconnect Power/Cable! THANKS INFINITY-BOX TEAM

11-29-2018, 10:01	#97 (permalink)
gracy_elec No Life Poster Join Date: Feb 2005 Location: GSM WORLD Posts: 2,079 Member: 118520 Status: Offline Thanks Meter: 3,551	YUNICORN YU5530 AND:6.0 MT6755 READ NVRAM BAG & BRUSH PATTERN LOCK & FRP Done SUCCESSFULLY READ NVRAM BAG & BRUSH PATTERN LOCK & FRP(YUNICORN YU5530 AND:6.0 MT6755)USB SUCCESS REPORT - [Click to open] Operation : Identify [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM39) MODE : PRELOADER PORT PORT : 39 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1836 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x100000000 [ 4.00 GB ] EMMC: 150100525831344D42017907D60953A3 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RX14MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x747C00000 [ 29.12 GB ] CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 93AE5EE4BACE4156A48BAEA2CAEA17FE DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Display ID : YU5530_SW_V054_HW_M13_25032017 Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-08-01 Build Time : 1490422161 Product Model : YU5530 Product Brand : YU Product Name : YUNICORN Product Device : YUNICORN Product Board : mt6755 Product Manfct : YU Board Platform : mt6755 Product Info : YUNICORN USERDATA : PLAIN ( NOT encrypted ) IMEI[0] : 911509XXXXX7782 IMEI[1] : 9115XXXXXXX7790 NVRAM check : Passed! Done! Elapsed: 00:00:13 Operation : Read Security [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM39) MODE : PRELOADER PORT PORT : 39 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1836 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x100000000 [ 4.00 GB ] EMMC: 150100525831344D42017907D60953A3 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RX14MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x747C00000 [ 29.12 GB ] CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 93AE5EE4BACE4156A48BAEA2CAEA17FE DA : USB : HIGH-SPEED Boot done! SEC Data : IMEI[0] : 91150XXXXXXX782 IMEI[1] : 9115XXXXXX87790 NVRAM check : Passed! NVM saved as : MT6755__eMMC__9115XXXXXXX7782.mt_sec NVM saved to : C:\InfinityBox\CM2MT2\Backup\ Done! Elapsed: 00:00:31 Reconnect Power/Cable! Operation : Reset Settings/Format FS [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM39) MODE : PRELOADER PORT PORT : 39 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1836 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x100000000 [ 4.00 GB ] EMMC: 150100525831344D42017907D60953A3 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RX14MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x747C00000 [ 29.12 GB ] CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 93AE5EE4BACE4156A48BAEA2CAEA17FE DA : USB : HIGH-SPEED Boot done! Format Ok : USERDATA Format Ok : CACHE Format Ok : RESET PROTECTION Format Ok : PRIVACY Done! Elapsed: 00:00:53 Reconnect Power/Cable! THANKS INFINITY-BOX TEAM

12-01-2018, 16:11	#98 (permalink)
gracy_elec No Life Poster Join Date: Feb 2005 Location: GSM WORLD Posts: 2,079 Member: 118520 Status: Offline Thanks Meter: 3,551	LENOVO K8 NOTE XT1902-3 AND:8.0.0 MT6797 READ NVRAM BAG & BRUSH FRP Done SUCCESSFULLY READ NVRAM BAG & BRUSH FRP(LENOVO K8 NOTE XT1902-3 AND:8.0.0 MT6797)USB SUCCESS REPORT - [Click to open] Operation : Identify [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM39) MODE : PRELOADER PORT PORT : 39 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000001 BROM : SecMode : SBC BROM : PRELOADER PORT MODE : 0_base : BASE_v1836 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x100000000 [ 4.00 GB ] EMMC: 45010044463430363401A9C9F0134409 EMMC: VEN : SANDISK \| OEM : 01 \| DEV : DF4064 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 6E4C176E804169E5D3783F89DEA1C88 DA : USB : HIGH-SPEED Boot done! Patch Level : OMB27.43-67 Display ID : OMB27.43-67 Ver. CodeName : REL Ver. Release : 8.0.0 Sec. Patch : 2018-09-05 Build Time : 1536589975 Product Model : Lenovo K8 Note Product Brand : lenovo Product Name : manning_retail Product Device : manning Product Manfct : lenovo Product Info : manning Board Platform : mt6797 USERDATA : ENCRYPTED IMEI[0] : 8645XXXXXX9833 IMEI[1] : 8645XXXXXX3454 NVRAM check : Passed! Done! Elapsed: 00:00:22 Operation : Read Security [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM39) MODE : PRELOADER PORT PORT : 39 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000001 BROM : SecMode : SBC BROM : PRELOADER PORT MODE : 0_base : BASE_v1836 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x100000000 [ 4.00 GB ] EMMC: 45010044463430363401A9C9F0134409 EMMC: VEN : SANDISK \| OEM : 01 \| DEV : DF4064 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 6E4C176E804169E5D3783F89DEA1C88 DA : USB : HIGH-SPEED Boot done! SEC Data : IMEI[0] : 8645XXXXXXX9833 IMEI[1] : 8645XXXXXXXX454 NVRAM check : Passed! NVM saved as : MT6797__eMMC1__8645XXXXXXX9833.mt_sec NVM saved to : C:\InfinityBox\CM2MT2\Backup\ Done! Elapsed: 00:00:31 Reconnect Power/Cable! Operation : Reset Settings/Format FS [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM39) MODE : PRELOADER PORT PORT : 39 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000001 BROM : SecMode : SBC BROM : PRELOADER PORT MODE : 0_base : BASE_v1836 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6797 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x100000000 [ 4.00 GB ] EMMC: 45010044463430363401A9C9F0134409 EMMC: VEN : SANDISK \| OEM : 01 \| DEV : DF4064 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6797 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 6E4C176E804169E5D3783F89DEA1C88 DA : USB : HIGH-SPEED Boot done! Format Ok : RESET PROTECTION Done! Elapsed: 00:00:14 Reconnect Power/Cable! THANKS INFINITY-BOX TEAM

12-03-2018, 09:52	#99 (permalink)
gracy_elec No Life Poster Join Date: Feb 2005 Location: GSM WORLD Posts: 2,079 Member: 118520 Status: Offline Thanks Meter: 3,551	VIVO V5S 1713 AND:7.0 MT6750 READ NVRAM BAG & BRUSH STUCK ON LOGO Done SUCCESSFULLY READ NVRAM BAG & BRUSH STUCK ON LOGO(VIVO V5S 1713 AND:7.0 MT6750)USB SUCCESS REPORT - [Click to open] Operation : Identify [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM5) MODE : BOOTROM PORT : 5 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000005 BROM : SecMode : SBC+SDA BROM : BOOTROM MODE : Vivo : V5 \| Manual : Disabled BROM : SLA BROM : SLA Passed! AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : MT6755 EMI : SRC : preloader_bbk6750_66_n.bin EMI : CNT : 0007 EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX \| DEV : HBG4a2 : RAM : [ 4.00 GB ] EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100525831344D42 : VEN : SAMSUNG \| DEV : RX14MB : RAM : [ 4.00 GB ] EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG \| DEV : RX64MB : RAM : [ 4.00 GB ] EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG \| DEV : RH64MB : RAM : [ 4.00 GB ] EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 150100525831424D42 : VEN : SAMSUNG \| DEV : RX1BMB : RAM : [ 3.00 GB ] EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524531424D42 : VEN : SAMSUNG \| DEV : RE1BMB : RAM : [ 3.00 GB ] EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100524331344D42 : VEN : SAMSUNG \| DEV : RC14MB : RAM : [ 4.00 GB ] EMI : Init EMI from PRELOADER EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00000000 [ 0 B ] DRAM: 0x80000000 [ 2.00 GB ] EMMC: 150100524836344D420513006A4F34AB EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RH64MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000 RNID : 7B511F0ACCB4A79A9554C659DB34336D DA : USB : FULL-SPEED DA : USB : Change Port Speed PTFN : MediaTek DA USB VCOM (Android) (COM21) MODE : PRELOADER PORT PORT : 21 Boot done! Patch Level : NRD90M Display ID : NRD90M release-keys Ver. CodeName : REL Ver. Release : 7.0 Sec. Patch : 2018-10-05 Build Time : 1539744480 Product Model : vivo 1601 Product Brand : vivo Product Name : 1601 Product Device : 1601 Product Board : mt6750 Product Manfct : vivo Board Platform : mt6750 Product Info : bbk6750_66_n Product Model : PD1612DF_EX Done! Elapsed: 00:00:32 Operation : Read Security [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM5) MODE : BOOTROM PORT : 5 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000005 BROM : SecMode : SBC+SDA BROM : BOOTROM MODE : Vivo : V5 \| Manual : Disabled BROM : SLA BROM : SLA Passed! AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : MT6755 EMI : SRC : preloader_bbk6750_66_n.bin EMI : CNT : 0007 EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX \| DEV : HBG4a2 : RAM : [ 4.00 GB ] EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100525831344D42 : VEN : SAMSUNG \| DEV : RX14MB : RAM : [ 4.00 GB ] EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG \| DEV : RX64MB : RAM : [ 4.00 GB ] EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG \| DEV : RH64MB : RAM : [ 4.00 GB ] EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 150100525831424D42 : VEN : SAMSUNG \| DEV : RX1BMB : RAM : [ 3.00 GB ] EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524531424D42 : VEN : SAMSUNG \| DEV : RE1BMB : RAM : [ 3.00 GB ] EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100524331344D42 : VEN : SAMSUNG \| DEV : RC14MB : RAM : [ 4.00 GB ] EMI : Init EMI from PRELOADER EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00000000 [ 0 B ] DRAM: 0x80000000 [ 2.00 GB ] EMMC: 150100524836344D420513006A4F34AB EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RH64MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000 RNID : 7B511F0ACCB4A79A9554C659DB34336D DA : USB : FULL-SPEED DA : USB : Change Port Speed PTFN : MediaTek DA USB VCOM (Android) (COM21) MODE : PRELOADER PORT PORT : 21 Boot done! SEC Data : IMEI[0] : 8651XXXXXXXXX52 IMEI[1] : 8651XXXXXXX4445 IMEI[2] : 8654XXXXXXXX009 NVRAM check : Passed! NVM saved as : MT6755__eMMC__8651XXXXXXX4452.mt_sec NVM saved to : C:\InfinityBox\CM2MT2\Backup\ Done! Elapsed: 00:00:20 Reconnect Power/Cable! Operation : Write Flash [ v2.02 ] Repartition : Enabled Flash Verify : Disabled Reg.Pre-Erase : Disabled Verify HW/SW : Enabled SData Backup : Disabled Safe UserData : Disabled Files :2 [FL] : Set : cache.img [FL] : Set : userdata.img [FL] : Total size : 0x27B8A908 [ 635.54 MB ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM842) MODE : BOOTROM PORT : 842 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000005 BROM : SecMode : SBC+SDA BROM : BOOTROM MODE : Vivo : V5 \| Manual : Disabled BROM : SLA BROM : SLA Passed! AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : MT6755 EMI : SRC : preloader_bbk6750_66_n.bin EMI : CNT : 0007 EMI : [00] : eMCP : eMMC+LP/DDR3 , ID : 90014A484247346132 : VEN : HYNIX \| DEV : HBG4a2 : RAM : [ 4.00 GB ] EMI : [01] : eMCP : eMMC+LP/DDR3 , ID : 150100525831344D42 : VEN : SAMSUNG \| DEV : RX14MB : RAM : [ 4.00 GB ] EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG \| DEV : RX64MB : RAM : [ 4.00 GB ] EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG \| DEV : RH64MB : RAM : [ 4.00 GB ] EMI : [04] : eMCP : eMMC+LP/DDR3 , ID : 150100525831424D42 : VEN : SAMSUNG \| DEV : RX1BMB : RAM : [ 3.00 GB ] EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524531424D42 : VEN : SAMSUNG \| DEV : RE1BMB : RAM : [ 3.00 GB ] EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100524331344D42 : VEN : SAMSUNG \| DEV : RC14MB : RAM : [ 4.00 GB ] EMI : Init EMI from PRELOADER EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00000000 [ 0 B ] DRAM: 0x80000000 [ 2.00 GB ] EMMC: 150100524836344D420513006A4F34AB EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RH64MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000 RNID : 7B511F0ACCB4A79A9554C659DB34336D DA : USB : FULL-SPEED DA : USB : Change Port Speed PTFN : MediaTek DA USB VCOM (Android) (COM949) MODE : PRELOADER PORT PORT : 949 Boot done! [FL] : HW verification passed! SEC_DL : False (RAPHAEL) SEC_ID : 0x494E46494E495459424F584245535432 [FL] : RePartition [FL] : RePartition Ok! [FL] : Flashing now ... Write : CACHE Write : USERDATA SEC_DL : False (RAPHAEL) SEC_ID : 0x494E46494E495459424F584245535432 [FL] : RePartition [FL] : RePartition Ok! [FL] : Flashing finished! Done! Elapsed: 00:01:00 Reconnect Power/Cable! THANKS INFINITY-BOX TEAM

11-18-2018, 03:18	#94 (permalink)
Mobilekiller79 Insane Poster Join Date: Sep 2005 Location: Chandigarh Age: 44 Posts: 86 Member: 185064 Status: Offline Thanks Meter: 10	Dear shahid Model added after update with file given in link. But after update again getting same error in identifying orfactory/frp reset BROM : 0x00002001 : DA SEND ERROR! ERROR : SECURE BOOT : MISMATCH BOOT SIGNATURE! INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO Can you help me how to resolve it Thanks

12-04-2018, 13:22	#100 (permalink)
gracy_elec No Life Poster Join Date: Feb 2005 Location: GSM WORLD Posts: 2,079 Member: 118520 Status: Offline Thanks Meter: 3,551	LEAGOO T5 AND:7.0 MT6750 READ NVRAM BAG Done SUCCESSFULLY READ NVRAM BAG NEED FOR SECURITY REPAIR(LEAGOO T5 AND:7.0 MT6750)USB SUCCESS REPORT - [Click to open] Operation : Identify [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM3) MODE : PRELOADER PORT PORT : 3 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1836 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x100000000 [ 4.00 GB ] EMMC: 150100524331344D42070A72DE96838D EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RC14MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 65EE4E0363808CABAB39B48ABB738E37 DA : USB : HIGH-SPEED Boot done! Patch Level : NRD90M Display ID : LEAGOO_T5_OS2.1_E_20181025 Ver. CodeName : REL Ver. Release : 7.0 Sec. Patch : 2018-08-05 Build Time : 1540450816 Product Model : T5 Product Brand : LEAGOO Product Name : T5 Product Device : T5 Product Board : Freeme Product Manfct : LEAGOO Board Platform : mt6750 Product Info : T5 USERDATA : ENCRYPTED IMEI[0] : 351XXXXXXXX852 IMEI[1] : 351XXXXXXX5860 NVRAM check : Passed! Done! Elapsed: 00:01:36 Operation : Read Security [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM3) MODE : PRELOADER PORT PORT : 3 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1836 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x100000000 [ 4.00 GB ] EMMC: 150100524331344D42070A72DE96838D EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RC14MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 65EE4E0363808CABAB39B48ABB738E37 DA : USB : HIGH-SPEED Boot done! SEC Data : IMEI[0] : 351XXXXXXXX852 IMEI[1] : 3519XXXXXXX860 NVRAM check : Passed! NVM saved as : MT6755__eMMC__3519XXXXXXX852.mt_sec NVM saved to : C:\InfinityBox\CM2MT2\Backup\ Done! Elapsed: 00:00:17 Reconnect Power/Cable! THANKS INFINITY-BOX TEAM

12-06-2018, 08:24	#102 (permalink)
gracy_elec No Life Poster Join Date: Feb 2005 Location: GSM WORLD Posts: 2,079 Member: 118520 Status: Offline Thanks Meter: 3,551	TECNO-IN2 AND:8.1.0 MT6739 BRUSH STUCK ON DECRYPTION UNSUCCESSFUL Done SUCCESSFULLY BRUSH STUCK ON DECRYPTION UNSUCCESSFUL(TECNO-IN2 AND:8.1.0 MT6739)USB SUCCESS REPORT - [Click to open] Operation : Identify [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM3) MODE : PRELOADER PORT PORT : 3 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000005 BROM : SecMode : SBC+SDA BROM : PRELOADER PORT MODE : TECNO : BASE_SECURE \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6739 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] EMMC: 150100514536334D42035B5069E252B EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : QE63MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x3A3E00000 [ 14.56 GB ] CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 325B878D5E93CE10750B6C4B4CA2C9BA DA : USB : HIGH-SPEED Boot done! Patch Level : O11019 Display ID : IN2-H391A-O-180329V106 Ver. CodeName : REL Ver. Release : 8.1.0 Sec. Patch : 2018-02-05 Build Time : 1522327435 Product Brand : TECNO Product Manfct : TECNO MOBILE LIMITED Product Model : TECNO IN2 Product Device : TECNO-IN2 Product Name : H391 Product Info : TECNO-IN2 Board Platform : mt6739 USERDATA : ENCRYPTED NVRAM check : Passed! Done! Elapsed: 00:00:17 Operation : Memory Tool Init [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM3) MODE : PRELOADER PORT PORT : 3 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000005 BROM : SecMode : SBC+SDA BROM : PRELOADER PORT MODE : TECNO : BASE_SECURE \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6739 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] EMMC: 150100514536334D42035B5069E252B EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : QE63MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x3A3E00000 [ 14.56 GB ] CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 325B878D5E93CE10750B6C4B4CA2C9BA DA : USB : HIGH-SPEED Boot done! Set default path : C:\InfinityBox\CM2MT2\phdata\ Ready! Operation : Erase Memory Erase selected partitions [4] [0] Erase partition : PROTECT1 Erase partition Ok! [1] Erase partition : PROTECT2 Erase partition Ok! [2] Erase partition : CACHE Erase partition Ok! [3] Erase partition : USERDATA Erase partition Ok! Operation finished! Operation : Erase Memory Erase selected partitions [1] [0] Erase partition : PERSIST Erase partition Ok! Operation finished! Close MemoryTool session Done! Elapsed: 00:07:29 Reconnect Power/Cable! Operation : Reset Settings/Format FS [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM3) MODE : PRELOADER PORT PORT : 3 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000005 BROM : SecMode : SBC+SDA BROM : PRELOADER PORT MODE : TECNO : BASE_SECURE \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6739 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] EMMC: 150100514536334D42035B5069E252B EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : QE63MB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x3A3E00000 [ 14.56 GB ] CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 325B878D5E93CE10750B6C4B4CA2C9BA DA : USB : HIGH-SPEED Boot done! Format Ok : USERDATA Format Ok : CACHE Done! Elapsed: 00:00:36 Reconnect Power/Cable! THANKS INFINITY-BOX TEAM

12-10-2018, 16:51	#103 (permalink)
gracy_elec No Life Poster Join Date: Feb 2005 Location: GSM WORLD Posts: 2,079 Member: 118520 Status: Offline Thanks Meter: 3,551	OPPO A83JS(2018)CPH-1729 AND:7.1.1 MT6763D BRUSH PATTERN,FRP & READ FIRMWARE BAG Done SUCCESSFULLY BRUSH PATTERN LOCK,FRP & READ FIRMWARE BAG (OPPO A83JS (2018) CPH-1729 AND:7.1.1 MT6763D NEW SECURITY[TP])USB SUCCESS REPORT - [Click to open] Operation : Identify [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM43) MODE : BOOTROM PORT : 43 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+SEL BROM : BOOTROM MODE : Oppo : F5 \| Manual : Disabled BROM : SLA BROM : SLA Passed! AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL_CRYPTO.bin AGENT : Found MT6763 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : MT6763 EMI : SRC : preloader_oppo6763_17031.bin EMI : CNT : 000F EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 0 B ] EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG \| DEV : DH6DMB : RAM : [ 4.00 GB ] EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG \| DEV : RX64MB : RAM : [ 4.00 GB ] EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG \| DEV : RH64AB : RAM : [ 4.00 GB ] EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG \| DEV : 3H6CMB : RAM : [ 6.00 GB ] EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG \| DEV : RH64MB : RAM : [ 4.00 GB ] EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG \| DEV : GD6BMB : RAM : [ 3.00 GB ] EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG \| DEV : GX6BMB : RAM : [ 3.00 GB ] EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG \| DEV : GE6BMB : RAM : [ 3.00 GB ] EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG \| DEV : RD64MB : RAM : [ 4.00 GB ] EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : MICRON \| DEV : S0J9B7 : RAM : [ 3.00 GB ] EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 4.00 GB ] EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 4.00 GB ] EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 6.00 GB ] EMI : Init EMI from PRELOADER EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0xC0000000 [ 3.00 GB ] EMMC: 15010052483634414205F433E04C35C9 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RH64AB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 9F60EE228C72E5A692A3D8BCD827D0E5 DA : USB : HIGH-SPEED Boot done! Patch Level : N6F26Q Ver. CodeName : REL Ver. Release : 7.1.1 Sec. Patch : 2018-09-05 Build Time : 1537620962 Product Manfct : OPPO Board Platform : mt6763 Product Model : OPPO A83js Product Brand : OPPO Product Name : A83js Product Device : M6763D Product Board : full_oppo6763_17101 Product Info : oppo6763_17101 SW Version : A.21 SW OTA Version : M6763D_11.A.21_0210_201809221912 SW OTA Name : A83jsEX_11_A.21_180922 Display ID : A83jsEX_11_A.21_180922 Kernel Info : 4.4.22-G201809221912 USERDATA : ENCRYPTED NVRAM check : Passed! Done! Elapsed: 00:14:00 Operation : Reset Settings/Format FS [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM43) MODE : BOOTROM PORT : 43 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+SEL BROM : BOOTROM MODE : Oppo : F5 \| Manual : Disabled BROM : SLA BROM : SLA Passed! AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL_CRYPTO.bin AGENT : Found MT6763 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : MT6763 EMI : SRC : preloader_oppo6763_17031.bin EMI : CNT : 000F EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 0 B ] EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG \| DEV : DH6DMB : RAM : [ 4.00 GB ] EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG \| DEV : RX64MB : RAM : [ 4.00 GB ] EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG \| DEV : RH64AB : RAM : [ 4.00 GB ] EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG \| DEV : 3H6CMB : RAM : [ 6.00 GB ] EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG \| DEV : RH64MB : RAM : [ 4.00 GB ] EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG \| DEV : GD6BMB : RAM : [ 3.00 GB ] EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG \| DEV : GX6BMB : RAM : [ 3.00 GB ] EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG \| DEV : GE6BMB : RAM : [ 3.00 GB ] EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG \| DEV : RD64MB : RAM : [ 4.00 GB ] EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : MICRON \| DEV : S0J9B7 : RAM : [ 3.00 GB ] EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 4.00 GB ] EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 4.00 GB ] EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 6.00 GB ] EMI : Init EMI from PRELOADER EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0xC0000000 [ 3.00 GB ] EMMC: 15010052483634414205F433E04C35C9 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RH64AB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 9F60EE228C72E5A692A3D8BCD827D0E5 DA : USB : HIGH-SPEED Boot done! Format Ok : USERDATA Format Ok : CACHE Format Ok : RESET PROTECTION Done! Elapsed: 00:00:56 Reconnect Power/Cable! Operation : Read Firmware [ v2.02 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM43) MODE : BOOTROM PORT : 43 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+SEL BROM : BOOTROM MODE : Oppo : F5 \| Manual : Disabled BROM : SLA BROM : SLA Passed! AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL_CRYPTO.bin AGENT : Found MT6763 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : MT6763 EMI : SRC : preloader_oppo6763_17031.bin EMI : CNT : 000F EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 0 B ] EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG \| DEV : DH6DMB : RAM : [ 4.00 GB ] EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG \| DEV : RX64MB : RAM : [ 4.00 GB ] EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG \| DEV : RH64AB : RAM : [ 4.00 GB ] EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG \| DEV : 3H6CMB : RAM : [ 6.00 GB ] EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG \| DEV : RH64MB : RAM : [ 4.00 GB ] EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG \| DEV : GD6BMB : RAM : [ 3.00 GB ] EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG \| DEV : GX6BMB : RAM : [ 3.00 GB ] EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG \| DEV : GE6BMB : RAM : [ 3.00 GB ] EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG \| DEV : RD64MB : RAM : [ 4.00 GB ] EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : MICRON \| DEV : S0J9B7 : RAM : [ 3.00 GB ] EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 4.00 GB ] EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 4.00 GB ] EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 6.00 GB ] EMI : Init EMI from PRELOADER EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0xC0000000 [ 3.00 GB ] EMMC: 15010052483634414205F433E04C35C9 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : RH64AB EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 9F60EE228C72E5A692A3D8BCD827D0E5 DA : USB : HIGH-SPEED Boot done! Patch Level : N6F26Q Ver. CodeName : REL Ver. Release : 7.1.1 Sec. Patch : 2018-09-05 Build Time : 1537620962 Product Manfct : OPPO Board Platform : mt6763 Product Model : OPPO A83js Product Brand : OPPO Product Name : A83js Product Device : M6763D Product Board : full_oppo6763_17101 Product Info : oppo6763_17101 SW Version : A.21 SW OTA Version : M6763D_11.A.21_0210_201809221912 SW OTA Name : A83jsEX_11_A.21_180922 Display ID : A83jsEX_11_A.21_180922 Kernel Info : 4.4.22-G201809221912 MT6763__OPPO__OPPO_A83js__7.1.1__A83jsEX_11_A.21_1 80922__N6F26Q__oppo6763_17101 Read : preloader.bin Read : recovery.img Read : oppo_custom.img Read : persist.img ExtSparse : Compression ratio : 100% Read : proinfo.img Read : md1rom.img Read : md1dsp.img Read : spmfw.img Read : tinysys-sspm.bin Read : nvram.bin Read : lk.bin Read : boot.img Read : logo.bin Read : tz.img Read : system.img ExtSparse : Compression ratio : 4% Read : cache.img Read : userdata.img FW Size : 5.09 GB Android Info saved : _Android_info.txt Scatter : MT6763_Android_scatter.txt Saved to : D:\MT6763__OPPO__OPPO_A83js__7.1.1__A83jsEX_11_A.2 1_180922__N6F26Q__oppo6763_17101\ Done! Elapsed: 00:20:55 THANKS INFINITY-BOX TEAM