G100h MTK6572 can't reading or writing firmware help please - GSM-Forum

AEK@GSM · 12-28-2015, 09:50

Dear support infinity

i have g100h mt6572 4.4.4 can't reading firmware

Wait for phone...
Phone found! [ 242 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00EC00BC00000055005400EC00BC0000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0083 , [SAMSUNG] KA100O015B_BJTT
[NAND] : FLASH_DIE : 00EC 00BC 0000 0055 0054 00EC 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/00/NIM_Px-2
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Info read not done

Erased phone or unsupported FlashIc?
You can change settings : Settings -> Other -> NAND init Mode

Done!

p.k510 · 12-28-2015, 10:04

Quote:

Originally Posted by AEK@GSM

Dear support infinity

i have g100h mt6572 4.4.4 can't reading firmware

Wait for phone...
Phone found! [ 242 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00EC00BC00000055005400EC00BC0000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0083 , [SAMSUNG] KA100O015B_BJTT
[NAND] : FLASH_DIE : 00EC 00BC 0000 0055 0054 00EC 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/00/NIM_Px-2
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Info read not done

Erased phone or unsupported FlashIc?
You can change settings : Settings -> Other -> NAND init Mode

Done!

this time not support nand cpu

sky73 · 12-28-2015, 11:06

Seriously nand flash should be in next update

Steve-1 · 12-28-2015, 12:22

are you tried with this : Settings -> Other -> NAND init Mode
?

JayDi · 12-28-2015, 18:29

Quote:

Originally Posted by p.k510

this time not support nand cpu

Quote:

Originally Posted by sky73

Seriously nand flash should be in next update

Seems as there is also good idea to BAN for FAKE answer. If you guys have nothing to say - better keep silence.

FW can be read by checking "NAND Ext" and "Factory FW" from ANY NAND phone.

sky73 · 12-29-2015, 03:50

Quote:

Originally Posted by JayDi

Seems as there is also good idea to BAN for FAKE answer. If you guys have nothing to say - better keep silence.

FW can be read by checking "NAND Ext" and "Factory FW" from ANY NAND phone.

Im soo soory sir jaydi i never wanna say bad word about u
We love u
.
and ok never im never act like amatuer
So forgive me

sky73 · 12-29-2015, 04:31

Quote:

Originally Posted by sky73

Seriously nand flash should be in next update

This not answare just a request
Meybe because of bad English be like that soory anway

p.k510 · 12-29-2015, 05:14

bro only nand cpu 6571/72 read f w but no write why not full support

12-28-2015, 09:50	#1 (permalink)
AEK@GSM Freak Poster Join Date: May 2013 Location: algeria Posts: 173 Member: 1933548 Status: Offline Thanks Meter: 19	G100h MTK6572 can't reading or writing firmware help please Dear support infinity i have g100h mt6572 4.4.4 can't reading firmware Wait for phone... Phone found! [ 242 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6572 BB_CPU_HW : CA01 BB_CPU_SW : 8A00 BB_CPU_SB : 0000 BB_CPU_NM : [MediaTek] MT6572_S00 Processing BROM stage BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v5.1540.01.01 NAND_ID : 00EC00BC00000055005400EC00BC0000 eMMC_ID : 00000000000000000000000000000000 DA Stat : v4.2 on BBID : 0x88 DA Sent. Configure setting now ... DA started successuflly NAND FlashIC initialized [NAND] : FLASH_VEN : 0x0083 , [SAMSUNG] KA100O015B_BJTT [NAND] : FLASH_DIE : 00EC 00BC 0000 0055 0054 00EC 00BC [NAND] : FLASH_LEN : 0x20000000 [NAND] : FLASH_EXT : 0800/0040/00/NIM_Px-2 INT RAM : 0x00020000 EXT RAM : 0x10000000 BOOT TYPE : NAND_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Info read not done Erased phone or unsupported FlashIc? You can change settings : Settings -> Other -> NAND init Mode Done!

12-28-2015, 12:22	#4 (permalink)
Steve-1 No Life Poster Join Date: Dec 2015 Location: hossting Posts: 1,154 Member: 2501288 Status: Offline Thanks Meter: 328	are you tried with this : Settings -> Other -> NAND init Mode ? Last edited by Steve-1; 12-28-2015 at 12:29.

12-28-2015, 11:06	#3 (permalink)
sky73 No Life Poster Join Date: Jan 2013 Location: gsmhosting Age: 29 Posts: 1,148 Member: 1876736 Status: Offline Thanks Meter: 735	Seriously nand flash should be in next update

12-29-2015, 05:14	#8 (permalink)
p.k510 No Life Poster Join Date: Jun 2012 Location: bhopal Posts: 532 Member: 1778370 Status: Offline Sonork: sujan_goa Thanks Meter: 66	bro only nand cpu 6571/72 read f w but no write why not full support