Infinity-Box Chinese Miracle-2 RKT/RockChip v2.00 - New CPUs, TVbox, Tablets and more - Page 5 - GSM-Forum

JayDi · 07-08-2017, 14:03

Factory UIMG flashing activated :

Code:

Loading firmware ... 
Detected RockChip UnionImage
UIMGModel : rk3026
UIMGInfo  : RK30SDK
Machine : RK3066
Device  : RK3026
Version : 4.2.2

Load Ok!

Operation : Write Firmware [ v2.01 ]

----- > Phone/Tablet : 
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box : 
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ... 
Device Connected!
Interface test : Passed

Device mode : Normal [ LOADER OPEN ]

Machine : RK3066
Device  : RK3026
ExtInfo : 4.2.2

SoC CPU : 302A
SoC PDT : 2013
SoC SWN : 0529
SoC REV : V101

Flash CSx  : 0x00
Flash Type : ADDE14A742 [ NAND ] 
Flash Vend : HYNIX
Flash Size : 0x0000000212000000 ( 8,28 GiB )
Flash Info : 4194304/16384/32/40/1

Connect Ok!

Loading firmware

UnionImage container info : 
File [1] : RK3026Loader(L)_V2.09.bin
File [2] : parameter
File [3] : Image/misc.img
File [4] : Image/kernel.img
File [5] : Image/boot.img
File [6] : Image/recovery.img
File [7] : Image/system.img
File [8] : backupimage/backup.img
File [9] : update-script
File [10] : recover-script

Skip IDB processing
Initialize PMT ... 
Flashing : Image/misc.img
Flashing : Image/kernel.img
Flashing : Image/boot.img
Flashing : Image/recovery.img
Flashing : backupimage/backup.img
Flashing : Image/system.img


Flashing finished!

Done!
Elapsed: 00:01:34

JayDi · 07-08-2017, 14:10

One more sample :

Code:

Loading firmware ... 
Detected RockChip UnionImage
UIMGModel : rk30sdk
UIMGInfo  : RK30SDK
Machine : RK3066
Device  : RK30SDK
Version : 4.4.2

Load Ok!

Operation : Write Firmware [ v2.01 ]

----- > Phone/Tablet : 
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box : 
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ... 
Device Connected!
Interface test : Passed

Device mode : Normal [ LOADER OPEN ]

Machine : RK3066
Device  : RK30SDK
ExtInfo : 4.4.2

SoC CPU : 302A
SoC PDT : 2013
SoC SWN : 0529
SoC REV : V101

Flash CSx  : 0x00
Flash Type : ADDE14A742 [ NAND ] 
Flash Vend : HYNIX
Flash Size : 0x0000000212000000 ( 8,28 GiB )
Flash Info : 4194304/16384/32/40/1

Connect Ok!

Loading firmware

UnionImage container info : 
File [1] : RK3026Loader(L)_V2.16.bin
File [2] : parameter
File [3] : Image/misc.img
File [4] : Image/boot.img
File [5] : Image/recovery.img
File [6] : Image/system.img
File [7] : backupimage/backup.img
File [8] : update-script
File [9] : recover-script

Skip IDB processing
Initialize PMT ... 
Flashing : Image/misc.img
Flashing : Image/boot.img
Flashing : Image/recovery.img
Flashing : backupimage/backup.img
Flashing : Image/system.img


Flashing finished!

Done!
Elapsed: 00:02:43

raku12587 · 07-10-2017, 11:34

i tried so many time to connect samsung QLM model... its dosent connect, even i tried diffrent pc...

raku12587 · 07-10-2017, 11:35

i tried so many time to connect samsung QLM model... its dosent connect, even i tried diffrent pc.
i dnt knw what is problem.. pls suggest me...
can i use infinity cm2 in windows10????
thank u

localizator · 07-10-2017, 21:03

Quote:

Originally Posted by raku12587

i tried so many time to connect samsung QLM model... its dosent connect, even i tried diffrent pc.
i dnt knw what is problem.. pls suggest me...
can i use infinity cm2 in windows10????
thank u

samsung not supported QLM, only china phone

estil1980 · 07-10-2017, 23:05

Please infinity team add support allwiner axx.......

localizator · 07-10-2017, 23:17

Quote:

Originally Posted by estil1980

Please infinity team add support allwiner axx.......

JayDi already wrote that it maybe add in the future, but it will not be soon. There is no time for this now

.:cr@ck:. · 07-11-2017, 02:49

Quote:

Originally Posted by raku12587

i tried so many time to connect samsung QLM model... its dosent connect, even i tried diffrent pc.
i dnt knw what is problem.. pls suggest me...
can i use infinity cm2 in windows10????
thank u

Samsung Model supported only for flash now in samsung module(mayb they can update features soon)...yes you can use cm2 on win10😎..

Sent from my Moto G Play using Tapatalk

28179 · 04-23-2018, 16:50

hi
readed file is not Seamlessly.
Which one to choose?for flashing
image of readed files:

kopito · 08-07-2018, 21:47

im try to frp to speadtrum chipset tablet, software say say but still frp on, please help

AgicAga · 02-08-2019, 00:45

RIPORT SUCESED

Quote:

Card found : XXXXX , v0136
Infinity-Box RockChip Service Tool [RKT] v2.01

Operation : Identify [ v2.01 ]

----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device Connected!
Interface test : Passed

Device mode : Normal [ LOADER OPEN ]

Machine : RK312X
Device : EM756
ExtInfo : 5.0.2

SoC CPU : 312A
SoC PDT : 2014
SoC SWN : 0730
SoC REV : V100

Flash CSx : 0x00
Flash Type : ADDE14A742 [ NAND ]
Flash Vend : HYNIX
Flash Size : 0x0000000212000000 ( 8,28 GiB )
Flash Info : 4194304/16384/32/40/1

Connect Ok!

Brand : rockchip
ProdName : rk312x
ProdModel : PO10039TAQ-10172MK3
Device : rk312x
AndroidVer: 5.1.1
Manufact. : rockchip
SysPatch : LMY47V
RKTxCPU : RK312X

Done!
Elapsed: 00:00:15

Operation : Reset UserLocks [ v2.01 ]

----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device lookup timeout! Breaking!

Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Operation : Reset UserLocks [ v2.01 ]

----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device lookup timeout! Breaking!

Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Operation : Reset UserLocks [ v2.01 ]

----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device lookup timeout! Breaking!

Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Operation : Reset UserLocks [ v2.01 ]

----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device lookup timeout! Breaking!

Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Operation : Reset UserLocks [ v2.01 ]

----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device Connected!
Interface test : Passed

Device mode : Normal [ LOADER OPEN ]

Machine : RK312X
Device : EM756
ExtInfo : 5.0.2

SoC CPU : 312A
SoC PDT : 2014
SoC SWN : 0730
SoC REV : V100

Flash CSx : 0x00
Flash Type : ADDE14A742 [ NAND ]
Flash Vend : HYNIX
Flash Size : 0x0000000212000000 ( 8,28 GiB )
Flash Info : 4194304/16384/32/40/1

Connect Ok!

Info : Device is not supported yet!

Operation : Read Firmware [ v2.01 ]

----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device lookup timeout! Breaking!

Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Operation : Read Firmware [ v2.01 ]

----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device Connected!
Interface test : Passed

Device mode : Normal [ LOADER OPEN ]

Machine : RK312X
Device : EM756
ExtInfo : 5.0.2

SoC CPU : 312A
SoC PDT : 2014
SoC SWN : 0730
SoC REV : V100

Flash CSx : 0x00
Flash Type : ADDE14A742 [ NAND ]
Flash Vend : HYNIX
Flash Size : 0x0000000212000000 ( 8,28 GiB )
Flash Info : 4194304/16384/32/40/1

Connect Ok!

Brand : rockchip
ProdName : rk312x
ProdModel : PO10039TAQ-10172MK3
Device : rk312x
AndroidVer: 5.1.1
Manufact. : rockchip
SysPatch : LMY47V
RKTxCPU : RK312X

DevInfo : RK312X__rockchip__rockchip__ANDR_v5.1.1__PO10039TA Q-10172MK3__rk312x__rk312x

Reading Flash Content ...

[Read Ok] : param.cfg
[Read Ok] : u-boot.img
[Read Ok] : misc.img
[Read Ok] : resource.raw
[Read Ok] : kernel.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : backup.img
[Read Ok] : system.img

Android Info saved!

Read finished!
Configuration : RK312X / ADDE14A742 [ NAND ]
Firmware Size : 1707 MiB

Done!
Elapsed: 00:04:19

Loading firmware ...
Detected RockChip Infinity package
Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand : rockchip
Device Manufact.: rockchip
Device Model : rk312x
Device CPU : RK312X
Device IntName : rk312x
Device Version : 5.1.1
CU_SWVer : rockchip
Device Compile : 9.5.2016 8:33:03
Device ExtInfo : PO10039TAQ-10172MK3

Load Ok!

Operation : Reset Settings [ v2.01 ]

----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...
Device Connected!
Interface test : Passed

Device mode : Normal [ LOADER OPEN ]

Machine : RK312X
Device : EM756
ExtInfo : 5.0.2

SoC CPU : 312A
SoC PDT : 2014
SoC SWN : 0730
SoC REV : V100

Flash CSx : 0x00
Flash Type : ADDE14A742 [ NAND ]
Flash Vend : HYNIX
Flash Size : 0x0000000212000000 ( 8,28 GiB )
Flash Info : 4194304/16384/32/40/1

Connect Ok!

Wiping UserData ...
Wipe DATA Ok!

Done!
Elapsed: 00:00:12

Upload in progress regards

jimkeystyle · 06-01-2020, 22:12

any help, have the same problem and i cannot solve it. Device Connected!
Device connection test not passed! Breaking!
Probably you boot device in wrong mode!

YellowBoss · 06-02-2020, 00:24

Quote:

Originally Posted by jimkeystyle

any help, have the same problem and i cannot solve it. Device Connected!
Device connection test not passed! Breaking!
Probably you boot device in wrong mode!

Please post software operation log text and your unit details

unlocker_007 · 12-16-2020, 14:31

Quote:

Originally Posted by Deepesh Sharma

REALLY BOOM UPDATE FROM TEAM REALLY HARD WORK

World's 1st Full Support Ricoh Forstar Ft970 Tablet Stuck On Logo Recover(Rock-chip)

bro I need this firmware can u plz share or upload here

YellowBoss · 01-02-2021, 21:54

Quote:

Originally Posted by unlocker_007

bro I need this firmware can u plz share or upload here

This firmware you can download from Infinity support area Forestar/RK30XX_rockchip_Cortex_A9_ANDR_v4.1.1_FT970_rk30sd k_FORESTAR_FT970

07-10-2017, 11:34	#63 (permalink)
raku12587 Insane Poster Join Date: Sep 2012 Location: india Age: 36 Posts: 79 Member: 1807959 Status: Offline Thanks Meter: 17	i tried so many time to connect samsung QLM model... its dosent connect, even i tried diffrent pc...

07-10-2017, 11:35	#64 (permalink)
raku12587 Insane Poster Join Date: Sep 2012 Location: india Age: 36 Posts: 79 Member: 1807959 Status: Offline Thanks Meter: 17	i tried so many time to connect samsung QLM model... its dosent connect, even i tried diffrent pc. i dnt knw what is problem.. pls suggest me... can i use infinity cm2 in windows10???? thank u

07-10-2017, 23:05	#66 (permalink)
estil1980 Freak Poster Join Date: Oct 2006 Posts: 342 Member: 364299 Status: Offline Thanks Meter: 53	Please infinity team add support allwiner axx.......

04-23-2018, 16:50	#69 (permalink)
28179 Freak Poster Join Date: Nov 2009 Location: gonbad-iran Posts: 178 Member: 1155715 Status: Offline Sonork: ahmad.derakhshan61 Thanks Meter: 23	hi readed file is not Seamlessly. Which one to choose?for flashing image of readed files:

08-07-2018, 21:47	#70 (permalink)
kopito No Life Poster Join Date: May 2010 Location: Argentina Posts: 501 Member: 1314806 Status: Offline Sonork: 100.1000 Thanks Meter: 80	im try to frp to speadtrum chipset tablet, software say say but still frp on, please help

06-01-2020, 22:12	#72 (permalink)
jimkeystyle Junior Member Join Date: Jun 2017 Location: brazil Posts: 32 Member: 2726882 Status: Offline Thanks Meter: 2	any help, have the same problem and i cannot solve it. Device Connected! Device connection test not passed! Breaking! Probably you boot device in wrong mode!