Infinity Chinese Miracle-2 MTK/MediaTek v2.27 - MT6853, MT6853, Samsung, FireFly etc. - Page 5 - GSM-Forum

Nasri Rama · 07-25-2021, 21:59

Quote:

Originally Posted by Nasri Rama

Here it is...

https://mega.nz/file/nRxQ2BIT#QSZ9IQ...7mCcoqavHJeRRE

This phone has Admin App (unpaid bill) and does not allow to do anything except Calling..
No Camera
No sms
No browser
No Gallery and all other App you can use it
Lastly, the admin app restrict even to enter Developer mode so no ABD at all..
What i did is..
1. Smart reset extra
2. Read and wipe Persist
All failed.

kisekka · 07-26-2021, 06:20

The same on A10s kg state locked

Nasri Rama · 07-26-2021, 09:20

Quote:

Originally Posted by Nasri Rama

This phone has Admin App (unpaid bill) and does not allow to do anything except Calling..
No Camera
No sms
No browser
No Gallery and all other App you can use it
Lastly, the admin app restrict even to enter Developer mode so no ABD at all..
What i did is..
1. Smart reset extra
2. Read and wipe Persist
All failed.

Finally i managed to solve my problem.. 👍💪

kazzy4real · 07-26-2021, 10:52

Quote:

Originally Posted by Nasri Rama

Finally i managed to solve my problem.. 👍💪

Pls provide details of the solution

Sent from my SM-G977P using Tapatalk

kisekka · 07-27-2021, 05:38

How did you do it bcoz it may help me solve samsung A10s mkopa app

rodel_s · 07-27-2021, 08:38

great update i apreciate

geo/mobile · 07-27-2021, 09:01

v g update ,,,,,,,,,,,,thanks

geo/mobile · 07-27-2021, 11:09

Code:

Operation : Identify [ v2.27 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1633 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Zion
     TYPE : MODERN [RAPHAEL]
BROM : MEID : A57E7D2838C924336D067AC309A9F8C0
BROM : SecLevel : 0x000000E3
BROM : SecMode  : SBC+SLA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 5CCA0360746F66B3FB7BFE0D4211C10C5AC35DC7AFD9B1B872438B8065D434DF
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : SLA : Look for EMI
BROM : SLA : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_dura64.bin
     EMI : CNT : 000B
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 150100514536334D42043CCB9BA445A7
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514536334D42
        EMMC: VEN : SAMSUNG : QE63MB
        EMMC: SNN : 1019976612 ( 0x3CCB9BA4) , MF : 4/2018

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E4C8277B6B0B5FB62F53B1612EC7B4C0

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : B007
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2019-06-05
Build Time     : 10.06.2019
Product Model  : DRA-LX2
Product Brand  : HUAWEI
Product Name   : DRA-LX2
Product Device : HWDRA-M
Product Manfct : HUAWEI
Product Info   : dura64
Product Board  : DRA-LX2
Board Platform : mt6739

USERDATA : FILESYSTEM : F2FS  with FBE ( File-Base Encryption )

NVRAM check : Passed!
NVRAM : SEC NORMAL  [ No extra security ]

Backup sensetive data [ 16 ]
Backup path : Backup\MT6739__A57E7D2838C924336D067AC309A9F8C0\
[21] Read : NVRAM
[7] Read : NVDATA
[14] Read : PROINFO
[26] Read : LK
[6] Read : NVCFG
[10] Read : PROTECT1
[11] Read : PROTECT2
[1] Read : PGPT
[0] Read : PRELOADER
Backup done!


STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : NOT Enabled!

Done!
Elapsed: 00:00:19

iftikharrana58 · 07-27-2021, 14:36

infinix hot 9 play frp done

Operation : Identify [ v2.27 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : B42D5B3A0983201189780116E716B1D7
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : FEE0203A1609A01984F5D6BB0564A1505AA00B0E657C77E81F 5AA432A64A3732
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Look for EMI
BROM : SLA : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_x680b_h6215.bin
EMI : CNT : 0011
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: CID : 90014A68433861503E03005248DF6747
EMMC: VEN : HYNIX : OEM : 74 : ID : 68433861503E
EMMC: VEN : HYNIX : hC8aP>
EMMC: SNN : 5392607 ( 0x005248DF) , MF : 6/2020

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 2C9B19EBFEAC3601D87137B01B89DE5C

DA : USB : HIGH-SPEED

Boot done!

Product Brand : Infinix
Product Device : Infinix-X680B
Product Model : Infinix X680B
Product Name : X680B-OP
Patch Level : QP1A.190711.020
Display ID : X680B-H6215EFIJ-Q-OP-200629V139
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-06-05
Build Time : 29.06.2020
Product Info : x680b_h6215
Product Board : Infinix-X680B
Board Platform : mt6765
Product Manfct : INFINIX MOBILITY LIMITED

USERDATA : FILESYSTEM : F2FS with FBE ( File-Base Encryption )

NVRAM check : Passed!
NVRAM : SEC NORMAL [ No extra security ]

Backup sensetive data [ 16 ]
Backup path : Backup\MT6765__B42D5B3A0983201189780116E716B1D7\
[26] Read : NVRAM
[10] Read : NVDATA
[3] Read : PROINFO
[27] Read : LK
[9] Read : NVCFG
[12] Read : PROTECT1
[13] Read : PROTECT2
[1] Read : PGPT
[11] Read : PERSIST
[0] Read : PRELOADER
Backup done!

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!

PRELOADER : DEVICE :
DEV : MT6765
NME : preloader_x680b_h6215.bin
CNT : 0011
EMI : [00] : eMMC : LP_DDR4X : ID : 90014A684445615033 : VEN : HYNIX | DEV : hDEaP3 : RAM : [ 6.00 GB ]
EMI : [01] : eMMC : LP_DDR4X : ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMMC : LP_DDR4X : ID : 150100444836444142 : VEN : SAMSUNG | DEV : DH6DAB : RAM : [ 4.00 GB ]
EMI : [03] : eMMC : LP_DDR4X : ID : 150100334836434142 : VEN : SAMSUNG | DEV : 3H6CAB : RAM : [ 6.00 GB ]
EMI : [04] : eMMC : LP_DDR4X : ID : 150100335636434D42 : VEN : SAMSUNG | DEV : 3V6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMMC : LP_DDR4X : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : [06] : eMMC : LP_DDR4X : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 6.00 GB ]
EMI : [07] : eMMC : LP_DDR4X : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 4.00 GB ]
EMI : [08] : eMMC : LP_DDR4X : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 6.00 GB ]
EMI : [09] : eMMC : LP_DDR4X : ID : 90014A684339615033 : VEN : HYNIX | DEV : hC9aP3 : RAM : [ 4.00 GB ]
EMI : [0A] : eMMC : LP_DDR4X : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 3.00 GB ]
EMI : [0B] : eMMC : LP_DDR4X : ID : 150100445036384D42 : VEN : SAMSUNG | DEV : DP68MB : RAM : [ 3.00 GB ]
EMI : [0C] : eMMC : LP_DDR4X : ID : 13014E53304A394B39 : VEN : MICRON | DEV : S0J9K9 : RAM : [ 4.00 GB ]
EMI : [0D] : eMMC : LP_DDR4X : ID : 150100445636444142 : VEN : SAMSUNG | DEV : DV6DAB : RAM : [ 4.00 GB ]
EMI : [0E] : eMMC : LP_DDR4X : ID : 150100445036444142 : VEN : SAMSUNG | DEV : DP6DAB : RAM : [ 4.00 GB ]
EMI : [0F] : eMMC : LP_DDR4X : ID : 150100445636444D42 : VEN : SAMSUNG | DEV : DV6DMB : RAM : [ 4.00 GB ]
EMI : [10] : eMMC : LP_DDR4X : ID : 150100444436384D42 : VEN : SAMSUNG | DEV : DD68MB : RAM : [ 3.00 GB ]
PRELOADER saved to : Backup\PRELOADER\preloader_x680b_h6215.bin

Done!
Elapsed: 00:01:04

Operation : Reset Settings/Format FS [ v2.27 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : B42D5B3A0983201189780116E716B1D7
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : FEE0203A1609A01984F5D6BB0564A1505AA00B0E657C77E81F 5AA432A64A3732
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_x680b_h6215.bin
EMI : CNT : 0011
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: CID : 90014A68433861503E03005248DF6747
EMMC: VEN : HYNIX : OEM : 74 : ID : 68433861503E
EMMC: VEN : HYNIX : hC8aP>
EMMC: SNN : 5392607 ( 0x005248DF) , MF : 6/2020

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 2C9B19EBFEAC3601D87137B01B89DE5C

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825657

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:37

Reconnect Power/Cable!

Operation : Reset Settings/Format FS [ v2.27 ]

Mode : FULL FACTORY ( WIPE + FRP )

Info : Operation break by user!

Reconnect Power/Cable!

iftikharrana58 · 07-27-2021, 17:27

vivo y90 smart reset done

Operation : Identify [ v2.27 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 81E376CA9CFAFA603984065745C6ADC6
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 3FA70FB43C65C2310A5D8DAE29E6CA799358FF161E1EC1AF0A EC3A43DF5ABB8E
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Look for EMI
BROM : SLA : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_k61v1_64_bsp.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A400 [ 233.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: CID : 150100514436334D42011A02977486AF
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42
EMMC: VEN : SAMSUNG : QD63MB
EMMC: SNN : 436377460 ( 0x1A029774) , MF : 8/2019

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 8B77455ABBEA7FB62846EF282B3F8C56

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Display ID : O11019 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2020-09-01
Build Time : 13.10.2020
Product Model : vivo 1812
Product Brand : vivo
Product Name : PD1917F_EX
Product Device : PD1917F_EX
Product Manfct : vivo
Product Info : k61v1_64_bsp
Board Platform : mt6761

USERDATA : FILESYSTEM : EXT4 with FDE ( Full Disk Encryption *)

NVRAM check : Passed!
NVRAM : SEC NORMAL [ No extra security ]

Backup sensetive data [ 16 ]
Backup path : Backup\MT6761__81E376CA9CFAFA603984065745C6ADC6\
[29] Read : NVRAM
[8] Read : NVDATA
[19] Read : PROINFO
[30] Read : LK
[7] Read : NVCFG
[14] Read : PROTECT1
[15] Read : PROTECT2
[1] Read : PGPT
[17] Read : PERSIST
[0] Read : PRELOADER
Backup done!

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!

PRELOADER : DEVICE :
DEV : MT6761
NME : preloader_k61v1_64_bsp.bin
CNT : 0006
EMI : [00] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG | DEV : QD63MB : RAM : [ 2.00 GB ]
PRELOADER saved to : Backup\PRELOADER\preloader_k61v1_64_bsp.bin

Done!
Elapsed: 00:00:35

Operation : Reset Settings/Format FS [ v2.27 ]

Mode : SMART RESET

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN [RAPHAEL]
BROM : MEID : 81E376CA9CFAFA603984065745C6ADC6
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 3FA70FB43C65C2310A5D8DAE29E6CA799358FF161E1EC1AF0A EC3A43DF5ABB8E
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_k61v1_64_bsp.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A400 [ 233.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: CID : 150100514436334D42011A02977486AF
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42
EMMC: VEN : SAMSUNG : QD63MB
EMMC: SNN : 436377460 ( 0x1A029774) , MF : 8/2019

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 8B77455ABBEA7FB62846EF282B3F8C56

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x805757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!
Elapsed: 00:00:38

Reconnect Power/Cable!

Shensohau · 07-28-2021, 01:52

Hi, possible add KG Locked Remove and MDM for Samsung MTK Models??? thanks

nimzath · 07-28-2021, 05:37

i was tried several operating system and bit version windows 7 32 bit and windows 10 64 bit when i try operation reset i got the division by zero error

Operation : Reset Settings/Format FS [ v2.27 ]
Mode : FULL FACTORY ( WIPE + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 0217621E821F6ECB74E5D17DE818F4D9
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : B819170BC3584F0CEB5F4193F4D519B0DE97CE658DFED8FBFD 89216282F95922
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F

malik zeshan · 07-28-2021, 12:21

good update team...........................

Yusuf Lawal · 07-28-2021, 15:53

Operation : Read Firmware [ v2.26 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 5EF45DEABD291B8DE324089AD88CBD80
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 0ED27DD51FF71ABE780C644A078BB6CCF579C9BCC7C6021944 B64CF3769CCE8F
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0001
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: CID : 150100445036384D42026C776854288F
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445036384D42
EMMC: VEN : SAMSUNG : DP68MB
EMMC: SNN : 1819764820 ( 0x6C776854) , MF : 2/2021

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 58E1EEFCE8A6B7C81E9CC31CB554BA0

DA : USB : HIGH-SPEED

Boot done!

Product Brand : TECNO
Product Device : TECNO-KF6i
Product Model : TECNO KF6i
Product Name : KF6i-OP
Patch Level : RP1A.200720.011
Display ID : KF6i-H6218EFK-R-OP-210528V128
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-05-05
Build Time : 27.05.2021
Product Info : kf6j_h6218
Product Board : TECNO-KF6i
Board Platform : mt6765
Product Manfct : TECNO MOBILE LIMITED

MT6765__11__KF6i-H6218EFK-R-OP-210528V128__RP1A.200720.011__kf6j_h6218

Unsupport : 0x0000000014800000 : 0x0000000006400000 : md1img_a

Error : Device NOT supported for SAFE READ!
>>> Send log and report.log (if exists) to support! Include device info also!

Reconnect Power/Cable!

IMEI_info · 07-28-2021, 16:50

Read flash not work can fix in next update?
Dump from device sended to PM, why my older topic about same problems are deleted, I do something not correct or what ?

Quote:

Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.27

Load IDBase v718267 Ok!

Update configuration ...
Update Ok!
Load IDBase v718267 Ok!

Operation : Identify [ v2.27 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 498383D341564A12826F3871F9FC9840
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 3C0291EA9D433E19705E73F788DA56AF4A7965B3B3C9EAFFF1 87695BC112D5F1
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Look for EMI
BROM : SLA : EMI found!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_hongkong.bin
EMI : CNT : 0007
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: CID : 880103534C4433324755CE285C904867
EMMC: VEN : FORESEE : OEM : 3 : ID : 534C44333247
EMMC: VEN : FORESEE : SLD32G
EMMC: SNN : 3458751632 ( 0xCE285C90) , MF : 4/2021

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x73A000000 [ 28.91 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 97E06591C8361964EDEBB9BF2BE30073

DA : USB : HIGH-SPEED

Boot done!

Patch Level : RP1A.200720.011
Display ID : RP1A.200720.011 release-keys
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-03-05
Build Time : 26.04.2021
Product Info : hongkong
Product Board : hongkong
Board Platform : mt6765
Product Manfct : TCL

USERDATA : FILESYSTEM : F2FS with FBE ( File-Base Encryption )

NVRAM check : Passed!
NVRAM : SEC NORMAL [ No extra security ]

Backup sensetive data [ 16 ]
Backup path : Backup\MT6765__498383D341564A12826F3871F9FC9840\
[3] Read : NVRAM
[12] Read : NVDATA
[2] Read : PROINFO
[11] Read : NVCFG
[15] Read : PROTECT1
[16] Read : PROTECT2
[1] Read : PGPT
[17] Read : PERSIST
[0] Read : PRELOADER
Backup done!

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : LOCKED!

Done!
Elapsed: 00:00:44

Operation : Read Firmware [ v2.27 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 498383D341564A12826F3871F9FC9840
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 3C0291EA9D433E19705E73F788DA56AF4A7965B3B3C9EAFFF1 87695BC112D5F1
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_hongkong.bin
EMI : CNT : 0007
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: CID : 880103534C4433324755CE285C904867
EMMC: VEN : FORESEE : OEM : 3 : ID : 534C44333247
EMMC: VEN : FORESEE : SLD32G
EMMC: SNN : 3458751632 ( 0xCE285C90) , MF : 4/2021

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x73A000000 [ 28.91 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 97E06591C8361964EDEBB9BF2BE30073

DA : USB : HIGH-SPEED

Boot done!

Patch Level : RP1A.200720.011
Display ID : RP1A.200720.011 release-keys
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-03-05
Build Time : 26.04.2021
Product Info : hongkong
Product Board : hongkong
Board Platform : mt6765
Product Manfct : TCL

MT6765__TCL__11__RP1A.200720.011__hongkong

Unsupport : 0x0000000004600000 : 0x0000000000200000 : cust1

Error : Device NOT supported for SAFE READ!
>>> Send log and report.log (if exists) to support! Include device info also!

Reconnect Power/Cable!

Read info with left shift pressed:

Quote:

Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.27

Load IDBase v718267 Ok!

Update configuration ...
Update Ok!
Load IDBase v718267 Ok!

Operation : Identify [ v2.27 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

Device not found!
>>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v2.27 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM6)
MODE : BOOTROM
PORT : 6
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 498383D341564A12826F3871F9FC9840
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 3C0291EA9D433E19705E73F788DA56AF4A7965B3B3C9EAFFF1 87695BC112D5F1
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_hongkong.bin
EMI : CNT : 0007
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: CID : 880103534C4433324755CE285C904867
EMMC: VEN : FORESEE : OEM : 3 : ID : 534C44333247
EMMC: VEN : FORESEE : SLD32G
EMMC: SNN : 3458751632 ( 0xCE285C90) , MF : 4/2021

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x73A000000 [ 28.91 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 97E06591C8361964EDEBB9BF2BE30073

DA : USB : HIGH-SPEED

Boot done!

Device PMT Info :
PART : 0x0000000000000000 : 0x0000000000400000 : preloader
PART : 0x0000000000000000 : 0x0000000000100000 : pgpt
PART : 0x0000000000100000 : 0x0000000000300000 : proinfo
PART : 0x0000000000400000 : 0x0000000004000000 : nvram
PART : 0x0000000004400000 : 0x0000000000100000 : boot_para
PART : 0x0000000004500000 : 0x0000000000100000 : para
PART : 0x0000000004600000 : 0x0000000000200000 : cust1
PART : 0x0000000004800000 : 0x0000000001000000 : smart
PART : 0x0000000005800000 : 0x0000000000800000 : oempersist
PART : 0x0000000006000000 : 0x0000000001400000 : expdb
PART : 0x0000000007400000 : 0x0000000000100000 : frp
PART : 0x0000000007500000 : 0x0000000002000000 : nvcfg
PART : 0x0000000009500000 : 0x0000000004000000 : nvdata
PART : 0x000000000D500000 : 0x0000000001800000 : md_udc
PART : 0x000000000ED00000 : 0x0000000002000000 : metadata
PART : 0x0000000010D00000 : 0x0000000000800000 : protect1
PART : 0x0000000011500000 : 0x0000000000B00000 : protect2
PART : 0x0000000012000000 : 0x0000000003000000 : persist
PART : 0x0000000015000000 : 0x0000000000800000 : oembin
PART : 0x0000000015800000 : 0x0000000000100000 : seccfg
PART : 0x0000000015900000 : 0x0000000000800000 : simlock
PART : 0x0000000016100000 : 0x0000000000700000 : cust2
PART : 0x0000000016800000 : 0x0000000000200000 : sec1
PART : 0x0000000016A00000 : 0x0000000000080000 : efuse
PART : 0x0000000016A80000 : 0x0000000000100000 : swversion
PART : 0x0000000016B80000 : 0x0000000000C80000 : logo
PART : 0x0000000017800000 : 0x0000000006400000 : md1img_a
PART : 0x000000001DC00000 : 0x0000000000100000 : spmfw_a
PART : 0x000000001DD00000 : 0x0000000000100000 : scp_a
PART : 0x000000001DE00000 : 0x0000000000100000 : sspm_a
PART : 0x000000001DF00000 : 0x0000000001000000 : gz_a
PART : 0x000000001EF00000 : 0x0000000000200000 : lk_a
PART : 0x000000001F100000 : 0x0000000002000000 : boot_a
PART : 0x0000000021100000 : 0x0000000004000000 : vendor_boot_a
PART : 0x0000000025100000 : 0x0000000000800000 : dtbo_a
PART : 0x0000000025900000 : 0x0000000000500000 : tee_a
PART : 0x0000000025E00000 : 0x0000000002000000 : oemcfg_a
PART : 0x0000000027E00000 : 0x0000000000800000 : vbmeta_a
PART : 0x0000000028600000 : 0x0000000000800000 : vbmeta_system_a
PART : 0x0000000028E00000 : 0x0000000000A00000 : vbmeta_vendor_a
PART : 0x0000000029800000 : 0x0000000006400000 : md1img_b
PART : 0x000000002FC00000 : 0x0000000000100000 : spmfw_b
PART : 0x000000002FD00000 : 0x0000000000100000 : scp_b
PART : 0x000000002FE00000 : 0x0000000000100000 : sspm_b
PART : 0x000000002FF00000 : 0x0000000001000000 : gz_b
PART : 0x0000000030F00000 : 0x0000000000200000 : lk_b
PART : 0x0000000031100000 : 0x0000000002000000 : boot_b
PART : 0x0000000033100000 : 0x0000000004000000 : vendor_boot_b
PART : 0x0000000037100000 : 0x0000000000800000 : dtbo_b
PART : 0x0000000037900000 : 0x0000000000500000 : tee_b
PART : 0x0000000037E00000 : 0x0000000002200000 : oemcfg_b
PART : 0x000000003A000000 : 0x00000001C2000000 : super
PART : 0x000000003A100000 : 0x0000000000A00000 : odm_a
PART : 0x000000003AB00000 : 0x000000006E200000 : product_a
PART : 0x00000000A8D00000 : 0x0000000019800000 : vendor_a
PART : 0x00000000C2500000 : 0x0000000097700000 : system_a
PART : 0x0000000159C00000 : 0x0000000010100000 : system_b
PART : 0x0000000169D00000 : 0x000000002C400000 : preload_a
PART : 0x0000000196100000 : 0x0000000065F00000 : oem_a
PART : 0x00000001FC000000 : 0x0000000000800000 : vbmeta_b
PART : 0x00000001FC800000 : 0x0000000000800000 : vbmeta_system_b
PART : 0x00000001FD000000 : 0x0000000000800000 : vbmeta_vendor_b
PART : 0x00000001FD800000 : 0x0000000538CF8000 : userdata
PART : 0x00000007364F8000 : 0x0000000002B00000 : otp
PART : 0x0000000738FF8000 : 0x0000000001000000 : flashinfo
PART : 0x0000000739FF8000 : 0x0000000000008000 : sgpt

Patch Level : RP1A.200720.011
Display ID : RP1A.200720.011 release-keys
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-03-05
Build Time : 26.04.2021
Product Info : hongkong
Product Board : hongkong
Board Platform : mt6765
Product Manfct : TCL

USERDATA : FILESYSTEM : F2FS with FBE ( File-Base Encryption )

NVRAM check : Passed!
NVRAM : SEC NORMAL [ No extra security ]

Backup sensetive data [ 16 ]
Backup path : Backup\MT6765__498383D341564A12826F3871F9FC9840\
[1] Read : PGPT
Backup done!

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : LOCKED!

Done!
Elapsed: 00:00:38

07-28-2021, 15:53	#74 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,593 Member: 1677653 Status: Offline Thanks Meter: 2,769	Tecno with mt6765 cpu line not supported Operation : Read Firmware [ v2.26 ] ExtSparse : Enabled ForceRead : Disabled 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port_V1632 (COM3) MODE : BOOTROM PORT : 3 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Cervino TYPE : MODERN [RAPHAEL] BROM : MEID : 5EF45DEABD291B8DE324089AD88CBD80 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM BROM : SOCID : 0ED27DD51FF71ABE780C644A078BB6CCF579C9BCC7C6021944 B64CF3769CCE8F BROM : SLA : Local Auth BROM : SLA : Auth Started! BROM : SLA : Auth Passed! BROM : SLA : 0x0000001F AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6765 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : INFINITY EMI : SRC : PRELOADER_INFINITY_0 EMI : CNT : 0001 EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x0003A000 [ 232.00 KB ] DRAM: 0xC0000000 [ 3.00 GB ] EMMC: CID : 150100445036384D42026C776854288F EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445036384D42 EMMC: VEN : SAMSUNG : DP68MB EMMC: SNN : 1819764820 ( 0x6C776854) , MF : 2/2021 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x01000000 [ 16.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 58E1EEFCE8A6B7C81E9CC31CB554BA0 DA : USB : HIGH-SPEED Boot done! Product Brand : TECNO Product Device : TECNO-KF6i Product Model : TECNO KF6i Product Name : KF6i-OP Patch Level : RP1A.200720.011 Display ID : KF6i-H6218EFK-R-OP-210528V128 Ver. CodeName : REL Ver. Release : 11 Sec. Patch : 2021-05-05 Build Time : 27.05.2021 Product Info : kf6j_h6218 Product Board : TECNO-KF6i Board Platform : mt6765 Product Manfct : TECNO MOBILE LIMITED MT6765__11__KF6i-H6218EFK-R-OP-210528V128__RP1A.200720.011__kf6j_h6218 Unsupport : 0x0000000014800000 : 0x0000000006400000 : md1img_a Error : Device NOT supported for SAFE READ! >>> Send log and report.log (if exists) to support! Include device info also! Reconnect Power/Cable!

07-26-2021, 06:20	#62 (permalink)
kisekka Major Poster Join Date: Apr 2011 Location: kampala Posts: 44 Member: 1563468 Status: Offline Sonork: featuring Thanks Meter: 9	The same on A10s kg state locked

07-27-2021, 05:38	#65 (permalink)
kisekka Major Poster Join Date: Apr 2011 Location: kampala Posts: 44 Member: 1563468 Status: Offline Sonork: featuring Thanks Meter: 9	How did you do it bcoz it may help me solve samsung A10s mkopa app

07-27-2021, 08:38	#66 (permalink)
rodel_s Insane Poster Join Date: Apr 2017 Location: philippines Posts: 62 Member: 2701949 Status: Offline Thanks Meter: 14	great update i apreciate

07-27-2021, 09:01	#67 (permalink)
geo/mobile Crazy Poster Join Date: Jun 2021 Location: ATTOCK Pakistan Age: 39 Posts: 59 Member: 2990669 Status: Offline Sonork: 100.1660561 Thanks Meter: 61	v g update ,,,,,,,,,,,,thanks

07-27-2021, 14:36	#69 (permalink)
iftikharrana58 No Life Poster Join Date: Nov 2013 Location: pakistan P G L Age: 39 Posts: 1,127 Member: 2067643 Status: Offline Sonork: 1611265 Thanks Meter: 474	infinix hot 9 play frp done Operation : Identify [ v2.27 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM3) MODE : BOOTROM PORT : 3 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Cervino TYPE : MODERN [RAPHAEL] BROM : MEID : B42D5B3A0983201189780116E716B1D7 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM BROM : SOCID : FEE0203A1609A01984F5D6BB0564A1505AA00B0E657C77E81F 5AA432A64A3732 BROM : SLA : Local Auth BROM : SLA : Auth Started! BROM : SLA : Look for EMI BROM : SLA : EMI found! BROM : SLA : Auth Passed! BROM : SLA : 0x0000001F AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6765 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : FireFly EMI : SRC : preloader_x680b_h6215.bin EMI : CNT : 0011 EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x0003A000 [ 232.00 KB ] DRAM: 0xC0000000 [ 3.00 GB ] EMMC: CID : 90014A68433861503E03005248DF6747 EMMC: VEN : HYNIX : OEM : 74 : ID : 68433861503E EMMC: VEN : HYNIX : hC8aP> EMMC: SNN : 5392607 ( 0x005248DF) , MF : 6/2020 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x01000000 [ 16.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 2C9B19EBFEAC3601D87137B01B89DE5C DA : USB : HIGH-SPEED Boot done! Product Brand : Infinix Product Device : Infinix-X680B Product Model : Infinix X680B Product Name : X680B-OP Patch Level : QP1A.190711.020 Display ID : X680B-H6215EFIJ-Q-OP-200629V139 Ver. CodeName : REL Ver. Release : 10 Sec. Patch : 2020-06-05 Build Time : 29.06.2020 Product Info : x680b_h6215 Product Board : Infinix-X680B Board Platform : mt6765 Product Manfct : INFINIX MOBILITY LIMITED USERDATA : FILESYSTEM : F2FS with FBE ( File-Base Encryption ) NVRAM check : Passed! NVRAM : SEC NORMAL [ No extra security ] Backup sensetive data [ 16 ] Backup path : Backup\MT6765__B42D5B3A0983201189780116E716B1D7\ [26] Read : NVRAM [10] Read : NVDATA [3] Read : PROINFO [27] Read : LK [9] Read : NVCFG [12] Read : PROTECT1 [13] Read : PROTECT2 [1] Read : PGPT [11] Read : PERSIST [0] Read : PRELOADER Backup done! STORAGE : Life Status : eMMC : OK! STORAGE : OTP Status : UNLOCKED! PRELOADER : DEVICE : DEV : MT6765 NME : preloader_x680b_h6215.bin CNT : 0011 EMI : [00] : eMMC : LP_DDR4X : ID : 90014A684445615033 : VEN : HYNIX \| DEV : hDEaP3 : RAM : [ 6.00 GB ] EMI : [01] : eMMC : LP_DDR4X : ID : 150100444836444D42 : VEN : SAMSUNG \| DEV : DH6DMB : RAM : [ 4.00 GB ] EMI : [02] : eMMC : LP_DDR4X : ID : 150100444836444142 : VEN : SAMSUNG \| DEV : DH6DAB : RAM : [ 4.00 GB ] EMI : [03] : eMMC : LP_DDR4X : ID : 150100334836434142 : VEN : SAMSUNG \| DEV : 3H6CAB : RAM : [ 6.00 GB ] EMI : [04] : eMMC : LP_DDR4X : ID : 150100335636434D42 : VEN : SAMSUNG \| DEV : 3V6CMB : RAM : [ 6.00 GB ] EMI : [05] : eMMC : LP_DDR4X : ID : 90014A484347386134 : VEN : HYNIX \| DEV : HCG8a4 : RAM : [ 4.00 GB ] EMI : [06] : eMMC : LP_DDR4X : ID : 90014A484347386134 : VEN : HYNIX \| DEV : HCG8a4 : RAM : [ 6.00 GB ] EMI : [07] : eMMC : LP_DDR4X : ID : 90014A68433861503E : VEN : HYNIX \| DEV : hC8aP> : RAM : [ 4.00 GB ] EMI : [08] : eMMC : LP_DDR4X : ID : 90014A68433861503E : VEN : HYNIX \| DEV : hC8aP> : RAM : [ 6.00 GB ] EMI : [09] : eMMC : LP_DDR4X : ID : 90014A684339615033 : VEN : HYNIX \| DEV : hC9aP3 : RAM : [ 4.00 GB ] EMI : [0A] : eMMC : LP_DDR4X : ID : 90014A68433861503E : VEN : HYNIX \| DEV : hC8aP> : RAM : [ 3.00 GB ] EMI : [0B] : eMMC : LP_DDR4X : ID : 150100445036384D42 : VEN : SAMSUNG \| DEV : DP68MB : RAM : [ 3.00 GB ] EMI : [0C] : eMMC : LP_DDR4X : ID : 13014E53304A394B39 : VEN : MICRON \| DEV : S0J9K9 : RAM : [ 4.00 GB ] EMI : [0D] : eMMC : LP_DDR4X : ID : 150100445636444142 : VEN : SAMSUNG \| DEV : DV6DAB : RAM : [ 4.00 GB ] EMI : [0E] : eMMC : LP_DDR4X : ID : 150100445036444142 : VEN : SAMSUNG \| DEV : DP6DAB : RAM : [ 4.00 GB ] EMI : [0F] : eMMC : LP_DDR4X : ID : 150100445636444D42 : VEN : SAMSUNG \| DEV : DV6DMB : RAM : [ 4.00 GB ] EMI : [10] : eMMC : LP_DDR4X : ID : 150100444436384D42 : VEN : SAMSUNG \| DEV : DD68MB : RAM : [ 3.00 GB ] PRELOADER saved to : Backup\PRELOADER\preloader_x680b_h6215.bin Done! Elapsed: 00:01:04 Operation : Reset Settings/Format FS [ v2.27 ] Mode : SMART RESET 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM3) MODE : BOOTROM PORT : 3 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Cervino TYPE : MODERN [RAPHAEL] BROM : MEID : B42D5B3A0983201189780116E716B1D7 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM BROM : SOCID : FEE0203A1609A01984F5D6BB0564A1505AA00B0E657C77E81F 5AA432A64A3732 BROM : SLA : Local Auth BROM : SLA : Auth Started! BROM : SLA : Auth Passed! BROM : SLA : 0x0000001F AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6765 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : FireFly EMI : SRC : preloader_x680b_h6215.bin EMI : CNT : 0011 EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x0003A000 [ 232.00 KB ] DRAM: 0xC0000000 [ 3.00 GB ] EMMC: CID : 90014A68433861503E03005248DF6747 EMMC: VEN : HYNIX : OEM : 74 : ID : 68433861503E EMMC: VEN : HYNIX : hC8aP> EMMC: SNN : 5392607 ( 0x005248DF) , MF : 6/2020 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x01000000 [ 16.00 MB ] USER : 0xE8F800000 [ 58.24 GB ] CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 2C9B19EBFEAC3601D87137B01B89DE5C DA : USB : HIGH-SPEED Boot done! SmartInfo : 0x825657 Format Ok : RESET PROTECTION Format Ok : USERDATA Format Ok : CACHE Format Ok : USERDATA Done! Elapsed: 00:00:37 Reconnect Power/Cable! Operation : Reset Settings/Format FS [ v2.27 ] Mode : FULL FACTORY ( WIPE + FRP ) Info : Operation break by user! Reconnect Power/Cable!

07-27-2021, 17:27	#70 (permalink)
iftikharrana58 No Life Poster Join Date: Nov 2013 Location: pakistan P G L Age: 39 Posts: 1,127 Member: 2067643 Status: Offline Sonork: 1611265 Thanks Meter: 474	vivo y90 smart reset done Operation : Identify [ v2.27 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM3) MODE : BOOTROM PORT : 3 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200 CODE : Merlot TYPE : MODERN [RAPHAEL] BROM : MEID : 81E376CA9CFAFA603984065745C6ADC6 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM BROM : SOCID : 3FA70FB43C65C2310A5D8DAE29E6CA799358FF161E1EC1AF0A EC3A43DF5ABB8E BROM : SLA : Local Auth BROM : SLA : Auth Started! BROM : SLA : Look for EMI BROM : SLA : EMI found! BROM : SLA : Auth Passed! BROM : SLA : 0x0000001F AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6761 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : FireFly EMI : SRC : preloader_k61v1_64_bsp.bin EMI : CNT : 0006 EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x0003A400 [ 233.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] EMMC: CID : 150100514436334D42011A02977486AF EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42 EMMC: VEN : SAMSUNG : QD63MB EMMC: SNN : 436377460 ( 0x1A029774) , MF : 8/2019 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x01000000 [ 16.00 MB ] USER : 0x747C00000 [ 29.12 GB ] CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 8B77455ABBEA7FB62846EF282B3F8C56 DA : USB : HIGH-SPEED Boot done! Patch Level : O11019 Display ID : O11019 release-keys Ver. CodeName : REL Ver. Release : 8.1.0 Sec. Patch : 2020-09-01 Build Time : 13.10.2020 Product Model : vivo 1812 Product Brand : vivo Product Name : PD1917F_EX Product Device : PD1917F_EX Product Manfct : vivo Product Info : k61v1_64_bsp Board Platform : mt6761 USERDATA : FILESYSTEM : EXT4 with FDE ( Full Disk Encryption *) NVRAM check : Passed! NVRAM : SEC NORMAL [ No extra security ] Backup sensetive data [ 16 ] Backup path : Backup\MT6761__81E376CA9CFAFA603984065745C6ADC6\ [29] Read : NVRAM [8] Read : NVDATA [19] Read : PROINFO [30] Read : LK [7] Read : NVCFG [14] Read : PROTECT1 [15] Read : PROTECT2 [1] Read : PGPT [17] Read : PERSIST [0] Read : PRELOADER Backup done! STORAGE : Life Status : eMMC : OK! STORAGE : OTP Status : UNLOCKED! PRELOADER : DEVICE : DEV : MT6761 NME : preloader_k61v1_64_bsp.bin CNT : 0006 EMI : [00] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG \| DEV : GD6BMB : RAM : [ 3.00 GB ] EMI : [01] : eMMC : DDR3 : ID : 150100474536424D42 : VEN : SAMSUNG \| DEV : GE6BMB : RAM : [ 3.00 GB ] EMI : [02] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX \| DEV : hB8aP> : RAM : [ 3.00 GB ] EMI : [03] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX \| DEV : HAG4a2 : RAM : [ 2.00 GB ] EMI : [04] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG \| DEV : QE63MB : RAM : [ 2.00 GB ] EMI : [05] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG \| DEV : QD63MB : RAM : [ 2.00 GB ] PRELOADER saved to : Backup\PRELOADER\preloader_k61v1_64_bsp.bin Done! Elapsed: 00:00:35 Operation : Reset Settings/Format FS [ v2.27 ] Mode : SMART RESET 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM3) MODE : BOOTROM PORT : 3 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200 CODE : Merlot TYPE : MODERN [RAPHAEL] BROM : MEID : 81E376CA9CFAFA603984065745C6ADC6 BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM BROM : SOCID : 3FA70FB43C65C2310A5D8DAE29E6CA799358FF161E1EC1AF0A EC3A43DF5ABB8E BROM : SLA : Local Auth BROM : SLA : Auth Started! BROM : SLA : Auth Passed! BROM : SLA : 0x0000001F AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6761 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : FireFly EMI : SRC : preloader_k61v1_64_bsp.bin EMI : CNT : 0006 EMI : Init EMI from INTERNAL DB EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x0003A400 [ 233.00 KB ] DRAM: 0x80000000 [ 2.00 GB ] EMMC: CID : 150100514436334D42011A02977486AF EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42 EMMC: VEN : SAMSUNG : QD63MB EMMC: SNN : 436377460 ( 0x1A029774) , MF : 8/2019 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x01000000 [ 16.00 MB ] USER : 0x747C00000 [ 29.12 GB ] CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 8B77455ABBEA7FB62846EF282B3F8C56 DA : USB : HIGH-SPEED Boot done! SmartInfo : 0x805757 Format Ok : RESET PROTECTION Format Ok : USERDATA Format Ok : CACHE Format Ok : USERDATA Done! Elapsed: 00:00:38 Reconnect Power/Cable!

07-28-2021, 01:52	#71 (permalink)
Shensohau No Life Poster Join Date: Aug 2010 Location: Inside Logic Age: 37 Posts: 5,882 Member: 1377783 Status: Offline Sonork: 100.1611724 Thanks Meter: 3,336	Hi, possible add KG Locked Remove and MDM for Samsung MTK Models??? thanks

07-28-2021, 12:21	#73 (permalink)
malik zeshan Freak Poster Join Date: Jul 2021 Location: daska Age: 30 Posts: 136 Member: 2992853 Status: Offline Sonork: 100.650600 Thanks Meter: 60	good update team...........................