Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.10 - New year means new features - Page 5 - GSM-Forum

GODISTHEBEST · 01-17-2021, 13:55

are you serious to ask that ?
you can download it and see
also you can see the addiitional function in the first post

GODISTHEBEST · 01-17-2021, 23:34

XIAOMI QIN 1S+
Can not Kick the fdl
i am assuming that this device supported by the Software because he is in the drop list in the software !
so it is settings problem pls advice
First can you pls explain what is it FDL ?

yuranc8 · 01-18-2021, 08:59

Quote:

Originally Posted by Aidootech

Please can I see latest cm2 modules picture....I need to know what new and what new functions added

https://www.infinity-box.com/news/

yuranc8 · 01-18-2021, 09:01

Quote:

Originally Posted by GODISTHEBEST

XIAOMI QIN 1S+
Can not Kick the fdl
i am assuming that this device supported by the Software because he is in the drop list in the software !
so it is settings problem pls advice
First can you pls explain what is it FDL ?

FDLs '' Loaders'' same as MTK DA ''download Agent'' they are LOADERS, if can't send loaders maybe wrong bootkey, or wrong device selected! check all this and post logs

Kwamwon · 01-18-2021, 10:54

please add support itel p36 w6501 flashing. thanks

y8765 · 01-18-2021, 14:03

Quote:

Originally Posted by GODISTHEBEST

XIAOMI QIN 1S+
Can not Kick the fdl
i am assuming that this device supported by the Software because he is in the drop list in the software !
so it is settings problem pls advice
First can you pls explain what is it FDL ?

Thats because you are trying to dump a device that the manufactor (Qin) has changed the fdl signature for them......... *hemilton

iftikhar_246 · 01-18-2021, 14:14

q infuinty c frp done

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:53

Operation : Format FS / Reset Settings [ v2.10 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:46

GODISTHEBEST · 01-18-2021, 20:28

Quote:

Originally Posted by y8765

Thats because you are trying to dump a device that the manufactor (Qin) has changed the fdl signature for them......... *hemilton

ye as i see that you are very "involed " but that yoy i also trying on "NOt hemilton " device and nothing
so wht is that ?

y8765 · 01-18-2021, 20:41

Quote:

Originally Posted by GODISTHEBEST

ye as i see that you are very "involed " but that yoy i also trying on "NOt hemilton " device and nothing
so wht is that ?

No man.
Im a private developer, but I'm familiar with the devices in your region, there are a few developers that made changes on the device partition within the fdl files themself, and that's why read firmware isn't Avilable, add to that the dis-knowledge of the different protocols that you possessing at the moment.

KYEJUSA · 01-19-2021, 15:32

WHY THIS ERROR WHEN TRYING TO UNLOCK NEON RAY PRO
Operation : SP Unlock [ v2.10 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 26221 release-keys
Platform Version: MOCORTM_18A_W20.04.1_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.04.1
HW Version: sc9832e_modem

MODEM TAG : MOCORTM_18A_W20.04.1_Debug_FM_BASE_18A_W20.04.1_sc 9832e_modem_sharkle_Smart_Phone

NVMng : SecurityInfo
IMEI[1] : 352478114011978
IMEI[2] : 867400020316620
WIFIMAC : F86C03197C7F
BT_MAC : F86C03917C7F
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 3C
Status : Locked! Server unlock required!
Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 10, price:5
Process...
Process failed: Please wait

Reconnect Power/Cable!

KYEJUSA · 01-19-2021, 15:34

EVEN TRIED SECOND TIME STILL ERROR;

Operation : SP Unlock [ v2.10 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 26221 release-keys
Platform Version: MOCORTM_18A_W20.04.1_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.04.1
HW Version: sc9832e_modem

MODEM TAG : MOCORTM_18A_W20.04.1_Debug_FM_BASE_18A_W20.04.1_sc 9832e_modem_sharkle_Smart_Phone

NVMng : SecurityInfo
IMEI[1] : 352478114011978
IMEI[2] : 867400020316620
WIFIMAC : F86C03197C7F
BT_MAC : F86C03917C7F
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 3C
Status : Locked! Server unlock required!
Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 5, price:5
Process...
Process failed: Please wait
Disconnected

Reconnect Power/Cable!

KYEJUSA · 01-19-2021, 15:40

And my credit deducted please team check,,ive checked via ios, but i find my credit deducted with those unsuccesfull attempts

YellowBoss · 01-20-2021, 00:33

Quote:

Originally Posted by KYEJUSA

And my credit deducted please team check,,ive checked via ios, but i find my credit deducted with those unsuccesfull attempts

This phone has newest security. Process takes time.

Keep this phone with you and try again to connect it to software in several hours.
If you will see message Process failed: Please wait it means you should wait 2-3 more hours and try again.

mirazulhossain · 01-21-2021, 07:12

Nice update. You work is always remarkable. Wish you a happy new year.

YellowBoss · 01-21-2021, 13:49

Dear Sirs,

SPD phones with newest security comes and these phones can not be unlocked instantly ! Process takes time.
Newest phones gives message Process failed: Please wait

If you will see this message do not return phone to customer !
STEP 1: try with FLASH mode
STEP 2: Keep this phone with you and try to connect it to software in several hours.
If you will see message again it means you should try after 2-3 hours

01-21-2021, 13:49	#75 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,479 Member: 1043909 Status: Offline Thanks Meter: 60,926	Dear Sirs, SPD phones with newest security comes and these phones can not be unlocked instantly ! Process takes time. Newest phones gives message Process failed: Please wait If you will see this message do not return phone to customer ! STEP 1: try with FLASH mode STEP 2: Keep this phone with you and try to connect it to software in several hours. If you will see message again it means you should try after 2-3 hours Last edited by YellowBoss; 01-21-2021 at 18:20.

01-17-2021, 13:55	#61 (permalink)
GODISTHEBEST Freak Poster Join Date: Dec 2015 Age: 46 Posts: 417 Member: 2496790 Status: Offline Thanks Meter: 11	are you serious to ask that ? you can download it and see also you can see the addiitional function in the first post

01-17-2021, 23:34	#62 (permalink)
GODISTHEBEST Freak Poster Join Date: Dec 2015 Age: 46 Posts: 417 Member: 2496790 Status: Offline Thanks Meter: 11	XIAOMI QIN 1S+ Can not Kick the fdl i am assuming that this device supported by the Software because he is in the drop list in the software ! so it is settings problem pls advice First can you pls explain what is it FDL ?

01-18-2021, 10:54	#65 (permalink)
Kwamwon Freak Poster Join Date: Sep 2012 Age: 43 Posts: 136 Member: 1809124 Status: Offline Sonork: Kwam Thanks Meter: 26	please add support itel p36 w6501 flashing. thanks

01-18-2021, 14:14	#67 (permalink)
iftikhar_246 No Life Poster Join Date: Nov 2006 Location: pakistan Age: 39 Posts: 3,224 Member: 384949 Status: Offline Sonork: 1611265 Thanks Meter: 523	q infuinty c frp done 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : Control transfered! Boot Done! - > INFO : Remove cable from device to switch it off! Done! Elapsed: 00:00:53 Operation : Format FS / Reset Settings [ v2.10 ] Mode : Reset FRP BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : Control transfered! Boot Done! Wipe Ok : FRP Reconnect Power/Cable! Done! Elapsed: 00:00:46

01-19-2021, 15:32	#70 (permalink)
KYEJUSA No Life Poster Join Date: Nov 2006 Location: DEATH VALLEY Posts: 1,459 Member: 394869 Status: Offline Sonork: TAKE NO CHANCES Thanks Meter: 500	WHY THIS ERROR WHEN TRYING TO UNLOCK NEON RAY PRO Operation : SP Unlock [ v2.10 ] BootMode : SVC 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! SOC GEN : UniSoc ( E-family and Modern ) BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 26221 release-keys Platform Version: MOCORTM_18A_W20.04.1_Debug Project Version: sharkle_Smart_Phone BASE Version: FM_BASE_18A_W20.04.1 HW Version: sc9832e_modem MODEM TAG : MOCORTM_18A_W20.04.1_Debug_FM_BASE_18A_W20.04.1_sc 9832e_modem_sharkle_Smart_Phone NVMng : SecurityInfo IMEI[1] : 352478114011978 IMEI[2] : 867400020316620 WIFIMAC : F86C03197C7F BT_MAC : F86C03917C7F SEC : SLS:2, SKS:0, SKV:4 SLStatus : 3C Status : Locked! Server unlock required! Connecting to server... Connected Init... Init: Ok Authenticating... Authenticated Checking Client version... Client version Ok Balance: 10, price:5 Process... Process failed: Please wait Reconnect Power/Cable!

01-19-2021, 15:34	#71 (permalink)
KYEJUSA No Life Poster Join Date: Nov 2006 Location: DEATH VALLEY Posts: 1,459 Member: 394869 Status: Offline Sonork: TAKE NO CHANCES Thanks Meter: 500	EVEN TRIED SECOND TIME STILL ERROR; Operation : SP Unlock [ v2.10 ] BootMode : SVC 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! SOC GEN : UniSoc ( E-family and Modern ) BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 26221 release-keys Platform Version: MOCORTM_18A_W20.04.1_Debug Project Version: sharkle_Smart_Phone BASE Version: FM_BASE_18A_W20.04.1 HW Version: sc9832e_modem MODEM TAG : MOCORTM_18A_W20.04.1_Debug_FM_BASE_18A_W20.04.1_sc 9832e_modem_sharkle_Smart_Phone NVMng : SecurityInfo IMEI[1] : 352478114011978 IMEI[2] : 867400020316620 WIFIMAC : F86C03197C7F BT_MAC : F86C03917C7F SEC : SLS:2, SKS:0, SKV:4 SLStatus : 3C Status : Locked! Server unlock required! Connecting to server... Connected Init... Init: Ok Authenticating... Authenticated Checking Client version... Client version Ok Balance: 5, price:5 Process... Process failed: Please wait Disconnected Reconnect Power/Cable!

01-19-2021, 15:40	#72 (permalink)
KYEJUSA No Life Poster Join Date: Nov 2006 Location: DEATH VALLEY Posts: 1,459 Member: 394869 Status: Offline Sonork: TAKE NO CHANCES Thanks Meter: 500	And my credit deducted please team check,,ive checked via ios, but i find my credit deducted with those unsuccesfull attempts

01-21-2021, 07:12	#74 (permalink)
mirazulhossain Freak Poster Join Date: Jul 2010 Location: dhaka,bangladash Posts: 244 Member: 1350723 Status: Offline Sonork: 834599 Thanks Meter: 11	Nice update. You work is always remarkable. Wish you a happy new year.