N95 8g 5pins Done by Infinity!!{New Pinout's}

[UnLoCkit]

N95 8g 5pins Done by Infinity!!

Problem;
No Power

Tool's
Infinity Box
Rj45

Procedure;
1.Connect RX,TX & GND
2.Open Infinity/China Nokia/brand n95/run
3.Go to service tab/Click FFS;Complete Mode/Click Format tab/Power On the phone/Wait until Finish
4.Power on the Phone/Write the imei.click the write tab..

Here the Screen Shot & Logs

Pinout's





Format FFS

COM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:DD63:978C
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.CCD40986.[BLUEFIRE26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_16_MP_V34.BIN_691E4EAF].rpl
====================
New firmware detected: 
BLUEFIRE26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_16_MP_V34.BIN

- make "Read full flash" operation
- send "backup_system_log_..." file to support: [email protected]
- send flash backup file(s) to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: CCD40986
identification#1 protocol ver: 04
ver. sw1: BLUEFIRE26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_16_MP_V34.BIN
ver. sw2: MAUI.06B.W07.16.MP.V34, 50B1E196
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:2AEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading: eeprom[BLUEFIRE26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_16_MP_V34.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[BLUEFIRE26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_16_MP_V34.BIN]_20080816-135038.B0E.bin
flash: 01227E22202200:2AEA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 01227E22202200:2AEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\system_log_CCD40986_BLUEFIRE26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_16_MP_V34.BIN_691E4EAF_20080816-135100.B0X.bin
Finished, time used: 377 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

Write Imei;

Action: imei
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: BLUEFIRE26_06B_HW
Software version: MAUI.06B.W07.16.MP.V
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 135790246811220
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono-CPU
new imei: 350448011234561
imei verified Ok
Finished, time used: 7 sec
Power off phone now !

Done;