n95 chinese supported or no? - GSM-Forum

Pandemonio100 · 12-12-2007, 18:00

Sorry for question but this chinese n95 is supported by Infinity box i can only read information whit V3 usb cable but can't read full flash to try to update language.

Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Software version: B10_EFATRIS_V0929A"
Software date: 2005.04.12
Barcode: 102101MT012345678901234567 10
imei: 3578350100xxxxx
Finished, time used: 4 sec
Power off phone now !

i receive always this error when try to read full flash.

COM6 [USBSER000] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
9600
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !

InfinityHelp · 12-12-2007, 20:51

hello!

you must build special cable for flashing operations.

Pandemonio100 · 12-13-2007, 10:55

ok i had thought that cable is not good but this phone have connector as V3 so i can build one cable and try to read flash but scheme?

**InfinitySupport** · 12-13-2007, 11:35

You have not so many pins to try as Rx/Tx.
Just find Gnd and +V, try rest pins as Rx/Tx.

hagard · 12-13-2007, 11:44

use this pinout mate..

Pandemonio100 · 12-13-2007, 11:54

Ok very good i try to read in this way however i need translate after read flash in italian right or exist language to change directly?

/ARIF/ · 12-13-2007, 12:15

n95 100% supported by infinity.....................

Pandemonio100 · 12-13-2007, 23:51

Quote:

Originally Posted by hagard

use this pinout mate..

Sorry but this is a COM cable not USB right?

InfinityHelp · 12-14-2007, 02:11

hello Pandemonio100!

yes, this is com port cable.
from box rj45 to phone

Pandemonio100 · 12-14-2007, 11:25

Ok sorry for all this question but i need understand now i have this box what's pinout for built cable?

Tanks

12-12-2007, 18:00	#1 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	n95 chinese supported or no? Sorry for question but this chinese n95 is supported by Infinity box i can only read information whit V3 usb cable but can't read full flash to try to update language. Action: read information Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... Hardware version: MT6226, E02 Software version: B10_EFATRIS_V0929A" Software date: 2005.04.12 Barcode: 102101MT012345678901234567 10 imei: 3578350100xxxxx Finished, time used: 4 sec Power off phone now ! i receive always this error when try to read full flash. COM6 [USBSER000] selected Device: Autodetect 6205-6227 NOR Checking data, wait... advanced flash detection active Action: read NOR flash Boot... Press and HOLD Power button now ! baud autodetection active 9600 Connecting, wait... error: boot phase#1 failed Release Power button now ! in case of initial connection problem: on/off "Boot baudrate autoselect" box. Boot Fail Finished, time used: 3 sec Remove/Install battery now !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ask to rpl free ??? my pkey supported or no	Chawkiz_gsm	J.A.F. By Jafsupport.com	14	07-11-2009 20:01
unlock n95 8g yes or no	buqki	MT-BOX	3	02-06-2008 21:40
RASKAL:N95-2 RM320 unlock supported or no!!!	GSMBOURGES	BB5BOX	16	01-18-2008 23:05
did 6131 unlock support or no	ali25	Nokia Base Band 5 ( BB-5 )	2	05-16-2007 15:54
a38 supported or no supported	OTMAN-GSM	PolarBox 3	3	01-27-2007 14:57

12-12-2007, 20:51	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! you must build special cable for flashing operations.

12-13-2007, 10:55	#3 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	ok i had thought that cable is not good but this phone have connector as V3 so i can build one cable and try to read flash but scheme?

12-13-2007, 11:35	#4 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	You have not so many pins to try as Rx/Tx. Just find Gnd and +V, try rest pins as Rx/Tx.

12-13-2007, 11:44	#5 (permalink)
hagard Freak Poster Join Date: Jul 2005 Location: Philippines Posts: 203 Member: 161547 Status: Offline Thanks Meter: 241	use this pinout mate..

12-13-2007, 11:54	#6 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	Ok very good i try to read in this way however i need translate after read flash in italian right or exist language to change directly?

12-13-2007, 12:15	#7 (permalink)
/ARIF/ Temporary banned !! Join Date: Jul 2007 Location: Toketek Age: 44 Posts: 780 Member: 546766 Status: Offline Thanks Meter: 51	n95 100% supported by infinity.....................

12-14-2007, 02:11	#9 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello Pandemonio100! yes, this is com port cable. from box rj45 to phone