ot-217dx - GSM-Forum

newman201 · 05-21-2012, 02:07

You can see for read the firmware for OT-217DX
I am try all the possibilite but i am can read the firmware you have the idea or not
the phone with two sim with two imei

InfinityHelp · 05-21-2012, 07:34

hello!

if you can not connect with this phone- then obviously you have not used correct pinout.
Best way to check if you are using correct pins is to attach battery and power On phone. Measure voltage on those pins and make sure that there is present voltage between 3,7-3,9 volts.

newman201 · 05-21-2012, 10:06

thre test for volt you can add help me please

newman201 · 05-21-2012, 10:35

the mesure with the phone on with led

newman201 · 06-02-2012, 10:16

You can help me the ship he is mediatek arm mt6251v for this model

InfinityHelp · 06-02-2012, 16:13

hello!

measurements must be done only on powered On phone.
other measurements are not useful.
As we can see, one of points is second row, pin number 3.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OT POCKET	zelda	Alcatel & TCL Old Models	2	03-28-2001 18:54
OT EASY .. HE1 efr v.251	makona	Alcatel & TCL Old Models	2	04-06-2000 22:26
Need flash for OT view BE3	terano	Alcatel & TCL Old Models	0	03-02-2000 22:08
Please help me to unlock OT Max HE1 301	George Stawerton	Alcatel & TCL Old Models	0	02-23-2000 23:29
OT MAX solution	George Stawerton	Alcatel & TCL Old Models	0	01-05-2000 00:14

05-21-2012, 07:34	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! if you can not connect with this phone- then obviously you have not used correct pinout. Best way to check if you are using correct pins is to attach battery and power On phone. Measure voltage on those pins and make sure that there is present voltage between 3,7-3,9 volts.

06-02-2012, 10:16	#5 (permalink)
newman201 Freak Poster Join Date: Mar 2006 Posts: 105 Member: 239508 Status: Offline Thanks Meter: 6	You can help me the ship he is mediatek arm mt6251v for this model

06-02-2012, 16:13	#6 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! measurements must be done only on powered On phone. other measurements are not useful. As we can see, one of points is second row, pin number 3.