|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
| LinkBack | Thread Tools | Display Modes |
09-07-2007, 13:01 | #1 (permalink) |
Banned Join Date: Dec 2006 Location: india
Posts: 107
Member: 406409 Status: Offline Thanks Meter: 10 | PLEASE HELP TO UNLOCK CHINENSS MOBILE MPe4 T268 Action: read information Model: unknown device Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... Hardware version: Release channel 0 okTTTTTTcheck GCTTTTTTTTcheck GCTTTTTTTTcheck GCTTTTTTTTcheck GCGet channel 0 okAT+COPS?TAT+COPS?+CME ERROR: 15AT+CCLK?AT+CCLK?+CCLK: "04/01/02,17:47:46+00" Hardware version: AT+CSQAT+CSQ+CME ERROR: 15AT+CBCAT+CBC+CBC: 3533,29 Software version: SNDsound status1=0close mu****ter _AKSD_PlayFromFile, FileLen: 825, Repeat: 1Enter _AKSD_PlayFromBuffer, size: 825, type: 1, Repeat: 1trackNum = 7Skipp 16 bytes for Sysx!!!!!!CurrTempo is 5open mutesound volume is 16384AT+CMER?Call Suspend Func AT+CMER?+CME ERROR: 15Release channel 0 okTTCall resume Func TTTTTcheck GCTTclose mu****d of playTTTTTTcheck GCTTTTTTTTcheck GCTGPIO interrupt.Start timer (*pEventParm)->s.Param1Param2=========(124)(208)SM_GetCurrentSM( ) == (407)GPIO interrupt.enter VME_SoundStop()Stop timer TGPIO interrupt.Start timer (*pEventParm)->s.Param1Param2=========(17)(251)SM_GetCurrentSM () == (407)TGPIO interrupt.Stop timer GPIO interrupt.Start timer T(*pEventParm)->s.Param1Param2=========(123)(208)SM_GetCurrentSM( ) == (407)GPIO interrupt.GPIO interrupt.(*pEventParm)->s.Param1Param2=========(120)(209)SM_GetCurrentSM( ) == (407)GPIO interrupt.close da and dspTStop timer GPIO interrupt.Start timer (*pEventParm)->s.Param1Param2=========(35)(306)SM_GetCurrentSM () == (407)GPIO interrupt.TThe RAM address is 820878088Stop timer TTcheck GCGet channel 0 okAT+COPS?TAT+COPS?+CME ERROR: 15AT+CCLK?AT+CCLK?+CCLK: "04/01/02,17:48:18+00" Software date: AT+CSQAT+CSQ+CME ERROR: 15AT+CBCAT+CBC+CBC: 3513,24 Barcode: AT+CMER?AT+CMER?+CME ERROR: 15Release channel 0 okTTTTTTTcheck GCTTTTTTTTcheck GCTTGPIO interrupt.Start timer (*pEventParm)->s.Param1Param2=========(123)(210)SM_GetCurrentSM( ) == (407)GPIO interrupt.TStop timer GPIO interrupt.Start timer (*pEventParm)->s.Param1Param2=========(16)(247)SM_GetCurrentSM () == (407)TGPIO interrupt.Stop timer GPIO interrupt.Start timer (*pEventParm)->s.Param1Param2=========(122)(211)SM_GetCurrentSM( ) == (407)TGPIO interrupt.Stop timer GPIO interrupt.Start timer (*pEventParm)->s.Param1Param2=========(50)(201)SM_GetCurrentSM () == (407)GPIO interrupt.TStop timer GPIO interrupt.Start timer (*pEventParm)->s.Param1Param2=========(34)(311)SM_GetCurrentSM () == (407)GPIO interrupt.TThe RAM address is 820878088Stop timer Tcheck GCTTTTTTTTcheck GCGet channel 0 okAT+COPS?TAT+COPS?+CME ERROR: 15AT+CCLK?AT+CCLK?+CCLK: "04/01/02,17:48:50+00 Finished, time used: 119 sec Power off phone now ! |
09-07-2007, 14:07 | #2 (permalink) |
Banned Join Date: Dec 2006 Location: india
Posts: 107
Member: 406409 Status: Offline Thanks Meter: 10 | Action: read information Model: unknown device Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... Hardware version: pos=1**power key upreason=1SYS_STATE_FLAG:1lcd id is 0x0lcd id is 0x00001505match lcdkeypad_value=949672950--PhyAddr = 5, LogAddr = 6, PhyTimes =527, LogTimes = 46061--PhyAddr = 723, LogAddr = 6, PhyTimes =527, LogTimes = 46072--PhyAddr = 764, LogAddr = 7, PhyTimes =527, LogTimes = 31743--PhyAddr = 766, LogAddr = 760, PhyTimes =527, LogTimes = 6474--PhyAddr = 768, LogAddr = 760, PhyTimes =527, LogTimes = 6485--PhyAddr = 777, LogAddr = 2, PhyTimes =527, LogTimes = 45086--PhyAddr = 778, LogAddr = 2, PhyTimes =526, LogTimes = 45037--PhyAddr = 759, LogAddr = 6, PhyTimes =527, LogTimes = 46118--PhyAddr = 758, LogAddr = 2, PhyTimes =527, LogTimes = 45099--PhyAddr = 6, LogAddr = 7, PhyTimes =487, LogTimes = 317710--PhyAddr = 1013, LogAddr = 2, PhyTimes =526, LogTimes = 450411--PhyAddr = 1014, LogAddr = 760, PhyTimes =526, LogTimes = 64512--PhyAddr = 1017, LogAddr = 6, PhyTimes =526, LogTimes = 459313--PhyAddr = 1018, LogAddr = 7, PhyTimes =527, LogTimes = 317314--PhyAddr = 1019, LogAddr = 2, PhyTimes =526, LogTimes = 450515--PhyAddr = 1020, LogAddr = 762, PhyTimes =526, LogTimes = 1044Mounting OK!file lens is 230456Trans24BitBMP-------display bios pictureset backLight level-------------(3)(12)Loading MMI...file lens is 5202168Loading Resource...file lens is 5404480 Hardware version: Ready to start...Run MMI...Fwl_InitMMU2cOP@DT Software version: TRelease channel 2 okGet channel 0 okAT+CMEE=1AT+CMEE=1 Software date: AT+XCDU=1,1,1,1,1AT+XCDU=1,1,1,1,1 Barcode: IAA%I5moݵo/VWRkչ՝•‘5)•…•́)5•…•́ )5EQ mode is 0 the normal state |
09-08-2007, 09:05 | #4 (permalink) |
Banned Join Date: Dec 2006 Location: india
Posts: 107
Member: 406409 Status: Offline Thanks Meter: 10 | can you tell me which moel i slect for unlock form nfinty box thanks Action: imei Model: unknown device Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... Hardware version: pos=1**power key upreason=1SYS_STATE_FLAG:1lcd id is 0x0lcd id is 0x00001505match lcdkeypad_value=949672950--PhyAddr = 5, LogAddr = 6, PhyTimes =527, LogTimes = 46061--PhyAddr = 723, LogAddr = 6, PhyTimes =527, LogTimes = 46072--PhyAddr = 758, LogAddr = 2, PhyTimes =527, LogTimes = 45093--PhyAddr = 759, LogAddr = 6, PhyTimes =527, LogTimes = 46114--PhyAddr = 766, LogAddr = 760, PhyTimes =527, LogTimes = 6475--PhyAddr = 777, LogAddr = 2, PhyTimes =527, LogTimes = 45086--PhyAddr = 764, LogAddr = 7, PhyTimes =527, LogTimes = 31747--PhyAddr = 784, LogAddr = 6, PhyTimes =527, LogTimes = 46128--PhyAddr = 778, LogAddr = 7, PhyTimes =527, LogTimes = 31799--PhyAddr = 1011, LogAddr = 7, PhyTimes =527, LogTimes = 317810--PhyAddr = 768, LogAddr = 760, PhyTimes =527, LogTimes = 64811--PhyAddr = 1014, LogAddr = 760, PhyTimes =526, LogTimes = 64512--PhyAddr = 1017, LogAddr = 6, PhyTimes =526, LogTimes = 459313--PhyAddr = 1018, LogAddr = 7, PhyTimes =527, LogTimes = 317314--PhyAddr = 1019, LogAddr = 2, PhyTimes =526, LogTimes = 450515--PhyAddr = 1020, LogAddr = 762, PhyTimes =526, LogTimes = 1044Mounting OK!file lens is 230456Trans24BitBMP-------display bios pictureset backLight level-------------(3)(12)Loading MMI...file lens is 5202168Loading Resource...file lens is 5404480 Hardware version: Ready to start...Run MMI...Fwl_InitMMU2complete console_initcomplete gpio_initlcd id is 0x40lcd id is 0x1505match lcdcomplete gpio_set_pin_dir, gpio_set_pin_levelSYS_STATE_FLAG:1***switch on by power key***close cameraenter BOOT mode, clock=0x2efc8, freq=84000000Enter CMain functionCall Fwl_MallocInitVCom_Initopen vatc okVME_v24Opennormal mainenter normal_main()Fwl_InitTimerPublicTimerStart, gb_public_timer_id:0fs initinit sd cardinit fat fs0--PhyAddr = 5, LogAddr = 6, PhyTimes =527, LogTimes = 46061--PhyAddr = 723, LogAddr = 6, PhyTimes =527, LogTimes = 46072--PhyAddr = 758, LogAddr = 2, PhyTimes =527, LogTimes = 45093--PhyAddr = 759, LogAddr = 6, PhyTimes =527, LogTimes = 46114--PhyAddr = 766, LogAddr = 760, PhyTimes =527, LogTimes = 6475--PhyAddr = 777, LogAddr = 2, PhyTimes =527, LogTimes = 45086--PhyAddr = 764, LogAddr = 7, PhyTimes =527, LogTimes = 31747--PhyAddr = 784, LogAddr = 6, PhyTimes =527, LogTimes = 46128--PhyAddr = 778, LogAddr = 7, PhyTimes =527, LogTimes = 31799--PhyAddr = 1011, LogAddr = 7, PhyTimes =527, LogTimes = 317810--PhyAddr = 768, LogAddr = 760, PhyTimes =527, LogTimes = 64811--PhyAddr = 1014, LogAddr = 760, PhyTimes =526, LogTimes = 64512--PhyAddr = 1017, LogAddr = 6, PhyTimes =526, LogTimes = 459313--PhyAddr = 1018, LogAddr = 7, PhyTimes =527, LogTimes = 317314--PhyAddr = 1019, LogAddr = 2, PhyTimes =526, LogTimes = 450515--PhyAddr = 1020, LogAddr = 762, PhyTimes =526, LogTimes = 10440--PhyAddr = 5, LogAddr = 144, PhyTimes =140, LogTimes = 15741--PhyAddr = 48, LogAddr = 144, PhyTimes =140, LogTimes = 15702--PhyAddr = 7, LogAddr = 144, PhyTimes =140, LogTimes = 15763--PhyAddr = 71, LogAddr = 3, PhyTimes =140, LogTimes = 3514--PhyAddr = 68, LogAddr = 69, PhyTimes =140, LogTimes = 1055--PhyAddr = 69, LogAddr = 144, PhyTimes =58, LogTimes = 15776--PhyAddr = 604, LogAddr = 0, PhyTimes =139, LogTimes = 2877--PhyAddr = 608, LogAddr = 3, PhyTimes =139, LogTimes = 3448--PhyAddr = 616, LogAddr = 69, PhyTimes =139, LogTimes = 1029--PhyAddr = 143, LogAddr = 3, PhyTimes =140, LogTimes = 35410--PhyAddr = 644, LogAddr = 3, PhyTimes =139, LogTimes = 34711--PhyAddr = 658, LogAddr = 3, PhyTimes =139, LogTimes = 34812--PhyAddr = 876, LogAddr = 144, PhyTimes =139, LogTimes = 156813--PhyAddr = 70, LogAddr = 0, PhyTimes =140, LogTimes = 29314--PhyAddr = 887, LogAddr = 0, PhyTimes =140, LogTimes = 29015--PhyAddr = 894, LogAddr = 144, PhyTimes =139, LogTimes = 1555success to mount nandflashSD SETUP POWER OK!SD SETUP CLOCK OK! The cmd send ok. The cmd55 command response is time outGet the OCR failed ! Get the card OCR failed !sd card initial error!!!gb_CityCountsgb_worldTimeZoneNumbIconBarIn it initEnter _AKSD_InitEQ mode is 0 VME_SoundOpen(), Device Verison=616Fwl_SoundOpen**********Read on/off mp4 config file [A:/ONOFF_MP4_GS]!********************default on mp4 file:[a:/mp4/open.avi]****************default off mp4 file:[K:/mobile/audio/appke kashish.3gp]******ReadUserdataset backLight level-------------(7)(28)MMS_InitFlashMMSInitTime_InitErrorReportIni tSMSsQueueInitSMSsQueueInitCBSStackInitQueueInit(& gb_sms.smssim)QueueInit(&gb.ussddata);CreateMenuTr eeSTK_InitMainMenuInit_CityTi*******nit_transFwl_R andSeedm_initStateHandler calledminAlignBuf:0x3072b850, sizeof(M_EVENTENTRY):0xctrace m_eventQueue:0x3072b8500x20090064=0x7e01ffffafter keypad init***ignite module start*****ignite module end****Call m_mainloop-------------------- SYSTER START EVENT ---------------Call Fwl_Tscr_HW_initstrTSConfigDefTab:freq = 1, penDownWait = 1, penUpWait = 3, fontEndWait = 50.TS_THRESHOLD_REG 11111 = 3ffADC_CONTROL1 = 7900019ADC_CONTROL1 = 47900019ADC_CONTROL2 = 15ffffANLSOFT_CONTROL = 24TGet channel 2 okAT+XIER=0AT+XIER=0+XIER: normal power on Software version: TRelease channel 2 okGet channel 0 okAT+CMEE=1AT+CMEE=1 Software date: AT+XCDU=1,1,1,1,1AT+XCDU=1,1,1,1,1 Barcode: AT+XIER=1AT+XIER=1+XIER: Headset is unpluggedearphone is outearphone is outEQ mode is 0 the normal state new imei: 350448011234561 imei verification failed Finished, time used: 26 sec Power off phone now ! |
Bookmarks |
| |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
need help to unlock b-mobile u526 | overdrive O.D. | Various | 4 | 11-20-2009 19:20 |
Please Help To Unlock Chinenss Mobile Mpe4 mda T268 | NITIN 10 | Infinity-Box | 4 | 09-07-2007 18:32 |
Please help to unlock I-Mobile 308 | Vansy | Infinity-Box | 1 | 04-09-2007 05:49 |
help to unlock bird mobile | kotiasanjay | Nokia Digital Core Technology 4 ( DCT-4 ) | 0 | 02-03-2007 08:56 |
Please Help to unlock SDA II SIMLock T-mobile.at | manjas | HTC & PDA WM( With Touchscreen) | 5 | 02-28-2006 20:19 |
|