Samsung A10s after repair boot,lost imei

[halfa40gsm]

Hi Team
So after I dead boot with Odin A10s
I repair it with CM2MT2 2.28 but the IMEI of device is lost and I try to repair it I can't
So; team can help me what I can do to repair IMEI
This is info of device

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
     BROM : Reset Interface!
PTFN : MediaTek USB Port_V1633 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 29A995D47E75F65FD2E465A0E0EE4C16
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 5570D882E39001C1672B9260C7B05313D61A36975C24155A1495EE87EA27FEED
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_s96116ca1.bin
     EMI : CNT : 0008
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 150100514436334D4203DF4F96C7B699
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42
        EMMC: VEN : SAMSUNG : QD63MB
        EMMC: SNN : 3746535111 ( 0xDF4F96C7) , MF : 11/2019

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 5D4FCBC435BB7A10211938877D944F24

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : samsung
Product Model  : SM-A107F
Product Name   : a10sxx
Product Device : a10s
Patch Level    : QP1A.190711.020
Display ID     : QP1A.190711.020.A107FXXU8BUF1
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-04-01
Build Time     : 14.06.2021
Product Info   : a10s
Product Board  : S96116CA1
Board Platform : mt6765
Product Manfct : samsung



NVRAM : TITAN_S1_Q0MP1_K62V1_64_BSP_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_TC10_PR1_SP_V4_P20
NVRAM : 0xBC0AD96C
NVRAM : State : Ok!
NVRAM : SecLv : Vendor Signed
INFO  : WiFi MAC : 942DDC08329C
INFO  : BlTh MAC : 942DDC08329D
INFO  : IMEI[1] : 9AFD3EA5415F462
INFO  : IMEI[2] : AEB47F639398439


Backup sensetive data [ 16 ]
Backup path : Backup\MT6765__29A995D47E75F65FD2E465A0E0EE4C16\
Backup done!


STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : NOT Enabled!

Done!
Elapsed: 00:00:26

Thank you for your attention "Best and Great Team"

[kamal_singla]

please send flashing logs

[halfa40gsm]

Operation : Identify [ v2.28 ]

Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM8)
MODE : PRELOADER PORT
PORT : 8
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : Reset Interface!
PTFN : MediaTek USB Port_V1632 (COM17)
MODE : BOOTROM
PORT : 17
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 29A995D47E75F65FD2E465A0E0EE4C16
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 5570D882E39001C1672B9260C7B05313D61A36975C24155A14 95EE87EA27FEED
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_s96116ra1.bin
EMI : CNT : 0008
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: CID : 150100514436334D4203DF4F96C7B699
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42
EMMC: VEN : SAMSUNG : QD63MB
EMMC: SNN : 3746535111 ( 0xDF4F96C7) , MF : 11/2019

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 5D4FCBC435BB7A10211938877D944F24

DA : USB : HIGH-SPEED

Boot done!

Product Brand : samsung
Product Model : SM-A107F
Product Name : a10sxx
Product Device : a10s
Patch Level : QP1A.190711.020
Display ID : QP1A.190711.020.A107FXXU8BUF1
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-04-01
Build Time : 14.06.2021
Product Info : a10s
Product Board : S96116CA1
Board Platform : mt6765
Product Manfct : samsung



NVRAM : TITAN_S1_Q0MP1_K62V1_64_BSP_MDBIN_PCB01_MT6765_S00 .MOLY_LR12A_R3_TC10_PR1_SP_V4_P20
NVRAM : 0xBC0AD96C
NVRAM : State : Ok!
NVRAM : SecLv : Vendor Signed
INFO : WiFi MAC : 942DDC08329C
INFO : BlTh MAC : 942DDC08329D
INFO : IMEI[1] : 353420119327537
INFO : IMEI[2] : 353421119327535


Backup sensetive data [ 16 ]
Backup path : Backup\MT6765__29A995D47E75F65FD2E465A0E0EE4C16\
Backup done!


STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : NOT Enabled!

Done!
Elapsed: 00:00:30

[halfa40gsm]

[halfa40gsm]

Best and Great Team thank's advanced

[kamal_singla]

Flashing logs please

[med_abid_2006]

This method is for XIAOMI phone but maybe it will be help you

https://forum.gsmhosting.com/vbb/f29...phone-2988416/
i'm ask allah almighty to you best chance

[zzaheerr]

dear next time dont full flash samsung mtk cpu for dead boot
just preloder recovery boot system img only flash img unselect all wnwanted

after flash phone alive and show download mode then flash with odin best for
samsung mtk phones thanks

[halfa40gsm]

Originally Posted by kamal_singla

Flashing logs please

sorry my brother flashing logs

Created by Infinity-Box (c) 2021
Chinese Miracle II : MediaTek Service Module
Device Info file : _Android_info.txt

Product Brand : samsung
Product Model : SM-A107F
Product Name : a10sxx
Product Device : a10s
Patch Level : QP1A.190711.020
Display ID : QP1A.190711.020.A107FXXU8BUF1
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-04-01
Build Time : 14.06.2021
Product Info : a10s
Product Board : S96116CA1
Board Platform : mt6765
Product Manfct : samsung

Preloader [HW DEV] Info :
EMI : DEV : MT6765
EMI : SRC : preloader_s96116ca1.bin
EMI : CNT : 0008
EMI : [00] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG | DEV : QD63MB : RAM : [ 2.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 700100464D42434541 : VEN : KINGSTON | DEV : FMBCEA : RAM : [ 2.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 150100515836334D42 : VEN : SAMSUNG | DEV : QX63MB : RAM : [ 2.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 150100515836334142 : VEN : SAMSUNG | DEV : QX63AB : RAM : [ 2.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100475836424142 : VEN : SAMSUNG | DEV : GX6BAB : RAM : [ 3.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 2.00 GB ]

Operation : Write Flash [ v2.28 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :20
[FL] : Set : preloader_s96116ca1.bin
[FL] : Set : efuse.img
[FL] : Set : param.img
[FL] : Set : up_param.img
[FL] : Set : md1rom.img
[FL] : Set : spmfw.img
[FL] : Set : tinysys-scp.bin
[FL] : Set : sspm.img
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : recovery.img
[FL] : Set : dtbo.img
[FL] : Set : tz.img
[FL] : Set : vendor.img
[FL] : Set : product.img
[FL] : Set : system.img
[FL] : Set : vbmeta.img
[FL] : Set : cache.img
[FL] : Set : omr.img
[FL] : Set : userdata.img

[FL] : Total size : 0xF16384D4 [ 3.77 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : Reset Interface!
PTFN : MediaTek USB Port_V1633 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 29A995D47E75F65FD2E465A0E0EE4C16
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 5570D882E39001C1672B9260C7B05313D61A36975C24155A14 95EE87EA27FEED
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6765
EMI : SRC : preloader_s96116ca1.bin
EMI : CNT : 0008
EMI : [00] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG | DEV : QD63MB : RAM : [ 2.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 700100464D42434541 : VEN : KINGSTON | DEV : FMBCEA : RAM : [ 2.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 150100515836334D42 : VEN : SAMSUNG | DEV : QX63MB : RAM : [ 2.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 150100515836334142 : VEN : SAMSUNG | DEV : QX63AB : RAM : [ 2.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100475836424142 : VEN : SAMSUNG | DEV : GX6BAB : RAM : [ 3.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 2.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: CID : 150100514436334D4203DF4F96C7B699
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 514436334D42
EMMC: VEN : SAMSUNG : QD63MB
EMMC: SNN : 3746535111 ( 0xDF4F96C7) , MF : 11/2019

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 5D4FCBC435BB7A10211938877D944F24

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000000600000
Erase : 0x0000000006B00000 : 0x0000000001D00000
Erase : 0x000000000A800000 : 0x0000000006000000
Erase : 0x0000000011800000 : 0x0000000000800000
Erase : 0x0000000015080000 : 0x0000000000980000
Erase : 0x0000000015D00000 : 0x0000000006900000
Erase : 0x000000001CA00000 : 0x00000001F3600000

[FL] : RePartition
[FL] : RePartition Ok!


[FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : EFUSE
Write : PARAM
FAIL : SEC : IMG TYPE MISMATCH
Write : UP_PARAM
FAIL : SEC : IMG TYPE MISMATCH
Write : MD1IMG
FAIL : SEC : IMG TYPE MISMATCH
Write : SPMFW
Write : SCP1
Write : SSPM_1
Write : LK
Write : BOOT
Write : RECOVERY
Write : DTBO
Write : TEE1
Write : VENDOR
Write : PRODUCT
FAIL : SEC : IMG TOO LARGE
Write : SYSTEM
Write : VBMETA
Write : CACHE
Write : OMR
FAIL : SEC : IMG TYPE MISMATCH
Write : USERDATA

Ultra : OK! [ All failed parts successfully flashed ]

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:02:50

Reconnect Power/Cable!

[JayDi]

Originally Posted by zzaheerr

dear next time dont full flash samsung mtk cpu for dead boot
just preloder recovery boot system img only flash img unselect all wnwanted

after flash phone alive and show download mode then flash with odin best for
samsung mtk phones thanks

We made all to fully read and flash SAMSUNG phones in MTK mode without ODIN or further service need.

Also it NOT touch any security data, if it alive, for sure.

[malka4u]

Originally Posted by JayDi

We made all to fully read and flash SAMSUNG phones in MTK mode without ODIN or further service need.

Also it NOT touch any security data, if it alive, for sure.

m013f still not supported

Operation : Read Firmware [ v2.28 ]

ExtSparse   : Enabled
ForceRead   : Enabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM76)
MODE : BOOTROM
PORT : 76
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Zion
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 908926C08381C6276BD41DBC36A2F16A
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 8B4F46B3993E210750EB6DF4CEC396E2A3298D0BD98D26AB26B3354DB230D937
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : PRELOADER_INFINITY_0
     EMI : CNT : 0002
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        EMMC: CID : 150100464536324D4200BBB8BC48B729
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 464536324D42
        EMMC: VEN : SAMSUNG : FE62MB
        EMMC: SNN : 3149446216 ( 0xBBB8BC48) , MF : 11/2020

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x3AB400000 [ 14.68 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : E9889539ED84CF367A6284DDD2ABBB30

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : samsung
Product Model  : SM-M013F
Product Name   : a01coredd
Product Device : a01core
Patch Level    : QP1A.190711.020
Display ID     : QP1A.190711.020.M013FDDU3AUD2
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-04-01
Build Time     : 15.04.2021
Product Info   : a01core
Product Board  : k39tv1_bsp_1g_titan
Board Platform : mt6739
Product Manfct : samsung

MT6739__samsung__SM-M013F__10__QP1A.190711.020.M013FDDU3AUD2__QP1A.190711.020__a01core


Error : Device NOT supported for SAFE READ!
>>> Send log and report.log (if exists) to support! Include device info also!

Reconnect Power/Cable!

[halfa40gsm]

Originally Posted by JayDi

We made all to fully read and flash SAMSUNG phones in MTK mode without ODIN or further service need.

Also it NOT touch any security data, if it alive, for sure.

Sir JayDi , is there a solution to this phone?