Samsung P528 network 1 and 2 - GSM-Forum

JAVA Good · 01-30-2010, 17:07

hello all,

I'am new in chines phone, I have one Samsung P528 with 2 sim card, one network don't work, but 2 other network of the country work ?

if I change the IMEI can this help me or no pls, because on phone :

- the IMEI start with : 13579024xxxxx
- back of battery have IMEI : 3505280800xxxxx

maybe this phone have 2 imei like phone with 2 simcard.

and anny one can help me with pintout pls, I have pinfinder but don't find the pinout,

Best Regards,
JAVA Good.

JAVA Good · 01-30-2010, 19:45

hello all,

I use my tester and find ( normaly ) Tx and Rx, but can't read information of phone, anny one have idea pls,

I put 2 sim card, and on one network when I go for calibrate the network the phone show and error with MTK message ?

Best Regards,
JAVA Good.

JAVA Good · 01-30-2010, 19:46

there is the picture

InfinityHelp · 01-30-2010, 20:35

hello!

first of all: what MCU it is based on?
and the second Tx/Rx pins must have 2,8 volts, not 3,8

JAVA Good · 01-30-2010, 21:50

tks for the inforlmation about 2.8, because I forget and search the picture on my file but don't find it, with information for find Tx and Rx,

and about MCU I think is a 6225 like on this message, but not sure, I see again the phone tomorow and post result, and big tks for your reply and help

with RJ45 cable with + and - of pinfinder I can't power on the phone, this is normal ?

Best Regards,
JAVA Good.

InfinityHelp · 01-31-2010, 08:56

Quote:

Originally Posted by JAVA Good

tks for the inforlmation about 2.8, because I forget and search the picture on my file but don't find it, with information for find Tx and Rx,

and about MCU I think is a 6225 like on this message, but not sure, I see again the phone tomorow and post result, and big tks for your reply and help

with RJ45 cable with + and - of pinfinder I can't power on the phone, this is normal ?

Best Regards,
JAVA Good.

hello!

if you cant power it On using pinfinder power- pinout search is useless.
try to find why this is happening. Did you modify your main infinity box by removing and shortcutting diode? this procedure is described in Pinfinder User Manual, trubleshooting section

JAVA Good · 01-31-2010, 14:26

tks for your reply,

I don't use Pinfinder all the time, and sorry for don't know this information about modify my box, I see this about 1 year ago, but never search what is it.

so my box is an Dual output, I need cut the diode and put a small cable ?

and just before this cutting, it's normaly I have about 4,5v on power cable of pinfinder ? even I have this I need change cut this diode ?

Dual output box.jpg

I open my phone and it's a :

MT6225A
0831 - ABTL
KTFU9300

mt6225_.jpg

tks in advance for your help and reply,

Best Regards,
JAVA Good.

JAVA Good · 01-31-2010, 19:29

I open my Dual output box and cut the diode like the manuel, now my phone phone can power on but power after 4 seconds,

so I need modify add a capacitor 1000 mf on my pinfinder box ? I have this box :

IMAG0059.jpg IMAG0060.jpg

tks in advance for your reply,

Best Regards,
JAVA Good.

InfinityHelp · 01-31-2010, 19:30

hello!

no you dont. just turn Silent mode on phone before operations

JAVA Good · 01-31-2010, 19:34

ok tks, maybe disactivate the vibror also ?

Best Regards,
JAVA Good.

InfinityHelp · 01-31-2010, 20:23

hello!

ussually sound take most of energy.
so just turning it off by pressing and holding # is ok

JAVA Good · 02-01-2010, 11:19

tks again, I use the L20A cable and find pinout and I read the phone with small cable between GND batterie connector AND GND or RJ45 cable of pinfinder (and I have a small idea about GND I share it after reseolve this probleme), there the logs of this phone :*

Quote:

Action: read/check information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6225, E03
Hardware version: MT6225_GEMINI_HW
Software version: M600_HV1_V2.0_MULTI_
Software date: 2006.06.14
Barcode: MT012345678901234567
imei-1: 135790246811220
imei-2: 135790246811220
imei-3: 135790246811220
Finished, time used: 14 sec
Remove/Install battery now !

chines miracle.gif

picture of Pinfinder :
pinfinder.gif

so now what is the best way for for resolve the network probleme, format FFS, flash the phone ? or what pls ?

Best Regards,
JAVA Good.

algerienbox · 02-01-2010, 11:23

repair your imie ( 1st and 2sc imie) and see

JAVA Good · 02-01-2010, 11:25

I think I find the flash file, but need some information, they have only one file for 2 CPU or ?, and they have eeprom file too or no pls ?

flash file.gif

Best Regards,
JAVA Good.

JAVA Good · 02-01-2010, 11:36

tks for your reply algerienbox, you tell me repair IMEI you mean change it, because have one network work good and other don't work ?

and if I save the flash file and eeprom, can play with it and restore all in the and, it's my first chines phone, if you are Algerian like on your name, I think you have many of this phones in your country, anny information is welcom

.

Best Regards,
JAVA Good.

01-30-2010, 19:45	#2 (permalink)
JAVA Good No Life Poster Join Date: May 2004 Age: 54 Posts: 2,440 Member: 66136 Status: Offline Thanks Meter: 200	hello all, I use my tester and find ( normaly ) Tx and Rx, but can't read information of phone, anny one have idea pls, I put 2 sim card, and on one network when I go for calibrate the network the phone show and error with MTK message ? Best Regards, JAVA Good.

01-30-2010, 20:35	#4 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,536	hello! first of all: what MCU it is based on? and the second Tx/Rx pins must have 2,8 volts, not 3,8

01-30-2010, 21:50	#5 (permalink)
JAVA Good No Life Poster Join Date: May 2004 Age: 54 Posts: 2,440 Member: 66136 Status: Offline Thanks Meter: 200	tks for the inforlmation about 2.8, because I forget and search the picture on my file but don't find it, with information for find Tx and Rx, and about MCU I think is a 6225 like on this message, but not sure, I see again the phone tomorow and post result, and big tks for your reply and help with RJ45 cable with + and - of pinfinder I can't power on the phone, this is normal ? Best Regards, JAVA Good.

01-31-2010, 14:26	#7 (permalink)
JAVA Good No Life Poster Join Date: May 2004 Age: 54 Posts: 2,440 Member: 66136 Status: Offline Thanks Meter: 200	tks for your reply, I don't use Pinfinder all the time, and sorry for don't know this information about modify my box, I see this about 1 year ago, but never search what is it. so my box is an Dual output, I need cut the diode and put a small cable ? and just before this cutting, it's normaly I have about 4,5v on power cable of pinfinder ? even I have this I need change cut this diode ? Dual output box.jpg I open my phone and it's a : MT6225A 0831 - ABTL KTFU9300 mt6225_.jpg tks in advance for your help and reply, Best Regards, JAVA Good.

01-31-2010, 19:29	#8 (permalink)
JAVA Good No Life Poster Join Date: May 2004 Age: 54 Posts: 2,440 Member: 66136 Status: Offline Thanks Meter: 200	I open my Dual output box and cut the diode like the manuel, now my phone phone can power on but power after 4 seconds, so I need modify add a capacitor 1000 mf on my pinfinder box ? I have this box : IMAG0059.jpg IMAG0060.jpg tks in advance for your reply, Best Regards, JAVA Good.

01-31-2010, 19:30	#9 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,536	hello! no you dont. just turn Silent mode on phone before operations

01-31-2010, 19:34	#10 (permalink)
JAVA Good No Life Poster Join Date: May 2004 Age: 54 Posts: 2,440 Member: 66136 Status: Offline Thanks Meter: 200	ok tks, maybe disactivate the vibror also ? Best Regards, JAVA Good.

01-31-2010, 20:23	#11 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,536	hello! ussually sound take most of energy. so just turning it off by pressing and holding # is ok

02-01-2010, 11:23	#13 (permalink)
algerienbox No Life Poster Join Date: Sep 2007 Location: algeria Posts: 2,360 Member: 591880 Status: Offline Thanks Meter: 561	repair your imie ( 1st and 2sc imie) and see

02-01-2010, 11:25	#14 (permalink)
JAVA Good No Life Poster Join Date: May 2004 Age: 54 Posts: 2,440 Member: 66136 Status: Offline Thanks Meter: 200	I think I find the flash file, but need some information, they have only one file for 2 CPU or ?, and they have eeprom file too or no pls ? flash file.gif Best Regards, JAVA Good.

02-01-2010, 11:36	#15 (permalink)
JAVA Good No Life Poster Join Date: May 2004 Age: 54 Posts: 2,440 Member: 66136 Status: Offline Thanks Meter: 200	tks for your reply algerienbox, you tell me repair IMEI you mean change it, because have one network work good and other don't work ? and if I save the flash file and eeprom, can play with it and restore all in the and, it's my first chines phone, if you are Algerian like on your name, I think you have many of this phones in your country, anny information is welcom . Best Regards, JAVA Good.