zte optus p650 pro unlock failed. - GSM-Forum

cxl2156565 · 01-01-2021, 21:45

Card found : D00F8165 , v0146
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.09

Load IDBase v8331 Ok!

Operation : SP Unlock [ v2.09 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : OPT_AU_Z6351OV1.0.0B07
Platform Version: MOCORTM_18B_W20.24.2_P3_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_W20.24.2_P3
HW Version: sc9863A_modem
CMP_Time : 07-25-2020 16:09:00

MODEM TAG : MOCORTM_18B_W20.24.2_P3_Debug_FM_BASE_18B_W20.24.2 _P3_sc9863A_modem_sharkl3_pub

NVMng : SecurityInfo
IMEI[1] : 863566050040290
IMEI[2] : 867400020316620
WIFIMAC : B41C30F6FD91
BT_MAC : 386E881F2C1A
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!
Connecting to server...
Connected
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 5, price:5
Process...
Process faled: wrong input data

Reconnect Power/Cable!

Operation : SP Unlock [ v2.09 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : OPT_AU_Z6351OV1.0.0B07
Platform Version: MOCORTM_18B_W20.24.2_P3_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_W20.24.2_P3
HW Version: sc9863A_modem
CMP_Time : 07-25-2020 16:09:00

MODEM TAG : MOCORTM_18B_W20.24.2_P3_Debug_FM_BASE_18B_W20.24.2 _P3_sc9863A_modem_sharkl3_pub

NVMng : SecurityInfo
IMEI[1] : 863566050040290
IMEI[2] : 867400020316620
WIFIMAC : B41C30F6FD91
BT_MAC : 386E881F2C1A
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!
Connecting to server...
Connected
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 5, price:5
Process...
Process faled: wrong input data

Reconnect Power/Cable!

Operation : SP Unlock [ v2.09 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : OPT_AU_Z6351OV1.0.0B07
Platform Version: MOCORTM_18B_W20.24.2_P3_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_W20.24.2_P3
HW Version: sc9863A_modem
CMP_Time : 07-25-2020 16:09:00

MODEM TAG : MOCORTM_18B_W20.24.2_P3_Debug_FM_BASE_18B_W20.24.2 _P3_sc9863A_modem_sharkl3_pub

NVMng : SecurityInfo
IMEI[1] : 863566050040290
IMEI[2] : 867400020316620
WIFIMAC : B41C30F6FD91
BT_MAC : 386E881F2C1A
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 2C
Status : Locked! Server unlock required!
Connecting to server...
Connected
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 5, price:5
Process...
Process faled: wrong input data

Reconnect Power/Cable!

Operation : SP Unlock [ v2.09 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
>>> ERROR : Protocol HandShake failed!

>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : SP Unlock [ v2.09 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
>>> ERROR : Protocol HandShake failed!

>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : SP Unlock [ v2.09 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

yuranc8 · 01-02-2021, 11:22

Hello try with new version SP2 2.10 download on support

edisonsuen · 04-14-2022, 04:15

Quote:

Originally Posted by yuranc8

Hello try with new version SP2 2.10 download on support

hi sir which brande and cpu need to choose for this model?

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

yuranc8 · 04-14-2022, 06:26

Quote:

Originally Posted by edisonsuen

hi sir which brande and cpu need to choose for this model?

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Hello ZTE, but You can download Firmware (support area, Google so on) select and try again, or try in diag mode!

edisonsuen · 04-14-2022, 07:07

i want to get network unlocked of this model.

yuranc8 · 04-14-2022, 07:11

Quote:

Originally Posted by edisonsuen

i want to get network unlocked of this model.

Friend try in diag mode! or flash mode using PAC firmware to boot it!

YellowBoss · 04-14-2022, 13:09

Quote:

Originally Posted by edisonsuen

i want to get network unlocked of this model.

Select another base/model or use .pac file as loader.
What is the result?

AFRONILE · 08-14-2023, 20:47

for real, I used my dongle to unlock a zte, i don't remember its model, but i will upload its log tomorrow, about 5 or 7 days ago, and I think it's was not supported but I decided to give it a try, you discounted 5 credit without unlock it and I was wrong because of lastes hope of unlock this device through your CM2SP2

My question is?
Is this model with android 11 supported on diag mode, if so, which security xx/xx/xxxx

AFRONILE · 08-15-2023, 12:45

ZTE P630 DONE BUT STILL LOCKED

Code:

 
Operation : SP Unlock [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : OPT_AU_Z6357OV1.0.0B09
Platform Version: MOCORTM_22A_W22.51.2_Debug
Project Version:   sharkl3_pub
BASE  Version:    4G_MODEM_22A_W22.51.2
HW Version:        sc9863A_modem

MODEM TAG : MOCORTM_22A_W22.51.2_Debug_4G_MODEM_22A_W22.51.2_sc9863A_modem_sharkl3_pub

NVMng  : SecurityInfo 
IMEI[1] : XXXX71060142301
IMEI[2] : XXXX00020316620
WIFIMAC : 103C59024E73
BT_MAC  : 50AF4DBF518A
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 24
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 132,  price:5
Process...
Process : Operation may took 10-15 minutes!


>>>  Repeat unlock/repair procedure after requested time again!

Reconnect Power/Cable!

I'M ASKING IF ZTE P651 2021 ANDROID 11 SUPPORTED, LOG:

Code:

 Card found : 04105586 , v0156
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Identify [ v2.14 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : OPT_AU_Z6355OV1.0.0B12
MemoryInfo : EMMC :  32 GB  ;  DRAM : 3 GB

Platform Version: MOCORTM_20A_W20.47.1_P24_Debug
Project Version:   sharkl3_pub
BASE  Version:    4G_MODEM_20A_W20.47.1_P24
HW Version:        sc9863A_modem
CMP_Time : 12-10-2021 12:56:06

MODEM TAG : MOCORTM_20A_W20.47.1_P24_Debug_4G_MODEM_20A_W20.47.1_P24_sc9863A_modem_sharkl3_pub


PSN1 : 741997502002
PSN2 : 320323836282

NVMng  : SecurityInfo 
IMEI[1] : XXXX31050367268
IMEI[2] : 111111111111119
WIFIMAC : B00AD50F759F
BT_MAC  : 50AF4D0BCE34
SEC : SLS:2, SKS:0, SKV:4


Done!
Elapsed: 00:00:35

JayDi · 08-15-2023, 17:17

Quote:

>>> Repeat unlock/repair procedure after requested time again!

It ask for repeat same target unlock after several time.
Normally it took nowdays 1-3 minutes.

AFRONILE · 08-15-2023, 19:11

Quote:

Originally Posted by JayDi

It ask for repeat same target unlock after several time.
Normally it took nowdays 1-3 minutes.

I already repeated 2 time bro, Thx u for your reply

I want report ZTE P651 2021 Now it's Working, I do it on FLASH MODE

sahelkhan022 · 08-31-2023, 21:02

ZTE P630 not detected which model to select

01-01-2021, 21:45	#1 (permalink)
cxl2156565 Freak Poster Join Date: Jul 2011 Location: SUVA Posts: 306 Member: 1622774 Status: Offline Sonork: 34610 Thanks Meter: 37	zte optus p650 pro unlock failed. Card found : D00F8165 , v0146 Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.09 Load IDBase v8331 Ok! Operation : SP Unlock [ v2.09 ] BootMode : SVC 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! SOC GEN : UniSoc ( E-family and Modern ) BuildInfo : OPT_AU_Z6351OV1.0.0B07 Platform Version: MOCORTM_18B_W20.24.2_P3_Debug Project Version: sharkl3_pub BASE Version: FM_BASE_18B_W20.24.2_P3 HW Version: sc9863A_modem CMP_Time : 07-25-2020 16:09:00 MODEM TAG : MOCORTM_18B_W20.24.2_P3_Debug_FM_BASE_18B_W20.24.2 _P3_sc9863A_modem_sharkl3_pub NVMng : SecurityInfo IMEI[1] : 863566050040290 IMEI[2] : 867400020316620 WIFIMAC : B41C30F6FD91 BT_MAC : 386E881F2C1A SEC : SLS:2, SKS:0, SKV:4 SLStatus : 2C Status : Locked! Server unlock required! Connecting to server... Connected Authenticating... Authenticated Checking Client version... Client version Ok Balance: 5, price:5 Process... Process faled: wrong input data Reconnect Power/Cable! Operation : SP Unlock [ v2.09 ] BootMode : SVC 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! SOC GEN : UniSoc ( E-family and Modern ) BuildInfo : OPT_AU_Z6351OV1.0.0B07 Platform Version: MOCORTM_18B_W20.24.2_P3_Debug Project Version: sharkl3_pub BASE Version: FM_BASE_18B_W20.24.2_P3 HW Version: sc9863A_modem CMP_Time : 07-25-2020 16:09:00 MODEM TAG : MOCORTM_18B_W20.24.2_P3_Debug_FM_BASE_18B_W20.24.2 _P3_sc9863A_modem_sharkl3_pub NVMng : SecurityInfo IMEI[1] : 863566050040290 IMEI[2] : 867400020316620 WIFIMAC : B41C30F6FD91 BT_MAC : 386E881F2C1A SEC : SLS:2, SKS:0, SKV:4 SLStatus : 2C Status : Locked! Server unlock required! Connecting to server... Connected Authenticating... Authenticated Checking Client version... Client version Ok Balance: 5, price:5 Process... Process faled: wrong input data Reconnect Power/Cable! Operation : SP Unlock [ v2.09 ] BootMode : SVC 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! SOC GEN : UniSoc ( E-family and Modern ) BuildInfo : OPT_AU_Z6351OV1.0.0B07 Platform Version: MOCORTM_18B_W20.24.2_P3_Debug Project Version: sharkl3_pub BASE Version: FM_BASE_18B_W20.24.2_P3 HW Version: sc9863A_modem CMP_Time : 07-25-2020 16:09:00 MODEM TAG : MOCORTM_18B_W20.24.2_P3_Debug_FM_BASE_18B_W20.24.2 _P3_sc9863A_modem_sharkl3_pub NVMng : SecurityInfo IMEI[1] : 863566050040290 IMEI[2] : 867400020316620 WIFIMAC : B41C30F6FD91 BT_MAC : 386E881F2C1A SEC : SLS:2, SKS:0, SKV:4 SLStatus : 2C Status : Locked! Server unlock required! Connecting to server... Connected Authenticating... Authenticated Checking Client version... Client version Ok Balance: 5, price:5 Process... Process faled: wrong input data Reconnect Power/Cable! Operation : SP Unlock [ v2.09 ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! >>> ERROR : Protocol HandShake failed! >>> Error : Fail to init protocol! >>> Remove battery, cable. Check cable and connection. Repeat operation! Reconnect Power/Cable! Operation : SP Unlock [ v2.09 ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! >>> ERROR : Protocol HandShake failed! >>> Error : Fail to init protocol! >>> Remove battery, cable. Check cable and connection. Repeat operation! Reconnect Power/Cable! Operation : SP Unlock [ v2.09 ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ...

01-02-2021, 11:22	#2 (permalink)
yuranc8 No Life Poster Join Date: Feb 2017 Location: Quelimane Mz Age: 26 Posts: 2,210 Member: 2680008 Status: Offline Thanks Meter: 1,640	Hello try with new version SP2 2.10 download on support

04-14-2022, 07:07	#5 (permalink)
edisonsuen Freak Poster Join Date: Mar 2008 Location: australia Posts: 389 Member: 721542 Status: Offline Thanks Meter: 56	i want to get network unlocked of this model.

08-14-2023, 20:47	#8 (permalink)
AFRONILE Junior Member Join Date: Jun 2019 Location: Error 404 Posts: 23 Member: 2916233 Status: Offline Thanks Meter: 4	for real, I used my dongle to unlock a zte, i don't remember its model, but i will upload its log tomorrow, about 5 or 7 days ago, and I think it's was not supported but I decided to give it a try, you discounted 5 credit without unlock it and I was wrong because of lastes hope of unlock this device through your CM2SP2 My question is? Is this model with android 11 supported on diag mode, if so, which security xx/xx/xxxx

08-31-2023, 21:02	#12 (permalink)
sahelkhan022 Junior Member Join Date: Jul 2015 Posts: 26 Member: 2434831 Status: Offline Thanks Meter: 4	ZTE P630 not detected which model to select