have someone build a working philips 362 cable!! - GSM-Forum

.:bono:. · 12-13-2005, 02:55

i was trying to built this cable all the day, but can't connect my phone

though the cable is easy to make if i see the pinout gaven in this forum!!!
1IIIIIIIIIIIIIIIII18
2,5,17-gnd
6-tx
7-rx
i reversed the conector, reverse also tx and rx, i have disconnect pin17 but no sucsses!
i used unibox and samsung connector, could someone show me in colors where to put the red, white, grean wires?
thanks

Thunderstorm · 12-13-2005, 08:09

Quote:

Originally Posted by bono_x100

i was trying to built this cable all the day, but can't connect my phone

though the cable is easy to make if i see the pinout gaven in this forum!!!
1IIIIIIIIIIIIIIIII18
2,5,17-gnd
6-tx
7-rx
i reversed the conector, reverse also tx and rx, i have disconnect pin17 but no sucsses!
i used unibox and samsung connector, could someone show me in colors where to put the red, white, grean wires?
thanks

Use resistor to the TX mate, that should solve your problem.

WBR ThunderStorm

.:bono:. · 12-14-2005, 00:11

i did it but no succes
plz, i see many here built this cable, if it works, so it's mean that it exist one real working pinout.
for who have done it plz give me this pinout
thanks

bmj · 12-18-2005, 14:57

Quote:

Originally Posted by bono_x100

i was trying to built this cable all the day, but can't connect my phone

though the cable is easy to make if i see the pinout gaven in this forum!!!
1IIIIIIIIIIIIIIIII18
2,5,17-gnd
6-tx
7-rx
i reversed the conector, reverse also tx and rx, i have disconnect pin17 but no sucsses!
i used unibox and samsung connector, could someone show me in colors where to put the red, white, grean wires?
thanks

goooooooooood chance

.:bono:. · 12-18-2005, 18:07

thanks mate, i have what u gave me, but it doesn't help for this phone

Thunderstorm · 12-22-2005, 16:58

Quote:

Originally Posted by bono_x100

thanks mate, i have what u gave me, but it doesn't help for this phone

Mate if you are so good in cable building like im, better to buy a ready one cable or let some good hardware man make it. On more time: there must resistor to TX, GND must be connected to pin 17. In some cases helps also to set latency comport property to 4 or 1.

WBR ThunderStorm

.:bono:. · 12-22-2005, 18:22

Quote:

Originally Posted by Thunderstorm

Mate if you are so good in cable building like im, better to buy a ready one cable or let some good hardware man make it. On more time: there must resistor to TX, GND must be connected to pin 17. In some cases helps also to set latency comport property to 4 or 1.
WBR ThunderStorm

soldring pins doesn't need to be a good cable builder

all i need is a pinout, ok i know it now , but it don't work for me!!
plz, could u tell me the value of the resistor?
thanks

Minos GSM · 01-06-2006, 11:35

do this pinout and it work fine with universal,if you want i send you color

fadhel · 01-08-2006, 13:54

yes color please,thanks

12-13-2005, 02:55	#1 (permalink)
.:bono:. No Life Poster Join Date: Dec 2004 Location: Algeria Posts: 3,142 Member: 96141 Status: Offline Thanks Meter: 200	have someone build a working philips 362 cable!! i was trying to built this cable all the day, but can't connect my phone though the cable is easy to make if i see the pinout gaven in this forum!!! 1IIIIIIIIIIIIIIIII18 2,5,17-gnd 6-tx 7-rx i reversed the conector, reverse also tx and rx, i have disconnect pin17 but no sucsses! i used unibox and samsung connector, could someone show me in colors where to put the red, white, grean wires? thanks

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
need help for unlocking philips 362 by cable or by imei	thiam	Philips	3	10-16-2006 04:11
philips 362 dead after reflashe it withe jaf philips sof help please	yane	JAF Xtras	1	10-12-2006 12:02
working cable for philips 362 tested 100%	sam unlocker	Philips	3	01-17-2006 18:56
working cable for philips 362 tested 100%	sam unlocker	Philips	10	01-13-2006 20:35
Have someone working BDM interface	repraky	Motorola Old Legacy (EMMI)	3	05-31-2000 22:02

12-14-2005, 00:11	#3 (permalink)
.:bono:. No Life Poster Join Date: Dec 2004 Location: Algeria Posts: 3,142 Member: 96141 Status: Offline Thanks Meter: 200	i did it but no succes plz, i see many here built this cable, if it works, so it's mean that it exist one real working pinout. for who have done it plz give me this pinout thanks

12-18-2005, 18:07	#5 (permalink)
.:bono:. No Life Poster Join Date: Dec 2004 Location: Algeria Posts: 3,142 Member: 96141 Status: Offline Thanks Meter: 200	thanks mate, i have what u gave me, but it doesn't help for this phone

01-06-2006, 11:35	#8 (permalink)
Minos GSM No Life Poster Join Date: Jun 2005 Location: tunisia Age: 41 Posts: 643 Member: 153926 Status: Offline Thanks Meter: 23	do this pinout and it work fine with universal,if you want i send you color

01-08-2006, 13:54	#9 (permalink)
fadhel No Life Poster Join Date: Sep 2003 Location: Here Posts: 1,370 Member: 39196 Status: Offline Thanks Meter: 126	yes color please,thanks