3120c not working after unloking with mt box - GSM-Forum

onu · 03-20-2009, 20:32

very strange problem: my 3120c is not working after unloking with mt box. after reading full pm i pushed the dksl2 button and the program stop working. after 1-2 minutes program restart and now my phone is not working. it is blinking and no local mode anymore, so i can't write the pm but i can flash the phone. i did this(flashing) with the original product code with all programs : mt box, jaf, phoenix and hwk but still same problem: for 2 seconds nokia then white display and after another 2 seconds the phone is off. any solution for me?

alkazeltser · 03-20-2009, 20:49

Tried with 10pin cable, also try to upload oldest firmware then the newest one. Sometimes works for me in other models.

stanner_austin · 03-21-2009, 08:00

Quote:

Originally Posted by onu

very strange problem: my 3120c is not working after unloking with mt box. after reading full pm i pushed the dksl2 button and the program stop working. after 1-2 minutes program restart and now my phone is not working. it is blinking and no local mode anymore, so i can't write the pm but i can flash the phone. i did this(flashing) with the original product code with all programs : mt box, jaf, phoenix and hwk but still same problem: for 2 seconds nokia then white display and after another 2 seconds the phone is off. any solution for me?

easy
you have full pm backup?
if yes

search for npc damage rpl by me.
backup your existing rpl with jaf and mt box both in case any of fail to backup something.
write npc damage rpl.
now phone is in special mode "security bypass"
working perfect but imei damaged.
restore your full backup pm.
be sure that your phone have same version which version pm was backup.

restore it few time every time you restore don't forget to restart or replug phone and test simlock.

now rewrite backup npc or backup.rpl

phone should be ok but at locked condition i guess.

ajith.k · 04-15-2009, 07:07

my three 3120c same problom

ajith.k · 04-15-2009, 07:09

Quote:

Originally Posted by onu

very strange problem: my 3120c is not working after unloking with mt box. after reading full pm i pushed the dksl2 button and the program stop working. after 1-2 minutes program restart and now my phone is not working. it is blinking and no local mode anymore, so i can't write the pm but i can flash the phone. i did this(flashing) with the original product code with all programs : mt box, jaf, phoenix and hwk but still same problem: for 2 seconds nokia then white display and after another 2 seconds the phone is off. any solution for me?

help i also do like this my three 3120c same problom help

ajith.k · 04-15-2009, 08:48

Quote:

Originally Posted by stanner_austin

easy
you have full pm backup?
if yes

search for npc damage rpl by me.
backup your existing rpl with jaf and mt box both in case any of fail to backup something.
write npc damage rpl.
now phone is in special mode "security bypass"
working perfect but imei damaged.
restore your full backup pm.
be sure that your phone have same version which version pm was backup.

restore it few time every time you restore don't forget to restart or replug phone and test simlock.

now rewrite backup npc or backup.rpl

phone should be ok but at locked condition i guess.

i dont understand what is npc

suspans · 04-15-2009, 09:20

Quote:

Originally Posted by ajith.k

i dont understand what is npc

Read This : http://forum.gsmhosting.com/vbb/showthread.php?t=441591

ajith.k · 04-15-2009, 11:01

[QUOTE=suspans;4358421]Read This : http://forum.gsmhosting.com/vbb/showthread.php?t=441591[/QUOTE i try to unlock with 3120c with mt-box but now only nokia coming in seconds then blinking whitescreen and off plsss help 3 phone same problom

ajith.k · 04-15-2009, 11:08

Quote:

Originally Posted by suspans

Read This : http://forum.gsmhosting.com/vbb/showthread.php?t=441591

sir i try to unlock three 3120c but now only nokia coming and blinking white screen and power off please help

03-20-2009, 20:32	#1 (permalink)
onu Freak Poster Join Date: Dec 2004 Location: romania Age: 45 Posts: 155 Member: 101586 Status: Offline Thanks Meter: 6	3120c not working after unloking with mt box very strange problem: my 3120c is not working after unloking with mt box. after reading full pm i pushed the dksl2 button and the program stop working. after 1-2 minutes program restart and now my phone is not working. it is blinking and no local mode anymore, so i can't write the pm but i can flash the phone. i did this(flashing) with the original product code with all programs : mt box, jaf, phoenix and hwk but still same problem: for 2 seconds nokia then white display and after another 2 seconds the phone is off. any solution for me?

04-15-2009, 07:07	#4 (permalink)
ajith.k Major Poster Join Date: Oct 2006 Location: diera dubai Posts: 43 Member: 378867 Status: Offline Thanks Meter: 0	hai my three 3120c same problom

04-15-2009, 11:01	#8 (permalink)
ajith.k Major Poster Join Date: Oct 2006 Location: diera dubai Posts: 43 Member: 378867 Status: Offline Thanks Meter: 0	3120 problom (strange) [QUOTE=suspans;4358421]Read This : http://forum.gsmhosting.com/vbb/showthread.php?t=441591[/QUOTE i try to unlock with 3120c with mt-box but now only nokia coming in seconds then blinking whitescreen and off plsss help 3 phone same problom

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
i want shematic for cable n95 that are working very good with MT BOX	dvdaio	UFS2 + UFS3-Tornadoflasher	0	07-14-2007 01:12
k750-cid49 died after unlock with MT-Box	dragosgsm	MT-BOX	6	12-12-2006 06:02
N71 contact retailer after flash with MT box	tgsm	MT-BOX	5	08-27-2006 18:22
6630 Simlocked After Flashing With Mt-box!please Help!	KUBAT1	MT-BOX	6	06-22-2006 12:13
7260 dead after flash with mt box	lesansan	MT-BOX	3	04-29-2006 21:47

03-20-2009, 20:49	#2 (permalink)
alkazeltser Major Poster Join Date: May 2004 Age: 47 Posts: 40 Member: 66945 Status: Offline Thanks Meter: 2	Tried with 10pin cable, also try to upload oldest firmware then the newest one. Sometimes works for me in other models.