5800 auto restart - GSM-Forum

sabisafi · 06-18-2009, 09:13

hi mate,
my 5800 always auto restarting..finished formating,flashed with new software 21.0.025 ..same..please help

ch mobiles · 06-18-2009, 09:32

plz post ur log here.

DrScorpio · 06-18-2009, 09:46

What cause this problem ??? Do you have any idea ???

ch mobiles · 06-18-2009, 10:16

i think watch dog timer is on & perfect solution is rpl

i have nokia 6300 same problem.

DrScorpio · 06-18-2009, 14:47

Just try to full flash phone with latest flash files. If it's software problem it'll be solved.

cellab · 06-18-2009, 14:52

Nokia N78 - Flash failure. here is the log:

VPP is DISABLED.
BB5 PM back Phone is in: Phone is not responding!
Processing File: RM-235_12.046_prd.core.fpsx
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
CMT Certificates
Erase RAP3 [00040000 - 00082FFF]
Erase RAP3 [00083400 - 003FFFFF]
Erase RAP3 [00400000 - 0095FFFF]
Erase RAP3 [00C60000 - 0A87FFFF]
Erase[165.25 MB]...
Waiting response for 320 Sec...in 5.14s
Flash[82.72 MB]...
%%%%%%%% ERROR SENDING FLASH:
Failed at address 00000000

DrScorpio · 06-18-2009, 15:53

To cellab what is the history of this phone ? What happened to it ?

sabisafi · 06-18-2009, 18:35

Quote:

Originally Posted by DrScorpio

Just try to full flash phone with latest flash files. If it's software problem it'll be solved.

flashed with new software,....but still same

sabisafi · 06-18-2009, 18:44

Quote:

Originally Posted by ch mobiles

plz post ur log here.

JAF version 1.98.62
Detected PKEY: ---------
Card life counter: 83.52%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\
Scanning ini files...
Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM-356_21.0.025_prd.core.C00
PPM Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM-356_21.0.025_prd.rofs2.V01
CNT Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM-356_21.0.025_C01_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM356_20.0.010_008_xxx_U01.uda.fpsx
Languages in ppm: English,French,German,Italian,Spanish,Portuguese
Changing flashing settings...
Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM-356_21.0.025_prd.core.C00
PPM Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM-356_21.0.025_prd.rofs2.V08
CNT Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM-356_21.0.025_C01_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM356_20.0.010_008_xxx_U01.uda.fpsx
Languages in ppm: English,Hebrew,Arabic,Russian,Spanish
Detected P-KEY: --------
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 007.016.022
Elf2flash 08.37.001
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting..................PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
PUBKEYS already sent...
...........Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 583, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM-356_21.0.025_prd.core.C00...
Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
Partition result: 0014
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM-356_21.0.025_prd.rofs2.V08...
Erasing cmt zone 06560000 - 0915FFFF ... Erase result: 0000
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM-356_21.0.025_C01_prd.rofs3.fpsx...
Erasing cmt zone 09160000 - 09E5FFFF ... Erase result: 0000
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM356_20.0.010_008_xxx_U01.uda.fpsx...
Erasing cmt zone 09E60000 - 0F71FFFF ... Erase result: 0000
Send CMT CFG...
Writing cmt...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM-356_21.0.025_prd.core.C00...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
cmt->PAPUB keys already sent...
cmt->PAPUB keys already sent...
cmt->PAPUB keys already sent...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*ENO
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM-356_21.0.025_prd.rofs2.V08...
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM-356_21.0.025_C01_prd.rofs3.fpsx...
Sending CMT HASH for SOS+ROFS3
Write result 27: 1701
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356\RM356_20.0.010_008_xxx_U01.uda.fpsx...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: V ICPR72_09w06.2
03-03-09
RM-356
(c) Nokia
APESW: V 21.0.025
VariantSW: V 21.0.025
Prodcode: 0559408
Setting test mode...
Failed! Aborting!
DCT4/BB5 counter: 317
Done!

factory settings also ok

but same as before

DrScorpio · 06-19-2009, 08:39

In such case it's hardware problem.

cellab · 06-20-2009, 13:25

My phone switched on and off by itself, had network failure. I tried to sync and found virus. Then I formatted it and then tried to flash it to upgrade to software version.

DrScorpio · 06-22-2009, 09:09

Quote:

Originally Posted by cellab

My phone switched on and off by itself, had network failure. I tried to sync and found virus. Then I formatted it and then tried to flash it to upgrade to software version.

Check your cable. It must be 7 pin connection. If cable are OK. Try to flash your phone with USB. Remember that flash file must be same or higher version.

venuscomm · 06-22-2009, 09:34

beware of the screen sensor!!!! it will have such problem if the parts have problem

cellab · 06-23-2009, 07:38

Hi. Thanks. I flash with another cable and using JAF. The phone is ok.

FEATURE GSM™ · 06-23-2009, 09:05

Quote:

Originally Posted by sabisafi

flashed with new software,....but still same

yes you can try the other box i thinks software problem try

06-18-2009, 09:13	#1 (permalink)
sabisafi Junior Member Join Date: Mar 2008 Posts: 20 Member: 735111 Status: Offline Sonork: safeer4u Thanks Meter: 4	5800 auto restart hi mate, my 5800 always auto restarting..finished formating,flashed with new software 21.0.025 ..same..please help

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
nokia 5800 auto on of	shakeel0836	Nokia Hardware & Hardware Repair	4	03-10-2010 10:45
5800 auto work kepaid	anwar030	Nokia Base Band 5 ( BB-5 )	1	03-09-2010 16:40
5800 auto restart after unlock	due	Cyclonebox	4	11-16-2009 03:12
Nokia 5800 Auto rotate not working	Denny_boy	Nokia Hardware & Hardware Repair	0	10-09-2009 09:10
a100 restart if sim inserted auto restart	BEEKUAN	Panasonic	22	02-01-2005 18:16

06-18-2009, 09:32	#2 (permalink)
ch mobiles No Life Poster Join Date: Apr 2008 Location: Pakistan Age: 36 Posts: 2,134 Member: 748029 Status: Offline Sonork: 100.1603742 Thanks Meter: 1,822	plz post ur log here.

06-18-2009, 09:46	#3 (permalink)
DrScorpio Freak Poster Join Date: May 2009 Posts: 442 Member: 1035393 Status: Offline Thanks Meter: 81	What cause this problem ??? Do you have any idea ???

06-18-2009, 10:16	#4 (permalink)
ch mobiles No Life Poster Join Date: Apr 2008 Location: Pakistan Age: 36 Posts: 2,134 Member: 748029 Status: Offline Sonork: 100.1603742 Thanks Meter: 1,822	i think watch dog timer is on & perfect solution is rpl i have nokia 6300 same problem.

06-18-2009, 14:47	#5 (permalink)
DrScorpio Freak Poster Join Date: May 2009 Posts: 442 Member: 1035393 Status: Offline Thanks Meter: 81	Just try to full flash phone with latest flash files. If it's software problem it'll be solved.

06-18-2009, 14:52	#6 (permalink)
cellab Junior Member Join Date: Feb 2008 Posts: 24 Member: 706045 Status: Offline Thanks Meter: 7	Nokia N78 - Flash failure. here is the log: VPP is DISABLED. BB5 PM back Phone is in: Phone is not responding! Processing File: RM-235_12.046_prd.core.fpsx Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg CMT Certificates Erase RAP3 [00040000 - 00082FFF] Erase RAP3 [00083400 - 003FFFFF] Erase RAP3 [00400000 - 0095FFFF] Erase RAP3 [00C60000 - 0A87FFFF] Erase[165.25 MB]... Waiting response for 320 Sec...in 5.14s Flash[82.72 MB]... %%%%%%%% ERROR SENDING FLASH: Failed at address 00000000

06-18-2009, 15:53	#7 (permalink)
DrScorpio Freak Poster Join Date: May 2009 Posts: 442 Member: 1035393 Status: Offline Thanks Meter: 81	To cellab what is the history of this phone ? What happened to it ?

06-19-2009, 08:39	#10 (permalink)
DrScorpio Freak Poster Join Date: May 2009 Posts: 442 Member: 1035393 Status: Offline Thanks Meter: 81	In such case it's hardware problem.

06-20-2009, 13:25	#11 (permalink)
cellab Junior Member Join Date: Feb 2008 Posts: 24 Member: 706045 Status: Offline Thanks Meter: 7	My phone switched on and off by itself, had network failure. I tried to sync and found virus. Then I formatted it and then tried to flash it to upgrade to software version.

06-22-2009, 09:34	#13 (permalink)
venuscomm Junior Member Join Date: May 2004 Age: 46 Posts: 11 Member: 66977 Status: Offline Thanks Meter: 2	beware of the screen sensor!!!! it will have such problem if the parts have problem

06-23-2009, 07:38	#14 (permalink)
cellab Junior Member Join Date: Feb 2008 Posts: 24 Member: 706045 Status: Offline Thanks Meter: 7	Hi. Thanks. I flash with another cable and using JAF. The phone is ok.