BB5 Contact Service, Restart Problem,How To Erase BB5, Restore PM and RPL Backup!!!

[kashi4gul]

Hi to all,
I saw here many times peoples are having with this "Contact Service or Provider" problem and also unable to Write or Restore the Orignal backup to the Phone.
Stanner's alreday Posted abt it all in his own F.A.Q but i dont know why the peoples does not follow Stanner's Instructions.

I just follow Him (stanner) and learned how to repair BB5 Contact Service/Retailer, how to erase BB5 and Restore PM and RPL Backup!!!

Now we shall more reflect upon this matter;

- How To Remove Contact Service or Provider ?

Firstly we should get Phone Info and see Imei and SL (Sim Lock) Zone are damaged or Not.

Get Phone Info:

In Case when you got Damaged Imei: 123456789012345 and you dont have Orignal RPL Backup then free way is try to solve this problem by downgrading if Imei and SP Data is still damage, then Upgrade it back and you must need to buy an new RPL to fix this problem. Use ASK to RPL Service.

In Case when Phone Imei is oK but Only SL Zone is damaged and you don't have Orignal PM 308 backup then wat to do.

If Courpted SP Data looks like this below:

CONFIG KEY: FFFFFFFFFFFFFFFF
PROVIDER KEY: FFFFFFFFFFFFFFFF
Provider: Unknown provider

And phone is supported for Unlocking, then you can try to Repair it free with any BB5 Unlocker by Unlock Button or with Repair SP Data Option. (It should Repair) Otherewise you may need to New RPL.

And If Courpted SP Data looks like this:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 0000000000000000
Provider: Unknown provide

Then you must need to buy an New RPL whether Phone is supported with any BB5 Unlocker. We can not Repair it free, Use Ask To Rpl Service.

In Case when you have RPL Backup and have not PM 308, you can only Restore the Phone Imei but you can not Repair the Courpted SP Data like this: PROVIDER KEY: 0000000000000000, Provider: Unknown provide

In Case when you have PM 308 backup and have not RPL, you can Repair SP Data but you can not Repair Phone Imei by only PM 308 backup. Use ASK To RPL Service.

In Case when Phone Imei and SL Zone both are OK but phone is still on Contact Service/Provider.

First take Self Test and check ST Security Test is Passed or Failed?
If Passed then do File System Formate and after that make Factory Setting and see problem is solved or not, if still same then check phone hardware.

And if ST Security Test is Failed then Write PM Field [1] And [309] as stanner said, (or full pm as you wish) by using SX4 Auth Service and after that make Factory Setting. Oftenly Phone can Repair by Downgrading
and Writing RPL.
Then Write PM With SX4 if same then Update back and See problem is Solved or not. (It should work now!) otherwise try to repair it by erasing method.

- How To Remove Restart Problem when Phone Imei is oK but Phone goes to Restart or Shut Off after a while.

In this case first try to solve this problem by only Write Full Modified (Without 308 Field) PM With SX4 Auth.
Use SX4 and when it done Successfully then immediately Write supported full modified PM to the phone and check phone without MMC, problem is fixed or not, if not then Full Flash and after that Write PM with SX4, or try to solve by Downgrading.
Oftenly Restart problem is removed by only do File System Format and Factory Default. (Check phone without MMC)

Otherwise there is only one way is left to Repair it with Software and that is Erase Flash (Rap), to start the Erasing Procedure,
Follow this given below Method:

Before Start Erasing Flash, Save your both backup PM 308 and RPL backup (CRT 308 and CRT BKP)

If you are going to do erase newer BB5 + (Plus) Phone then you must Save also Full PM 0 to 400 Backup, coz you will need it for restore the orignal field 308, this is really fast easy and perfect way to restore the PM 308 Field, otherwise you may need to buy an new RPL.
So be careful. . .

Now we are ready to do erase.

Select UNI_rapido.bin in Mcu Part and click to Flash
and for MT Select uni_rap.bin as MCU.

when phone will fully erased then Phone Imei will be: 12345610654321, SP Area will damaged and
CMT Flash Data will shown: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Now Full flash with any Firmware ver but selected firmware should be not too Old or too New, coz we may need it in another case.

After Flash when phone will turn On, you will get
damaged IMEI: 12345610654321 and Courpted SP Area:
PROVIDER KEY: 0000000000000000, Provider: Unknown provide

Now first of all you have to Restore the Orignal backup of PM 308, in case when you are unable to restore the PM 308 backup then flash again with same FW when you were take backup.
When it flash successfully then plz stay a min and write it (PM 308) back to the phone, now
Disconnect phone, connect it again and see SL Zone is Repaired or Not.
(It should be repair now), if not then flash again with same FW and restore the PM 308 backup.

But if you have Full PM 0-400 backup then no need to Flash again, just Write it (Full PM 0-400 backup) back to the phone without SX4, when it done successfully then remove cable to the box, replug cable and get info
you will see SP Area is Repaired now, if not then it will be repair after writing RPL backup.

After successfully restore the PM 308 backup phone will on Contact Service/Retailers or full working phone with damaged Imei. In this condition when phone has damaged Imei: 12345610654321 you can write full modified PM (without 308 field) without using SX4, coz phone has not certificate (IMEI), therefor no need to use SX4.

Now we have to Restore RPL backup. If you are using JAF then Click on CRT Tool, now you will see BB5 Certificate Tool Window > tick on Write RPL Option and also mark on Plain RPL box, now Select your RPL backup and click on Write RPL button.
Get info now and see Imei is restored succcessfully or not phone should be on Contact Service/Retailer or fully working. . .

But if you are failed to restore the RPL backup, i mean phone Imei is still damage and phone show only Nokia and then shut Off in case now you Write blank_rpl and Flash again with Latest Firm Ware.

When it (flash process) done successfully then write RPL backup, get Info and see Imei is back or not, it (Imei) should back now, and your Phone will on Contact Service/Retailer, if Not and you got dead phone Please follow again all above erasing method.

Finally use SX4 and Write PM Field [1] and [309] (or full pm as you wish), now we have done all abt Software.
I think That's all. . . abt BB5 Repair with Erasing Method and we have confirmed now, phone has Software Problem or not.

All BB5 Full Modified PM Download Here: http://www.4shared.com/file/94212006...DIFIED_PM.html

All Nokia Latest Flash Files Download from Here: www.blue-nokia.com

_blank_RPL_ and BB5 Erase Files are Attached.



Thanks to Mr.stanner_austin (Chevli)



Best Regard's
kashi4gul

[prihir]

kashi !!

would we will do above method for nokia 6233. which one is shut of after a while ?

please guide me.

[oMeR_Rasheed]

BUTT BRO I OPEN www.blue-nokia.com BUTT I DON'T KNOW HOW TO DOWNLOAD FILE PLEASE CAN U TELL ME PLEASE
B.R
SHERRY MOBILES

[kashi4gul]

Originally Posted by prihir

kashi !!

would we will do above method for nokia 6233. which one is shut of after a while ?

please guide me.

Ofcourse the Erasing Method which i mentioned above is for All BB5
(look your Thanks )

Originally Posted by sherry_mobiles

BUTT BRO I OPEN www.blue-nokia.com BUTT I DON'T KNOW HOW TO DOWNLOAD FILE PLEASE CAN U TELL ME PLEASE
B.R
SHERRY MOBILES

downloading is very easy from www.blue-nokia.com, open site > remove cover by clicking on Close button and then Press Enter and now you will be able for downloading Flash Files.



B.R.,
kashi4gul

[StRaNgE PeRsOn]

Originally Posted by sherry_mobiles

BUTT BRO I OPEN www.blue-nokia.com BUTT I DON'T KNOW HOW TO DOWNLOAD FILE PLEASE CAN U TELL ME PLEASE
B.R
SHERRY MOBILES

use mozila firefox instead

[super decent]

Originally Posted by sherry_mobiles

BUTT BRO I OPEN www.blue-nokia.com BUTT I DON'T KNOW HOW TO DOWNLOAD FILE PLEASE CAN U TELL ME PLEASE
B.R
SHERRY MOBILES

see on left side there will be written downloads.fron downloads u can download any required file.

[mumala]

Hello , i have an n80 wich had contact service problem.
I wanted to write pm full but sx4 auth sux for jaf so i wrote
a blank rpl instead , all was good but after full pm write
phone is not passing CHK in jaf and i cannot write back
original rpl.
Please post a solution.

[kashi4gul]

Originally Posted by mumala

Hello , i have an n80 wich had contact service problem.
I wanted to write pm full but sx4 auth sux for jaf so i wrote
a blank rpl instead , all was good but after full pm write
phone is not passing CHK in jaf and i cannot write back
original rpl.
Please post a solution.

I inform you all again use _blank_rpl_ (made by chevli) only for restore pm and rpl backup if you face any problem during restore backup, otherwise _blank_rpl_ will do nothing.

anywyas currently phone is dead or alive ?

if alive plz get info and post here and if you are unable to get info then you must flash this phone and then inform abt currently phone status with logs.



B.R.,
kashi4gul

[mumala]

Originally Posted by kashi4gul

I inform you all again use _blank_rpl_ (made by chevli) only for restore pm and rpl backup if you face any problem during restore backup, otherwise _blank_rpl_ will do nothing.

anywyas currently phone is dead or alive ?

if alive plz get info and post here and if you are unable to get info then you must flash this phone and then inform abt currently phone status with logs.



B.R.,
kashi4gul

You are not listening , the phone is not dead but it CAN'T be flashed
because its not passing CHK ( cmt boot error ).
It is now getting stuck on nokia logo , it was pasing CHK and all was fine before, only problem was contact retailer.

[SHIJILFONOTLY]

@kashi4gul
AM SUPPORTED U HERE SOME VIDEO OR MANNULS

[SHIJILFONOTLY]

more screen shot here this link
http://forum.gsmhosting.com/vbb/showthread.php?t=683634

[stanner_austin]

at both condition to repair perfect need bb5 ask 2 rpl.
because if watchdog timer is on phone will off him self in 10 to 30min.
if watch dog timer is not on you can repair with notp supported any unlocker.

If Courpted SP Data looks like this below:

CONFIG KEY: FFFFFFFFFFFFFFFF
PROVIDER KEY: FFFFFFFFFFFFFFFF
Provider: Unknown provider

And phone is supported for Unlocking, then you can try to Repair it free with any BB5 Unlocker by Unlock Button or with Repair SP Data Option. (It should Repair) Otherewise you may need to New RPL.

And If Courpted SP Data looks like this:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 0000000000000000
Provider: Unknown provide

Then you must need to buy an New RPL whether Phone is supported with any BB5 Unlocker. We can not Repair it free, Use Ask To Rpl Service.

blank rpl is same (npc damage rpl by me) which was discovered by karwas and made by me to damage full npc certificate and name it "bypass security".

last but not least erase file posted by me work only on 32mb flash maxim if flash ic is bigger then it its simply erase nothing.

[beerfoote1]

Originally Posted by stanner_austin

at both condition to repair perfect need bb5 ask 2 rpl.
because if watchdog timer is on phone will off him self in 10 to 30min.
if watch dog timer is not on you can repair with notp supported any unlocker.


blank rpl is same (npc damage rpl by me) which was discovered by karwas and made by me to damage full npc certificate and name it "bypass security".

last but not least erase file posted by me work only on 32mb flash maxim if flash ic is bigger then it its simply erase nothing.

Ok. I have 2 phones (5200 and 6300) that came into my shop with powering off issues I checked and see that the config key is 0000000000. So I am assuming that its realted to watchdog timer. The problem is that since these phones came into me like this.
I will have to buy RPL to fix?
The instructions at the start of the thread will not work?

[kashi4gul]

Originally Posted by beerfoote1

Ok. I have 2 phones (5200 and 6300) that came into my shop with powering off issues I checked and see that the config key is 0000000000. So I am assuming that its realted to watchdog timer. The problem is that since these phones came into me like this.
I will have to buy RPL to fix?
The instructions at the start of the thread will not work?

config key is 0000000000 is normal but if Provider key is 0000000000000 so that is not normal, to understand which one is damaged plz get info and post here.





B.R.,
kashi4gul

[beerfoote1]

Originally Posted by kashi4gul

config key is 0000000000 is normal but if Provider key is 0000000000000 so that is not normal, to understand which one is damaged plz get info and post here.





B.R.,
kashi4gul

Ok Log for the Nokia 6300:- Provider key seems normal

Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 06.01
16-01-08
RM-217
(c) Nokia.
HW version: 3004
PCI version:
RFIC version: 17211721
DSP version: 06w14pb_07w39
PPM version: V 06.01
16-01-08
RM-217
(c) Nokia.
A
BT MCM version: 06cc-P9.1
Retu version: 32
Tahvo version: 53
Content Pack version: Content: a
V 06.01
16-01-08
RM-217
(c) Nokia.
Production serial number: KCP224493
Product code: 0521830
Module code: 0203166
Basic production code: 0537040
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 356437018224331
IMEI spare to net: 3A 65 34 07 81 22 34 03
IMEI SV to net: 33 65 34 07 81 22 34 13 F5
LOCK STATUS:
CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0
Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

I performed a self test as well. All passed

Well I went ahead and ordered the RPL. But tell me can this be resolved with the above method?