C6-00 rm-612 - Page 2 - GSM-Forum

kazel · 03-19-2011, 13:41

its the same as before. cant boot up at the near finish. i took the RM612 Product 597939. im from Philippines BTW.

kazel · 03-19-2011, 13:44

here is the message from Phoenix.

Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection
ERROR: Product recovery failed
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
Phone recovery completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified

And here is the error mesage

Flashing finalization failed. Do you like to retry the finalizing?

HRESULT 0x8421001f (-2078212065)

Firmware: Failed to switch phone to correct mode for fartorysettings using USB.

ProcyOne · 03-19-2011, 13:49

In connection window choose NO CONNECTION and in flashing tick DEAD USB and try again by Sw Reset.
B.R.
ProcyOne

U can download Your package in Phoenix - Tools - Data Package Download, it will download this missing Theodore... file if U tick Download optional files also...

kazel · 03-19-2011, 14:26

wew. Still No progress.

ProcyOne · 03-19-2011, 20:28

What does it mean no progress? Did U flash the phone? Was the process completely? Post log.
B.R.
ProcyOne

kazel · 03-19-2011, 21:49

yeah. its the same as before.same log i posted earlier

ProcyOne · 03-19-2011, 22:09

It looks like U have trouble with connection, click Sw Reset and then connect pohone into microUSB and press Power. U can have no drivers installed so try few times.
B.R.
ProcyOne

kazel · 03-20-2011, 06:52

I think there is no problem with connection. when i flash the x6 CFW it shows the boot screen. You know the nokia test mode right?. but when i flash the OFW C6 it doesnt show the nokia test mode. Just a blur screen then off.

GSMPAKHOST · 03-20-2011, 07:41

here is c6 rm-612 all files

http://forum.gsmhosting.com/vbb/7086305-post165.html

BR,

kazel · 03-20-2011, 11:12

sorry sir but i already have all the files i need.
Reviving my phone is the help i need. Thank you BTW

ProcyOne · 03-20-2011, 12:25

Did U flash files downloaded by Phoenix or by navifirm? Try flash the same version that was on the begining. Maybe U need to flash ENO file too.
B.R.
ProcyOne

kazel · 03-20-2011, 12:40

i tried both. but not with the ENO file. where can i find it. I tried using the RM-559 core file to flash. It boots up but only until the NOKIA logo then off. i flashed it again back to the RM-612 but it wont boot even the NOKIA logo wont appear.

kazel · 03-20-2011, 12:55

do you think it has something to do with any of the C6 hardware? Like in the 5800, it wont flash if its LCD is not Original.

ProcyOne · 03-20-2011, 13:33

ENO U can download via nafivirm i see. Flash as mcu. Try hard reset ( Left Shift + Space + Delete + Power). U can try to disassembyl phone and flash just self PCB.
B.R.
ProcyOne

BTW what was phone condition before flashing X6 files?

kazel · 03-20-2011, 15:51

OFW normal working. First time flash. no ENO file at navifirm. How to Flash PCB?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP Dead 5130 v5.00	N.Schmetz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	03-08-2011 04:51
5110 V5.30 AM29LV800BT Dejan 1.00 not read flash	vladwork1974	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	10-15-2001 05:36
Need 5130 V5.00 Partial Flash	N.Schmetz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	04-09-2001 19:19
WARNING !!! N5110, v5.30, N3210 v6.00	ico	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	11-25-2000 23:34
7110 v04.84 (07-04-00 year)	jonwillow	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-06-2000 16:56

03-19-2011, 13:41	#16 (permalink)
kazel Major Poster Join Date: Oct 2007 Posts: 41 Member: 620047 Status: Offline Thanks Meter: 1	its the same as before. cant boot up at the near finish. i took the RM612 Product 597939. im from Philippines BTW.

03-19-2011, 13:44	#17 (permalink)
kazel Major Poster Join Date: Oct 2007 Posts: 41 Member: 620047 Status: Offline Thanks Meter: 1	here is the message from Phoenix. Error 0x8401F121 communicating to phone. Unable to verify comm. Warning: Unable to communicate to product after flashing Scanning image files... ERROR: Unable to detect device 0x8401F145. Check USB connection ERROR: Product recovery failed Unable to set the phone to flash mode. Unable to flash. Starting to recover the phone Recoverying phone Initializing Scanning image files... ERROR: Unable to detect device 0x8401F145. Check USB connection ERROR: Product recovery failed Unable to set the phone to flash mode. Unable to flash. Starting to recover the phone Recoverying phone Initializing Scanning image files... ERROR: Unable to detect device 0x8401F145. Check USB connection ERROR: Product recovery failed Unable to set the phone to flash mode. Unable to flash. Starting to recover the phone Recoverying phone Initializing Scanning image files... ERROR: Unable to detect device 0x8401F145. Check USB connection ERROR: Product recovery failed Unable to set the phone to flash mode. Unable to flash. Starting to recover the phone Recoverying phone Initializing Scanning image files... Phone recovery completed. Waiting for phone to boot up Bootup successful Verifying communication to product (before flash finalizing) Communication verified And here is the error mesage Flashing finalization failed. Do you like to retry the finalizing? HRESULT 0x8421001f (-2078212065) Firmware: Failed to switch phone to correct mode for fartorysettings using USB.

03-19-2011, 13:49	#18 (permalink)
ProcyOne No Life Poster Join Date: Jun 2007 Location: Swansea, UK Age: 41 Posts: 719 Member: 523318 Status: Offline Thanks Meter: 268	In connection window choose NO CONNECTION and in flashing tick DEAD USB and try again by Sw Reset. B.R. ProcyOne U can download Your package in Phoenix - Tools - Data Package Download, it will download this missing Theodore... file if U tick Download optional files also...

03-19-2011, 14:26	#19 (permalink)
kazel Major Poster Join Date: Oct 2007 Posts: 41 Member: 620047 Status: Offline Thanks Meter: 1	wew. Still No progress.

03-19-2011, 20:28	#20 (permalink)
ProcyOne No Life Poster Join Date: Jun 2007 Location: Swansea, UK Age: 41 Posts: 719 Member: 523318 Status: Offline Thanks Meter: 268	What does it mean no progress? Did U flash the phone? Was the process completely? Post log. B.R. ProcyOne

03-19-2011, 21:49	#21 (permalink)
kazel Major Poster Join Date: Oct 2007 Posts: 41 Member: 620047 Status: Offline Thanks Meter: 1	yeah. its the same as before.same log i posted earlier

03-19-2011, 22:09	#22 (permalink)
ProcyOne No Life Poster Join Date: Jun 2007 Location: Swansea, UK Age: 41 Posts: 719 Member: 523318 Status: Offline Thanks Meter: 268	It looks like U have trouble with connection, click Sw Reset and then connect pohone into microUSB and press Power. U can have no drivers installed so try few times. B.R. ProcyOne

03-20-2011, 06:52	#23 (permalink)
kazel Major Poster Join Date: Oct 2007 Posts: 41 Member: 620047 Status: Offline Thanks Meter: 1	I think there is no problem with connection. when i flash the x6 CFW it shows the boot screen. You know the nokia test mode right?. but when i flash the OFW C6 it doesnt show the nokia test mode. Just a blur screen then off.

03-20-2011, 07:41	#24 (permalink)
GSMPAKHOST No Life Poster Join Date: Feb 2011 Location: Mother's Feet Age: 38 Posts: 667 Member: 1516950 Status: Offline Sonork: 100.1593505 Thanks Meter: 5,750	here is c6 rm-612 all files http://forum.gsmhosting.com/vbb/7086305-post165.html BR,

03-20-2011, 11:12	#25 (permalink)
kazel Major Poster Join Date: Oct 2007 Posts: 41 Member: 620047 Status: Offline Thanks Meter: 1	sorry sir but i already have all the files i need. Reviving my phone is the help i need. Thank you BTW

03-20-2011, 12:25	#26 (permalink)
ProcyOne No Life Poster Join Date: Jun 2007 Location: Swansea, UK Age: 41 Posts: 719 Member: 523318 Status: Offline Thanks Meter: 268	Did U flash files downloaded by Phoenix or by navifirm? Try flash the same version that was on the begining. Maybe U need to flash ENO file too. B.R. ProcyOne

03-20-2011, 12:40	#27 (permalink)
kazel Major Poster Join Date: Oct 2007 Posts: 41 Member: 620047 Status: Offline Thanks Meter: 1	i tried both. but not with the ENO file. where can i find it. I tried using the RM-559 core file to flash. It boots up but only until the NOKIA logo then off. i flashed it again back to the RM-612 but it wont boot even the NOKIA logo wont appear.

03-20-2011, 12:55	#28 (permalink)
kazel Major Poster Join Date: Oct 2007 Posts: 41 Member: 620047 Status: Offline Thanks Meter: 1	do you think it has something to do with any of the C6 hardware? Like in the 5800, it wont flash if its LCD is not Original.

03-20-2011, 13:33	#29 (permalink)
ProcyOne No Life Poster Join Date: Jun 2007 Location: Swansea, UK Age: 41 Posts: 719 Member: 523318 Status: Offline Thanks Meter: 268	ENO U can download via nafivirm i see. Flash as mcu. Try hard reset ( Left Shift + Space + Delete + Power). U can try to disassembyl phone and flash just self PCB. B.R. ProcyOne BTW what was phone condition before flashing X6 files?

03-20-2011, 15:51	#30 (permalink)
kazel Major Poster Join Date: Oct 2007 Posts: 41 Member: 620047 Status: Offline Thanks Meter: 1	OFW normal working. First time flash. no ENO file at navifirm. How to Flash PCB?