HELP!! Flash N70 using RM-36 Flash file! Can't reflash! - GSM-Forum

silence360 · 07-23-2006, 22:45

I am not sure why in the world I decided to reflash my phone when I just wanted to do a hard reset. But anyways, I flashed my phone last night, but I used the wrong flash file and now my phone shows as a Nokia 6680. I tried to reflash the phone back to the latest N70 firmware, but it won't let me.

Changing phone's operation mode failed.
Do you want to retry?
HRESULT 0x80043005 (-2147209211)
CMtcFN::SetCurrentMode, transition not allowed;MTCFN=0x80043005

I used this procedure.
http://nokia.dogtoe.com/

edryzmed · 07-24-2006, 03:01

wow, u used 6680 flash to flash ur N70? wat a downgrade for ur phone... Anyway, dun worry, the error u got is normal.. Just insert back ur sim card and let the phone get network signals like normal and plug into phoenix again and chage the mode from normal to rf inactive and back to normal.. quickly off the phone and take out sim card again and do reflashing again hopefully this time using n70 flash file eh?

silence360 · 07-24-2006, 06:39

I actually started messing with the phone and that is actually what I did. But now I have another problem, the flashing was basically at the end then my computer froze. So I restarted my computer and now I can't connect to the phone at all. I turn on the phone, but all I get is a blinking Nokia Logo. I try to scan for product in Phoenix, but it does not detect the phone, and serial number etc..So it won't flash. Is there anything I can do?

silence360 · 07-24-2006, 07:26

I keep reading people recommending this.

1) full erase

2) write mcu+ppm+pm

3) do restore full factory defaults

4) init sim locks

5) format user area

should do the trick !!!

But how do I do this? Can I do this with phoenix, do I need special hardware and more than Phoenix and my USB cable? My phone won't even turn on, it has a blinking screen and Phoenix can't detect it! I need help please!

miszko · 07-24-2006, 09:25

I have the same problem with n6630 (white screen). I have searching forum and only way to repair phone is go to service or friend who have a box like JAF.

Phoenix, first must detect the phone. Until phone not will be recognized, Phoniex will not start collecting information and start flashing.

Lucky, my friend have a JAF box and tommorow I will go to him.

Sorry 4 me english

ahmed · 07-24-2006, 09:36

use FBUS cable and flash with twister/hwk , dont flash PM file as yet

silence360 · 07-24-2006, 19:23

Ohh great, I have neither. Looks like this problem is going to cost me over 100 bux to fix. Well ****.

cell2cell · 03-25-2007, 13:31

l have a n70 with was flashed with rm70 file can l fix it with hwk anf if so how the phone is dead and will not flash l get product mismach

07-23-2006, 22:45	#1 (permalink)
silence360 Junior Member Join Date: May 2006 Posts: 14 Member: 283486 Status: Offline Thanks Meter: 0	HELP!! Flash N70 using RM-36 Flash file! Can't reflash! I am not sure why in the world I decided to reflash my phone when I just wanted to do a hard reset. But anyways, I flashed my phone last night, but I used the wrong flash file and now my phone shows as a Nokia 6680. I tried to reflash the phone back to the latest N70 firmware, but it won't let me. Changing phone's operation mode failed. Do you want to retry? HRESULT 0x80043005 (-2147209211) CMtcFN::SetCurrentMode, transition not allowed;MTCFN=0x80043005 I used this procedure. http://nokia.dogtoe.com/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RM-36 flashing error	8051	Federal One	0	05-14-2007 08:16
problem flashing N70 using phoenix 2006 (No Adl loader files found)	Nasoor	Nokia Base Band 5 ( BB-5 )	11	01-05-2007 00:57

07-24-2006, 03:01	#2 (permalink)
edryzmed Junior Member Join Date: Mar 2006 Location: Nokia Land Posts: 38 Member: 247864 Status: Offline Thanks Meter: 0	wow, u used 6680 flash to flash ur N70? wat a downgrade for ur phone... Anyway, dun worry, the error u got is normal.. Just insert back ur sim card and let the phone get network signals like normal and plug into phoenix again and chage the mode from normal to rf inactive and back to normal.. quickly off the phone and take out sim card again and do reflashing again hopefully this time using n70 flash file eh?

07-24-2006, 06:39	#3 (permalink)
silence360 Junior Member Join Date: May 2006 Posts: 14 Member: 283486 Status: Offline Thanks Meter: 0	I actually started messing with the phone and that is actually what I did. But now I have another problem, the flashing was basically at the end then my computer froze. So I restarted my computer and now I can't connect to the phone at all. I turn on the phone, but all I get is a blinking Nokia Logo. I try to scan for product in Phoenix, but it does not detect the phone, and serial number etc..So it won't flash. Is there anything I can do?

07-24-2006, 07:26	#4 (permalink)
silence360 Junior Member Join Date: May 2006 Posts: 14 Member: 283486 Status: Offline Thanks Meter: 0	I keep reading people recommending this. 1) full erase 2) write mcu+ppm+pm 3) do restore full factory defaults 4) init sim locks 5) format user area should do the trick !!! But how do I do this? Can I do this with phoenix, do I need special hardware and more than Phoenix and my USB cable? My phone won't even turn on, it has a blinking screen and Phoenix can't detect it! I need help please!

07-24-2006, 09:25	#5 (permalink)
miszko Crazy Poster Join Date: Jul 2006 Location: Poland Age: 41 Posts: 56 Member: 316613 Status: Offline Thanks Meter: 0	I have the same problem with n6630 (white screen). I have searching forum and only way to repair phone is go to service or friend who have a box like JAF. Phoenix, first must detect the phone. Until phone not will be recognized, Phoniex will not start collecting information and start flashing. Lucky, my friend have a JAF box and tommorow I will go to him. Sorry 4 me english

07-24-2006, 09:36	#6 (permalink)
ahmed No Life Poster Join Date: Feb 2001 Posts: 1,290 Member: 3279 Status: Offline Thanks Meter: 19	use FBUS cable and flash with twister/hwk , dont flash PM file as yet

07-24-2006, 19:23	#7 (permalink)
silence360 Junior Member Join Date: May 2006 Posts: 14 Member: 283486 Status: Offline Thanks Meter: 0	Ohh great, I have neither. Looks like this problem is going to cost me over 100 bux to fix. Well ****.

03-25-2007, 13:31	#8 (permalink)
cell2cell Freak Poster Join Date: Jun 2006 Posts: 264 Member: 299902 Status: Offline Thanks Meter: 20	l have a n70 with was flashed with rm70 file can l fix it with hwk anf if so how the phone is dead and will not flash l get product mismach