3110 imei goes 123456??? After sim lock repair - GSM-Forum

lovingazmee · 03-13-2009, 08:11

3110 IMEI GOES 123456??? AFTER SIM LOCK REPAIR I HAVE TAKEN BACKUP TRIED TO RESTORE ALL WAS OK BUT IMEI DIDNT GET BACK
NOW WHAT TO DO UB TEAM

Soft Version: V 06.60 Date: 21-05-08 Type: RM-237 (3110 CLASSIS) Pack: (c) Nokia.
Product code: 0544306
Original IMEI: 354161-02-********
Production serial: 7G1249059
HW Version: 2003
DSP Version: ICPR61_08w10
LCD Version:
APE ADSP Version:
SIMLock service: SIMLOCK SERVER VERSION 63 [040A08060118]
Profile bits: 0000000000000000
Simlock config: 2440700000000000
Invalid codes entered: 0 / 0
Block: 1; Lock: 1; State: Open; Data: FFFFFF
Block: 2; Lock: 1; State: Open; Data: FFFFFF
Block: 3; Lock: 1; State: Open; Data: FFFFFF
Block: 4; Lock: 1; State: Open; Data: FFFFFF
Block: 5; Lock: 1; State: Open; Data: FFFFFF
Block: 6; Lock: 1; State: Open; Data: FFFFFF
Block: 7; Lock: 1; State: Open; Data: FFFFFF
All locks are open.
Security code: 12345
--------------------------------------------------------------------------------
TBB5PatchUnlockThread 2.7.4.2047 finished at: 2009/03/13 11:08:45
Done.
TSelfUpdateThread 2.7.4.2047 started at: 2009/03/13 11:09:05
--------------------------------------------------------------------------------
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Connecting to server: Main
Receiving latest versions...
All available algos are up to date.
Current local filepack version: 5.11 is up to date.
Current local executable version: 2.7.4.2047 is up to date.
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
--------------------------------------------------------------------------------
TSelfUpdateThread 2.7.4.2047 finished at: 2009/03/13 11:09:09
Done.
TBB5SimlockRepairThread 2.7.4.2047 started at: 2009/03/13 11:09:23
--------------------------------------------------------------------------------
MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Input power: 4.66V OK.
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 1150010CEB177B56402C41698C7FFDA868601703
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
Power off mode set.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: RPL 0 kB
Speed: [3000k, 3250k, 3250k, 98k] Baud.
Supported Hardwares: [010C192101001101]
Input power: 4.66V OK.
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Boot Loader: RAP3Gv3_2nd.fg 15 kB
Version: 1.30.0
Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Max Flash Devices: 2
Flash ID 1: 0020881C - 0000 Rev: 6A21 Manufacturer: ST MSB: 00 SectorSize: 0x010000
Flash ID 2: FFFF0000 - 0000 Rev: 0000 Manufacturer: Unknown MSB: 00 SectorSize: 0x010000
Signature: 00000000000000000000000000000000
Flash Loader: RAP3Gv3_algo.fg 166 kB
Version: 1.31.0
Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Using RX2 flash.
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 1150010CEB177B56402C41698C7FFDA868601703
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
SecHash: C0E691EA16A7593A9BB28832D7312A39F7ED668D
Writing flash...
After MCU Flash Delay: 5000 msec.
Total time: 28,1 sec.
Switching from Local to Normal mode...
Normal mode set.
Power off mode set.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: RPL 13 kB
Speed: [3000k, 3250k, 3250k, 98k] Baud.
Supported Hardwares: [010C192101001101]
Input power: 4.64V OK.
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Boot Loader: RAP3Gv3_2nd.fg 15 kB
Version: 1.30.0
Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Max Flash Devices: 2
Flash ID 1: 0020881C - 0000 Rev: 6A21 Manufacturer: ST MSB: 00 SectorSize: 0x010000
Flash ID 2: FFFF0000 - 0000 Rev: 0000 Manufacturer: Unknown MSB: 00 SectorSize: 0x010000
Signature: 00000000000000000000000000000000
Flash Loader: RAP3Gv3_algo.fg 166 kB
Version: 1.31.0
Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Using RX2 flash.
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 1150010CEB177B56402C41698C7FFDA868601703
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
SecHash: C0E691EA16A7593A9BB28832D7312A39F7ED668D
Writing flash...
After MCU Flash Delay: 5000 msec.
Total time: 28,5 sec.
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Auto power-on mode set.
PRODUCTCODE set
PSN set
HWID set
TBB5PatchUnlockThread 2.7.4.2047 started at: 2009/03/13 11:11:27
--------------------------------------------------------------------------------
MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.42, and up to date.
MCU BB5NoTP Version: 1.042, and up to date.
SMCU BB5NoTP Version: 1.16, and up to date.
Reading Info...
Soft Version: V 06.60 Date: 21-05-08 Type: RM-237 (3110 CLASSIS) Pack: (c) Nokia.
Product code: 0544306
Original IMEI: 123456-10-********
Production serial: 7G1249059
HW Version: 2003
DSP Version: ICPR61_08w10
LCD Version:
APE ADSP Version:
SIMLock service: SIMLOCK SERVER VERSION 63 [040A08060118]
Profile bits: 0000000000000000
Simlock config: 2440700000000000
Invalid codes entered: 0 / 0
Block: 1; Lock: 1; State: Open; Data: FFFFFF
Block: 2; Lock: 1; State: Open; Data: FFFFFF
Block: 3; Lock: 1; State: Open; Data: FFFFFF
Block: 4; Lock: 1; State: Open; Data: FFFFFF
Block: 5; Lock: 1; State: Open; Data: FFFFFF
Block: 6; Lock: 1; State: Open; Data: FFFFFF
Block: 7; Lock: 1; State: Open; Data: FFFFFF
All locks are open.
Security code: 12345
Reading PM...
Input power: 4.66V OK.
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 1150010CEB177B56402C41698C7FFDA868601703
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: PatchUnlock 0 kB
Speed: [3000k, 3250k, 3250k, 98k] Baud.
Supported Hardwares: [010C192101001101]
Input power: 4.66V OK.
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Boot Loader: RAP3Gv3_2nd.fg 15 kB
Version: 1.30.0
Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 1150010CEB177B56402C41698C7FFDA868601703
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
Total time: 10,2 sec.
Initializing phone...
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Phone powered.
Reading Info...
Soft Version: V 06.60 Date: 21-05-08 Type: RM-237 (3110 CLASSIS) Pack: (c) Nokia.
Product code: 0544306
Original IMEI: 123456-10-********
Production serial: 7G1249059
HW Version: 2003
DSP Version: ICPR61_08w10
LCD Version:
APE ADSP Version:
SIMLock service: SIMLOCK SERVER VERSION 63 [040A08060118]
Profile bits: 0000000000000000
Simlock config: 2440700000000000
Invalid codes entered: 0 / 0
Block: 1; Lock: 1; State: Open; Data: FFFFFF
Block: 2; Lock: 1; State: Open; Data: FFFFFF
Block: 3; Lock: 1; State: Open; Data: FFFFFF
Block: 4; Lock: 1; State: Open; Data: FFFFFF
Block: 5; Lock: 1; State: Open; Data: FFFFFF
Block: 6; Lock: 1; State: Open; Data: FFFFFF
Block: 7; Lock: 1; State: Open; Data: FFFFFF
All locks are open.
Security code: 12345
Writing PM...
Reading Info...
Soft Version: V 06.60 Date: 21-05-08 Type: RM-237 (3110 CLASSIS) Pack: (c) Nokia.
Product code: 0544306
Original IMEI: 123456-10-********
Production serial: 7G1249059
HW Version: 2003
DSP Version: ICPR61_08w10
LCD Version:
APE ADSP Version:
SIMLock service: SIMLOCK SERVER VERSION 63 [040A08060118]
Profile bits: 8000000000000000
Simlock config: 0010100000000000
Invalid codes entered: 0 / 0
Block: 1; Lock: 1; State: Open; Data: 00101F
All locks are open.
Security code: 12345
--------------------------------------------------------------------------------
TBB5PatchUnlockThread 2.7.4.2047 finished at: 2009/03/13 11:13:15
--------------------------------------------------------------------------------
TBB5SimlockRepairThread 2.7.4.2047 finished at: 2009/03/13 11:13:15
Done.

**************************************************

RESTORATION PROCESS

--------------------------------------------------------------------------------
MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Input power: 4.66V OK.
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 1150010CEB177B56402C41698C7FFDA868601703
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
Restoring certificates...
CMT.NPC section parsed
CMT.VARIANT section parsed
CMT.CCC section parsed
CMT.HWC section parsed
CMT.RnD section parsed
CMT.SIMLOCK section parsed
CMT.SIMLOCK_KEY section not found
CMT.SUPERDONGLE_KEY section not found
CMT.CMLA_KEY section not found
CMT.WMDRM_PD section not found
APE.NPC section not found
APE.VARIANT section not found
APE.CCC section not found
APE.HWC section not found
APE.RnD section not found
Power off mode set.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: RPL 13 kB
Speed: [3000k, 3250k, 3250k, 98k] Baud.
Supported Hardwares: [010C192101001101]
Input power: 4.66V OK.
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Boot Loader: RAP3Gv3_2nd.fg 15 kB
Version: 1.30.0
Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Max Flash Devices: 2
Flash ID 1: 0020881C - 0000 Rev: 6A21 Manufacturer: ST MSB: 00 SectorSize: 0x010000
Flash ID 2: FFFF0000 - 0000 Rev: 0000 Manufacturer: Unknown MSB: 00 SectorSize: 0x010000
Signature: 00000000000000000000000000000000
Flash Loader: RAP3Gv3_algo.fg 166 kB
Version: 1.31.0
Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Using RX2 flash.
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000353
Public ID: 1150010CEB177B56402C41698C7FFDA868601703
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
SecHash: C0E691EA16A7593A9BB28832D7312A39F7ED668D
Writing flash...
Flashing section: [00] NPC
Flashing section: [00] VARIANT
Flashing section: [00] CCC
Flashing section: [00] HWC
Flashing section: [00] R&D
After MCU Flash Delay: 5000 msec.
Total time: 28,6 sec.
Output power at Line1 3.95V is in range of: 4.00V ±10.0%
Auto power-on mode set.
PRODUCTCODE set
PSN set
HWID set
Reading Info...
Soft Version: V 06.60 Date: 21-05-08 Type: RM-237 (3110 CLASSIS) Pack: (c) Nokia.
Product code: 0544306
Original IMEI: 123456-10-********
Production serial: 7G1249059
HW Version: 2003
DSP Version: ICPR61_08w10
LCD Version:
APE ADSP Version:
SIMLock service: SIMLOCK SERVER VERSION 63 [040A08060118]
Profile bits: 8000000000000000
Simlock config: 0010100000000000
Invalid codes entered: 0 / 0
Block: 1; Lock: 1; State: Open; Data: 00101F
All locks are open.
Security code: 12345
Backup security file C:\Uni\Files\Nokia\BB5\BACKUP\12345610654321?_BACK UP.PM not found
--------------------------------------------------------------------------------
TBB5RestoreCertThread 2.7.4.2047 finished at: 2009/03/13 11:14:20
Done.

NOW WHAT TO DO UB TEAM
WBR
AZEEM

masum_sohel · 03-13-2009, 08:28

write new rpl bro.it will be ok

nishaon · 03-13-2009, 08:33

Its too funny to write new RPL
write backup RPL to solve this.

raezak · 03-13-2009, 08:34

only ask rpl can fix your problem

br

lovingazmee · 03-13-2009, 09:49

Quote:

Originally Posted by nishaon

Its too funny to write new RPL
write backup RPL to solve this.

iI HAVE TAKEN CERT BACKUP ALREADY BUT WHEN RESTORE IT ALWALS OK BUT IMEI 12346?????? IS UB CERT BACKUP IS NOT WORKING UB TEAM

CMT.NPC section parsed
CMT.VARIANT section parsed
CMT.CCC section parsed
CMT.HWC section parsed
CMT.RnD section parsed
CMT.SIMLOCK section parsed

WBR
AZEEM

Ja\/\/aD · 03-13-2009, 14:19

before doing imei is 100% ok ?
please try to erase phone
flash with latest firmware version
write backup
and post here result

sam081284 · 10-22-2009, 16:36

where and how to write rpl plz help 3110c urgent

jjogola · 10-25-2009, 04:59

Quote:

Originally Posted by RIZWANJAT

..::Brother to go to C:/uni and search your imei and found so to click restore cert so your problem solved not backup so to buy new rpl but this time Ub box BB5 rpl atm low so to buy new rpl another server(ask2rpl) ok::..
Br
UB TEAM

Hi?

I have 2 phones (3120C and 5220) with same problem. They had bad simlock data and were Contact Service, so I did certificate backup, then repaired simlock, and CS was repaired, but the IMEI changed to 12345.....?. When I want to write back the cert, it says it cannot find the backup 123456....?. The backup was saved with the correct IMEI before the procedure, but now the certificate cannot be 'found'. What is the solution to this?

Regards

shoktong · 10-25-2009, 05:33

Quote:

Originally Posted by lovingazmee

iI HAVE TAKEN CERT BACKUP ALREADY BUT WHEN RESTORE IT ALWALS OK BUT IMEI 12346?????? IS UB CERT BACKUP IS NOT WORKING UB TEAM

CMT.NPC section parsed
CMT.VARIANT section parsed
CMT.CCC section parsed
CMT.HWC section parsed
CMT.RnD section parsed
CMT.SIMLOCK section parsed

WBR
AZEEM

Quote:

Originally Posted by jjogola

Hi?

I have 2 phones (3120C and 5220) with same problem. They had bad simlock data and were Contact Service, so I did certificate backup, then repaired simlock, and CS was repaired, but the IMEI changed to 12345.....?. When I want to write back the cert, it says it cannot find the backup 123456....?. The backup was saved with the correct IMEI before the procedure, but now the certificate cannot be 'found'. What is the solution to this?

Regards

the buck up is in c/uni/files/nokia/bb5/buck up folder
look in uni log the time and date of repair simlock
use jaf to restore using crt tool put check on wrt rpl and plain rpl
use the restore file in buck up folder sure it will bring back the serial
hope it help will both of you

br
shoktong

sky_finder · 10-25-2009, 13:39

Just put 308 backup which U took.

It will be 100% ok.

It will be imei_name.RPL file.

Hope will help U.

Joyax · 10-26-2009, 05:24

if you have your back-up then try to restore it. or else look at the public i.d. no..back-up then use other tool and write it. sometimes ub fail to write back back-up. hope your prblm solved.

CONCORDIA GSM · 10-26-2009, 05:27

Quote:

Originally Posted by Joyax

if you have your back-up then try to restore it. or else look at the public i.d. no..back-up then use other tool and write it. sometimes ub fail to write back back-up. hope your prblm solved.

Would you please explain some more clear ???

lilong_lee · 10-26-2009, 06:05

this issue we can solve by write rpl only used mx key by lim hape to write that .........

xim360 · 10-26-2009, 06:12

1st try to use other boxes SX4 option if u written NPC Insh***** it will lead u otherwise ask rpl can fix your problem

sam081284 · 10-27-2009, 10:05

where can i get rpl & which box good to write it

http://forum.gsmhosting.com/ubb/confused.gif

10-26-2009, 06:12	#14 (permalink)
xim360 Banned Join Date: Feb 2008 Location: GSM Nowshera Posts: 1,168 Member: 713374 Status: Offline Sonork: 100.1597179 Thanks Meter: 223	Use Other Boxes that may lead u 1st try to use other boxes SX4 option if u written NPC Insh***** it will lead u otherwise ask rpl can fix your problem

10-27-2009, 10:05	#15 (permalink)
sam081284 Freak Poster Join Date: Sep 2007 Location: India Posts: 121 Member: 579916 Status: Offline Thanks Meter: 10	imei where can i get rpl & which box good to write it http://forum.gsmhosting.com/ubb/confused.gif

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
5800 lcd goes blink after keypad lock	Mansoor	Universalbox	20	02-19-2010 13:04
3110 c goes off after 10 secs	telecomindia	JAF No Tp Unlocker by Cinek	4	10-19-2009 04:19
y imei goes 123456781234? after clicking on sp repair	lovingazmee	Universalbox	3	12-23-2008 13:40
imei12345 after sim lock repair	zandoo	Universalbox	3	12-09-2008 18:20

03-13-2009, 08:28	#2 (permalink)
masum_sohel No Life Poster Join Date: Sep 2008 Location: BANGLADESH Posts: 1,676 Member: 852543 Status: Offline Thanks Meter: 2,338	write new rpl bro.it will be ok

03-13-2009, 08:33	#3 (permalink)
nishaon No Life Poster Join Date: Jan 2006 Location: Deep Blue G.S.M. Posts: 2,369 Member: 225229 Status: Offline Thanks Meter: 90	Its too funny to write new RPL write backup RPL to solve this.

03-13-2009, 08:34	#4 (permalink)
raezak No Life Poster Join Date: Apr 2006 Location: Badong's Junkshop Posts: 2,749 Member: 260632 Status: Offline Thanks Meter: 639	only ask rpl can fix your problem br

03-13-2009, 14:19	#6 (permalink)
Ja\/\/aD No Life Poster $Ja\/\/aD's Avatar$ Join Date: Sep 2004 Location: Aunlock Age: 43 Posts: 18,049 Member: 80354 Status: Offline Sonork: 100.1577575 Thanks Meter: 21,659	before doing imei is 100% ok ? please try to erase phone flash with latest firmware version write backup and post here result

10-22-2009, 16:36	#7 (permalink)
sam081284 Freak Poster Join Date: Sep 2007 Location: India Posts: 121 Member: 579916 Status: Offline Thanks Meter: 10	where and how to write rpl plz help 3110c urgent

10-25-2009, 13:39	#10 (permalink)
sky_finder No Life Poster Join Date: May 2009 Location: Srilanka Posts: 1,892 Member: 1026122 Status: Offline Sonork: 100.1640842 Thanks Meter: 184	Just put 308 backup which U took. It will be 100% ok. It will be imei_name.RPL file. Hope will help U.

10-26-2009, 05:24	#11 (permalink)
Joyax No Life Poster Join Date: Jan 2008 Location: Surigao del Norte,Phil. Age: 50 Posts: 738 Member: 679678 Status: Offline Thanks Meter: 72	if you have your back-up then try to restore it. or else look at the public i.d. no..back-up then use other tool and write it. sometimes ub fail to write back back-up. hope your prblm solved.

10-26-2009, 06:05	#13 (permalink)
lilong_lee No Life Poster Join Date: Jul 2009 Location: philippines now here in U.A.E Age: 38 Posts: 2,852 Member: 1070665 Status: Offline Sonork: 100.1636802 Thanks Meter: 572	this issue we can solve by write rpl only used mx key by lim hape to write that .........