N95 8gb unlocking problem!!!

[med_ion]

My problem is, that i can't unlock n95 8gb, no local mode with adaptor (tried with n95 & n95 8gb jaf cable). the adapter is working fine with 5310. without adapter the phone can set to local mode (with original n95 8gb jaf cable) but when i try too read certs, always giving error Terminated with error: 000100A6.000100A8.Probably wrong cable [0001107A].00011168.00011176.000115E0

any tips, what i m doing wrong? the resistors in both cable are good.

[Rezn]

Originally Posted by med_ion

My problem is, that i can't unlock n95 8gb, no local mode with adaptor (tried with n95 & n95 8gb jaf cable). the adapter is working fine with 5310. without adapter the phone can set to local mode (with original n95 8gb jaf cable) but when i try too read certs, always giving error Terminated with error: 000100A6.000100A8.Probably wrong cable [0001107A].00011168.00011176.000115E0

any tips, what i m doing wrong? the resistors in both cable are good.

...not adapter... MODIFIED adapter

[great4nara]

Modified your adapter..

http:///vbb/...d.php?t=526233

[MobilesDoctor]

Originally Posted by med_ion

My problem is, that i can't unlock n95 8gb, no local mode with adaptor (tried with n95 & n95 8gb jaf cable). the adapter is working fine with 5310. without adapter the phone can set to local mode (with original n95 8gb jaf cable) but when i try too read certs, always giving error Terminated with error: 000100A6.000100A8.Probably wrong cable [0001107A].00011168.00011176.000115E0

any tips, what i m doing wrong? the resistors in both cable are good.

Disable Rx2 and Modified Your Cable


Regards
Faisal

[dr.danielman]

I disabled rx 2 , i have good modified adapter, but still not working.
Terminated with error: No available bootloader for this ID, probably bad cable

[MobilesDoctor]

Originally Posted by dr.danielman

I disabled rx 2 , i have good modified adapter, but still not working.
Terminated with error: No available bootloader for this ID, probably bad cable

I think its Cable problem try to change You cable and Use 7 pin cable


Regards
Faisal

[med_ion]

Half of my problems is solved by changing 7.5k resitor to 10k. now local mode but another error ;(
TBB5OnlineUnlockThread started at: 2008.04.19 19:01:04
--------------------------------------------------------------------------------
MCU Nokia Version: 1.124, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Initializing phone...
Output power at Line1 3,95V is in range of: 4,00V ±10,0%
Phone powered.
Reading Info...
MCU Version: V 06wk41v46.1 Date: 13-11-07 Type: RM-320 (Unknown) Additional_1: (c) Nokia
PPM Version: V 06wk41v46.1 Date: 13-11-07 Type: RM-320 (Unknown) Pack: (c) Nokia
Product code: ******xx
Original IMEI: ******xx
Production serial: ******xx
HW Version: 4130
DSP Version: mc_3131_ICPR62_2007w44
LCD Version:
APE ADSP Version: 256
SIMLock service: SIMLOCK SERVER [010000060C08]
Invalid codes entered: 0
Block: 1; Lock: 1; State: Closed; Data: 23415F
Block: 2; Lock: 1; State: Closed; Data: 23415F
Input power: 4,61V OK.
Output power at Line1 3,95V is in range of: 4,00V ±10,0%
APE Asic ID: 24200705
APE Asic Mode ID: 00
APE Public ID: 33DF141C16C4A0C3F64EC09F871D0584926E88F3
APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000
Asic ID: 000000010000022600010006400C192101021103
EM Asic ID: 00000295
EM Asic ID: 00000B22
Public ID: 13300118E48D005815DE448915AB0FC6B8C146D6
Asic Mode ID: 00
Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: ReadKeys 0 kB
Speed: [3000k, 3250k, 3250k, 98k] Baud.
Supported Hardwares: [400C192101021103]
Supported APE Hardwares: [24200705]
Input power: 4,59V OK.
Output power at Line1 3,95V is in range of: 4,00V ±10,0%
Boot Loader: RAPIDOv11_2nd.fg 15 kB
Version: 1.30.0
Supported Hardwares: [0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105]
Max Flash Devices: 1
Flash ID 1: 00010035 - 0000 Rev: 6921 Manufacturer: AMD MSB: 00 SectorSize: 0x010000
Signature: 00000000000000000000000000000000
Flash Loader: RAPIDOv11_algo.fg 186 kB
Version: 1.31.0
Supported Hardwares: [0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105]
APE Boot Loader: omap2420_m1_2nd.fg 31 kB
Version: 1.37.0
Supported APE Hardwares: [24100701, 24100702, 24200703, 24200704, 24200705]
Max Flash Devices: 1
Flash ID 1: 00EC0040 - 0022 Rev: 0000 Manufacturer: Samsung MSB: 00 SectorSize: 0x010000
Signature: 55555555555555555555555555555555
APE Flash Loader: teflon_sam_nand_xsr151_m1.fg 182 kB
Version: 1.50.0
Supported APE Hardwares: [24100701, 24100702, 24200703, 24200704, 24200705]
Reading CMT Main section
Reading CMT NPC section
Reading CMT VARIANT section
Reading CMT CCC section
Reading CMT HWC section
Reading APE Main section
Reading APE NPC section
Reading APE VARIANT section
Reading APE CCC section
Reading APE HWC section
APE Asic ID: 24200705
APE Asic Mode ID: 00
APE Public ID: 33DF141C16C4A0C3F64EC09F871D0584926E88F3
APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000
Asic ID: 000000010000022600010006400C192101021103
EM Asic ID: 00000295
EM Asic ID: 00000B22
Public ID: 13300118E48D005815DE448915AB0FC6B8C146D6
Asic Mode ID: 00
Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
After MCU Flash Delay: 5000 msec.
Total time: 46,8 sec.
Connecting to server: US2
Credits: ***
--------------------------------------------------------------------------------
TBB5OnlineUnlockThread finished at: 2008.04.19 19:03:03

Terminated with error: Response from server: This phone cannot be unlocked! [00000880].00029114
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box [UBP3OAY6]

[stefan_162]

and whats mean -- this phone cannot be unlocked --

[guedes666]

until now yes, but lets wait for new updates i see that 70% of phones are unlocked witout testpoint, UB team is working in the last 30%, so lets pray and wait for news updates.

greet job from UB TEAM

[MobilesDoctor]

Just wait For next comming updates we will add this version too

Regards
Faisal

[Rezn]

Originally Posted by MobileDoctor's

Just wait For next comming updates we will add this version too

Regards
Faisal

Thanks, but firstly we need to fix bugz like n95 *rm159 flashing

[..::: Naveed :::..]

Why don't you tell us what exact version are supported for unlock.

many people have lost their credits
because some versions are supported and some are not we must know before unlocking that this version is supported or no

Br
Naveed

[essojay]

i dont think your credit is deducted if phone "cannot be unlocked" ...version not yet supported.

bR