N95 RM159 died during usb flash, cannot flash FBUS

[Rezn]

TBB5FlashPhoneThread started at: 2008-04-18 12:57:01
--------------------------------------------------------------------------------
MCU Nokia Version: 1.124, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Flashing file:
BB5 [XSR 1.5] MCU File: RM-159_12.0.013_PR.C0R 61 779 kB
Speed: [51k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103]
Supported APE Hardwares: [24200705]
Input power: 4,64V OK.
Output power at Line1 3,93V is in range of: 4,00V ±10,0%
Boot Loader: RAPIDOv1_2nd.fg 15 kB
Version: 1.15.7
Supported Hardwares: [0003192101001003, 000C192101001003, 0003192101001103, 000C192101001103, 4003192101001103, 400C192101001103, 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101011105, 400C192101011105]
Max Flash Devices: 1
Flash ID 1: 00010035 - 0000 Rev: 6921 Manufacturer: AMD MSB: 00 SectorSize: 0x020000
Signature: 00000000000000000000000000000000
APE Asic ID: 24200705
APE Asic Mode ID: 00
APE Public ID: B3DEA8E13A44C4ED671E2CEB34F9C2AE5240C7BB
APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000
Asic ID: 000000010000022600010006400C192101011103
EM Asic ID: 00000295
EM Asic ID: 00000B22
Public ID: 15900102B254005872FC89D1CA9B654871AE7E3D
Asic Mode ID: 00
Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: F2C6EBADC86E6189
--------------------------------------------------------------------------------
TBB5FlashPhoneThread finished at: 2008-04-18 12:57:18
Terminated with error: No available flashloader for this HW/Flash ID [000110EA].00011166.00011176.000115E0
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box

[::.imeimate.::]

are u using 7pin cable ?

[Rezn]

Originally Posted by ::.imeimate.::

are u using 7pin cable ?

yes but think its new problem, when unlocking with bb5box noticed the spansion chip inside is slightly smaller. 3 local shops here same problem .. Nokia have put new chip is most likely

[Rezn]

Originally Posted by Rezn

TBB5FlashPhoneThread started at: 2008-04-18 12:57:01
--------------------------------------------------------------------------------
MCU Nokia Version: 1.124, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Flashing file:
BB5 [XSR 1.5] MCU File: RM-159_12.0.013_PR.C0R 61 779 kB
Speed: [51k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103]
Supported APE Hardwares: [24200705]
Input power: 4,64V OK.
Output power at Line1 3,93V is in range of: 4,00V ±10,0%
Boot Loader: RAPIDOv1_2nd.fg 15 kB
Version: 1.15.7
Supported Hardwares: [0003192101001003, 000C192101001003, 0003192101001103, 000C192101001103, 4003192101001103, 400C192101001103, 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101011105, 400C192101011105]
Max Flash Devices: 1
Flash ID 1: 00010035 - 0000 Rev: 6921 Manufacturer: AMD MSB: 00 SectorSize: 0x020000
Signature: 00000000000000000000000000000000
APE Asic ID: 24200705
APE Asic Mode ID: 00
APE Public ID: B3DEA8E13A44C4ED671E2CEB34F9C2AE5240C7BB
APE Hash: BA8710A7E1CD5A2909B9A875DB27AA2400000000
Asic ID: 000000010000022600010006400C192101011103
EM Asic ID: 00000295
EM Asic ID: 00000B22
Public ID: 15900102B254005872FC89D1CA9B654871AE7E3D
Asic Mode ID: 00
Hash: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: F2C6EBADC86E6189
--------------------------------------------------------------------------------
TBB5FlashPhoneThread finished at: 2008-04-18 12:57:18
Terminated with error: No available flashloader for this HW/Flash ID [000110EA].00011166.00011176.000115E0
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->Universal Box

PLEASE UB TEAM LOOK INTO THIS. URGENT I HAVE 1PCS BUT ALL THE LOCAL SHOPS ARE STARTING TO STACK UP MANY PIECES WITH SAME PROBLEM.

[Jhay-r]

sir, its not only ub is experiencing problem with this chips....

its just the loaders...

and no box actually updated to have this loaders.....

if you have or know someone that uses original fps-10, loaders are already updated....

as to other 3rd party boxes, nothing is to avail...

wbr.:

[Rezn]

Originally Posted by Jhay-r

sir, its not only ub is experiencing problem with this chips....

its just the loaders...

and no box actually updated to have this loaders.....

if you have or know someone that uses original fps-10, loaders are already updated....

as to other 3rd party boxes, nothing is to avail...

wbr.:

Thanks, yes ..so we need updated loaders please UB team