Howto unlock F2300 with lg_gsm - GSM-Forum

twisterfan · 02-13-2006, 16:01

Hi

How do i unlock a LG F2300 using the lg_gsm module.

What cable ?

How ? With battery, without battery, power on/off ?

I read somewhere else that i need a C2200 adaptor and i have this but do i just plug the cable called "IP-HWK 24 PIN" into the C2200 and then connect this to the phone and the C2200 into the twisterbox ?

Have tried alot but when i press boot it just greys out for a second and then it returns. No text in the text windows ?

Good advice is welcome

Twisterfan

hamzaa · 02-14-2006, 08:54

you need to get the hwk-24 pin cable.connect without battery and click on boot,then on unlock .

twisterfan · 02-14-2006, 12:44

Quote:

Originally Posted by hamzaa

you need to get the hwk-24 pin cable.connect without battery and click on boot,then on unlock .

Ok, thanks.

I have the 24 Pin HWK cable so then it should be pretty forward ..

I also have a C2200 adaptor cable and read somewhere that i might need that, can you say for sure that i just need to attach the HWK-24 pin cable directly to the twisterflasher and the phone..

Twisterfan

anna · 02-14-2006, 13:26

Quote:

Originally Posted by twisterfan

Ok, thanks.
I have the 24 Pin HWK cable so then it should be pretty forward ..
I also have a C2200 adaptor cable and read somewhere that i might need that, can you say for sure that i just need to attach the HWK-24 pin cable directly to the twisterflasher and the phone..
Twisterfan

cable directly to box.
phone off
choose model
boot
unlock, program will save backup (in second)
phone unlocked in less than a second

twisterfan · 02-14-2006, 22:59

Quote:

Originally Posted by anna

cable directly to box.
phone off
choose model
boot
unlock, program will save backup (in second)
phone unlocked in less than a second

Hi

Did exactly as you said but it wont work. When pressing the boot button it greys out for a second and then it just goes blue again and the unlock button is greyed out all the time.

I suspect that the cable might be faulty.

Does anyone have a schematic for the HWK 24 pin LG cable so that i can test if it is wired allright. It seems that the only component that is inside my cable is a 1N4007 and then offcourse some wires

Twisterfan

hamzaa · 02-15-2006, 08:58

i think you should just buy one.i tried making one myself but had alot of probs.attached is schematic of the cable

XisiX · 02-15-2006, 12:36

Quote:

Originally Posted by hamzaa

i think you should just buy one.i tried making one myself but had alot of probs.attached is schematic of the cable

Just follow shematic, and there should be no problems - tested, even with 1N4007 instead of 1N4001

e2nak · 02-15-2006, 13:57

diode is use only for protection and as gate any silicon diode will suffice or even a small signal diode. u can also use in4148 will do as long as u do it with correct polarity.........

twisterfan · 02-16-2006, 14:30

Tested the cable today and found no errors when compared to the schematic posted in this thread.

Must be phone that is faulty in some way since it will not respond to the booting.

Tried it both with and without battery attached but nothing works. If i attach cable with battery on the phone it says "Charging" on the display, if it is not attached it does not say charging but still it wont boot.

Tried both the C version and the B version of the program but could not find the A version but i suspect that it wont make any change.

Twisterfan

hamzaa · 02-17-2006, 08:47

@twisterfan
thats why i suggested buy the cable so you have no doubts.i-phone has the cable for a about $5.

twisterfan · 02-17-2006, 14:51

Quote:

Originally Posted by hamzaa

@twisterfan
thats why i suggested buy the cable so you have no doubts.i-phone has the cable for a about $5.

HI

But my cable IS one that i bought.

If i buy a cable and even test it with an ohm'meter and find that the connections are like the schematic, then what should buying another cable do ?

Twisterfan

::gsmcoder:: · 11-20-2007, 09:48

sure ur charging port is not faulty?

***THE CLASH*** · 11-20-2007, 22:29

And 23 months later, i seem to think Mr twisterfan has long since forgot about this mobile.....

mohmohsah · 04-26-2009, 19:39

i found soluation just change baud rate to 115200 then boot then unlock then thanks for ***

02-13-2006, 16:01	#1 (permalink)
twisterfan No Life Poster Join Date: Feb 2004 Age: 48 Posts: 1,308 Member: 53791 Status: Offline Thanks Meter: 17	Howto unlock F2300 with lg_gsm Hi How do i unlock a LG F2300 using the lg_gsm module. What cable ? How ? With battery, without battery, power on/off ? I read somewhere else that i need a C2200 adaptor and i have this but do i just plug the cable called "IP-HWK 24 PIN" into the C2200 and then connect this to the phone and the C2200 into the twisterbox ? Have tried alot but when i press boot it just greys out for a second and then it returns. No text in the text windows ? Good advice is welcome Twisterfan

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
how to unlock f2300	MOBIL CLINIC	FuriousGold	0	02-13-2009 09:05
I need your HELP with LG_GSM	ab1009	HWK	12	04-17-2006 15:53
can i unlock LG F2300 with Furious?	sewger	FuriouS II	2	09-25-2005 15:46
Howto unlock T720(i) with Patriot 2.0?	Falck	Motorola P2k	1	04-04-2004 11:48
HowTo Flash 3350 with Dejan105	j2000	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	9	03-06-2002 14:31

02-14-2006, 08:54	#2 (permalink)
hamzaa Freak Poster Join Date: Oct 2004 Age: 42 Posts: 487 Member: 84694 Status: Offline Thanks Meter: 9	you need to get the hwk-24 pin cable.connect without battery and click on boot,then on unlock .

02-15-2006, 13:57	#8 (permalink)
e2nak No Life Poster Join Date: Feb 2004 Age: 84 Posts: 611 Member: 53556 Status: Offline Thanks Meter: 1	diode is use only for protection and as gate any silicon diode will suffice or even a small signal diode. u can also use in4148 will do as long as u do it with correct polarity.........

02-16-2006, 14:30	#9 (permalink)
twisterfan No Life Poster Join Date: Feb 2004 Age: 48 Posts: 1,308 Member: 53791 Status: Offline Thanks Meter: 17	Tested the cable today and found no errors when compared to the schematic posted in this thread. Must be phone that is faulty in some way since it will not respond to the booting. Tried it both with and without battery attached but nothing works. If i attach cable with battery on the phone it says "Charging" on the display, if it is not attached it does not say charging but still it wont boot. Tried both the C version and the B version of the program but could not find the A version but i suspect that it wont make any change. Twisterfan

02-17-2006, 08:47	#10 (permalink)
hamzaa Freak Poster Join Date: Oct 2004 Age: 42 Posts: 487 Member: 84694 Status: Offline Thanks Meter: 9	@twisterfan thats why i suggested buy the cable so you have no doubts.i-phone has the cable for a about $5.

11-20-2007, 09:48	#12 (permalink)
::gsmcoder:: Cheater -Don't Deal with him- Join Date: Aug 2005 Location: /%%temp%%.;adb Posts: 3,652 Member: 172434 Status: Offline Sonork: 100.161280 Thanks Meter: 577	sure ur charging port is not faulty?

11-20-2007, 22:29	#13 (permalink)
*THE CLASH* Super Moderator Join Date: Aug 2005 Location: UK.... Age: 57 Posts: 6,030 Member: 173077 Status: Offline Sonork: 100.1594293 Thanks Meter: 2,786	And 23 months later, i seem to think Mr twisterfan has long since forgot about this mobile.....

04-26-2009, 19:39	#14 (permalink)
mohmohsah Freak Poster Join Date: Mar 2005 Age: 60 Posts: 164 Member: 131801 Status: Offline Thanks Meter: 5	i found soluation just change baud rate to 115200 then boot then unlock then thanks for ***