mr GSMMUNNA plz help me in samsung :( - GSM-Forum

black snake · 05-28-2008, 17:34

i cant repair my U600B imei

Using MSL S/N: R9XQ307003K
1st:
1st Boot Ok, McuId: 000200A3, Rom: 000200A3, 6-1.1 (Trident HPE)
2nd Boot Ok, McuId: 000200A3, Rom: 000200A3, 4-1.1
Fll Boot Ok, Vers: 5.13, fl_sceptrehp_sgh_hw1_v24_s07_m01_1.sre
Flash1: Fl_Id: 00EC0000_22FD0000 - Samsung KBJ17KC00M-B
Flash2: Fl_Id: 00EC0000_00340000 - Samsung KBH1xPE00M-N 1G
Baud Rate Set: 460800 bps
Read Done, St: 0x20000000, 65536 byte(s), Time: 00:01, 0
Flashing NOR part...
Write Done, 65552 byte(s), Time: 00:03
Phone Must be with Battery and Powered On !
MSL Repair Failed: Cannot Store Data
Phone Must be with Battery and Powered On !
MSL : Active
MSL : Bypass Failed
Old IMEI: 004400-01-693000-8
IMEI Rebuild Aborted

what should i do
?

Odia The Ultimate · 05-28-2008, 18:20

Are you sure this phone is U600b and if so you have selected U600b and not U600?????

Odia.

black snake · 05-28-2008, 21:39

yes it is U600B , i flash it with Ustpro2 and U600BJP flash file , now it have corrupted IMEI and HWK can't repair it's IMEI and can't repair it's MSL

Odia The Ultimate · 05-29-2008, 01:04

Quote:

Originally Posted by black snake

yes it is U600B , i flash it with Ustpro2 and U600BJP flash file , now it have corrupted IMEI and HWK can't repair it's IMEI and can't repair it's MSL

Flash the phone with HWK using both mcu and cts, after repair the msl, once msl is repaird check the imei is correct.

Odia.

black snake · 05-31-2008, 12:10

I Do That But Same Result

Odia The Ultimate · 05-31-2008, 16:31

Quote:

Originally Posted by black snake

I Do That But Same Result

Post the log from MSL repair.

Odia.

black snake · 05-31-2008, 18:04

Using MSL S/N: R9XQ307003K
1st:
1st Boot Ok, McuId: 000200A3, Rom: 000200A3, 6-1.1 (Trident HPE)
2nd Boot Ok, McuId: 000200A3, Rom: 000200A3, 4-1.1
Fll Boot Ok, Vers: 5.13, fl_sceptrehp_sgh_hw1_v24_s07_m01_1.sre
Flash1: Fl_Id: 00EC0000_22FD0000 - Samsung KBJ17KC00M-B
Flash2: Fl_Id: 00EC0000_00340000 - Samsung KBH1xPE00M-N 1G
Baud Rate Set: 460800 bps
Read Done, St: 0x20000000, 65536 byte(s), Time: 00:01, 0
Flashing NOR part...
Write Done, 65552 byte(s), Time: 00:03
Phone Must be with Battery and Powered On !
MSL Repair Failed: Cannot Store Data

Odia The Ultimate · 06-01-2008, 03:04

Quote:

Originally Posted by black snake

Using MSL S/N: R9XQ307003K
1st:
1st Boot Ok, McuId: 000200A3, Rom: 000200A3, 6-1.1 (Trident HPE)
2nd Boot Ok, McuId: 000200A3, Rom: 000200A3, 4-1.1
Fll Boot Ok, Vers: 5.13, fl_sceptrehp_sgh_hw1_v24_s07_m01_1.sre
Flash1: Fl_Id: 00EC0000_22FD0000 - Samsung KBJ17KC00M-B
Flash2: Fl_Id: 00EC0000_00340000 - Samsung KBH1xPE00M-N 1G
Baud Rate Set: 460800 bps
Read Done, St: 0x20000000, 65536 byte(s), Time: 00:01, 0
Flashing NOR part...
Write Done, 65552 byte(s), Time: 00:03
Phone Must be with Battery and Powered On !
MSL Repair Failed: Cannot Store Data

Try with lower baud rates ...
If above not help, change cable.
Are you 100% sure the serial number you are using is correct? We hope to improve this routine later, by fetching the correct value from OTP.

Odia.

f164 · 06-01-2008, 09:24

Quote:

Originally Posted by black snake

i cant repair my U600B imei

Using MSL S/N: R9XQ307003K
1st:
1st Boot Ok, McuId: 000200A3, Rom: 000200A3, 6-1.1 (Trident HPE)
2nd Boot Ok, McuId: 000200A3, Rom: 000200A3, 4-1.1
Fll Boot Ok, Vers: 5.13, fl_sceptrehp_sgh_hw1_v24_s07_m01_1.sre
Flash1: Fl_Id: 00EC0000_22FD0000 - Samsung KBJ17KC00M-B
Flash2: Fl_Id: 00EC0000_00340000 - Samsung KBH1xPE00M-N 1G
Baud Rate Set: 460800 bps
Read Done, St: 0x20000000, 65536 byte(s), Time: 00:01, 0
Flashing NOR part...
Write Done, 65552 byte(s), Time: 00:03
Phone Must be with Battery and Powered On !
MSL Repair Failed: Cannot Store Data
Phone Must be with Battery and Powered On !
MSL : Active
MSL : Bypass Failed
Old IMEI: 004400-01-693000-8
IMEI Rebuild Aborted

what should i do
?

load an eprom file and try to repair imei it helps somtimes

khan_mobiles · 06-01-2008, 16:35

try to repair imei with battery inside

Odia The Ultimate · 06-01-2008, 18:39

Quote:

Originally Posted by f164

load an eprom file and try to repair imei it helps somtimes

No you cannot do that, that is exactly why Repair MSL was added, since people just write e2p without any knowledge of the harm they will cause.

These newer Trident have a new security which will cause an "Illegal Trial" message.

Odia.

f164 · 06-01-2008, 22:46

Quote:

Originally Posted by Odia The Ultimate

No you cannot do that, that is exactly why Repair MSL was added, since people just write e2p without any knowledge of the harm they will cause.

These newer Trident have a new security which will cause an "Illegal Trial" message.

Odia.

thank you for notification any information about these phones what models we shouldn't write directly e2p

black snake · 06-02-2008, 10:37

Quote:

Originally Posted by khan_mobiles

try to repair imei with battery inside

i do that but nothing

i think it is not my mistake , HWK can't repair it

05-28-2008, 17:34	#1 (permalink)
black snake Freak Poster Join Date: Jun 2007 Posts: 406 Member: 525784 Status: Offline Thanks Meter: 8	mr GSMMUNNA plz help me in samsung :( i cant repair my U600B imei Using MSL S/N: R9XQ307003K 1st: 1st Boot Ok, McuId: 000200A3, Rom: 000200A3, 6-1.1 (Trident HPE) 2nd Boot Ok, McuId: 000200A3, Rom: 000200A3, 4-1.1 Fll Boot Ok, Vers: 5.13, fl_sceptrehp_sgh_hw1_v24_s07_m01_1.sre Flash1: Fl_Id: 00EC0000_22FD0000 - Samsung KBJ17KC00M-B Flash2: Fl_Id: 00EC0000_00340000 - Samsung KBH1xPE00M-N 1G Baud Rate Set: 460800 bps Read Done, St: 0x20000000, 65536 byte(s), Time: 00:01, 0 Flashing NOR part... Write Done, 65552 byte(s), Time: 00:03 Phone Must be with Battery and Powered On ! MSL Repair Failed: Cannot Store Data Phone Must be with Battery and Powered On ! MSL : Active MSL : Bypass Failed Old IMEI: 004400-01-693000-8 IMEI Rebuild Aborted what should i do ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mr odia plz help me in 6110n flashing	khanjee_zahid	HWK	8	03-03-2009 14:47
mr 911-gt plz help me in n91 rpl	black snake	MT-BOX	8	09-04-2007 09:55
mr gobi plz help me in my cable set	amiriratel	VygisToolbox	4	02-02-2007 00:55
mr zulea plz help me in support area	amiriratel	Dongle Problems (USB-Smart)	0	05-18-2006 13:12
mr zulea plz help me in support area	amiriratel	Others (USB-Smart)	0	05-18-2006 13:10

05-28-2008, 18:20	#2 (permalink)
Odia The Ultimate No Life Poster Join Date: Apr 2001 Location: Where dreams become reality. Age: 54 Posts: 5,752 Member: 4042 Status: Offline Thanks Meter: 24,043	Are you sure this phone is U600b and if so you have selected U600b and not U600????? Odia.

05-28-2008, 21:39	#3 (permalink)
black snake Freak Poster Join Date: Jun 2007 Posts: 406 Member: 525784 Status: Offline Thanks Meter: 8	yes it is U600B , i flash it with Ustpro2 and U600BJP flash file , now it have corrupted IMEI and HWK can't repair it's IMEI and can't repair it's MSL

05-31-2008, 12:10	#5 (permalink)
black snake Freak Poster Join Date: Jun 2007 Posts: 406 Member: 525784 Status: Offline Thanks Meter: 8	I Do That But Same Result

05-31-2008, 18:04	#7 (permalink)
black snake Freak Poster Join Date: Jun 2007 Posts: 406 Member: 525784 Status: Offline Thanks Meter: 8	Using MSL S/N: R9XQ307003K 1st: 1st Boot Ok, McuId: 000200A3, Rom: 000200A3, 6-1.1 (Trident HPE) 2nd Boot Ok, McuId: 000200A3, Rom: 000200A3, 4-1.1 Fll Boot Ok, Vers: 5.13, fl_sceptrehp_sgh_hw1_v24_s07_m01_1.sre Flash1: Fl_Id: 00EC0000_22FD0000 - Samsung KBJ17KC00M-B Flash2: Fl_Id: 00EC0000_00340000 - Samsung KBH1xPE00M-N 1G Baud Rate Set: 460800 bps Read Done, St: 0x20000000, 65536 byte(s), Time: 00:01, 0 Flashing NOR part... Write Done, 65552 byte(s), Time: 00:03 Phone Must be with Battery and Powered On ! MSL Repair Failed: Cannot Store Data

06-01-2008, 16:35	#10 (permalink)
khan_mobiles Freak Poster Join Date: Mar 2007 Location: karachi pakistan Age: 35 Posts: 388 Member: 476667 Status: Offline Thanks Meter: 56	try to repair imei with battery inside