____SagemJTAGUnlocker Support____ - Page 10 - GSM-Forum

Oxo_Boxo · 05-13-2010, 20:01

Quote:

Originally Posted by zmohammed

see the log, please add this [05/13/10 17:56:38] Firmware: EF-ZM-ZAIN-P108A31FM(S)V1.0.0B02[05/13/10 17:56:38] IMEI: 357441023672178[05/13/10 17:56:38] [05/13/10 17:56:38] 2. Press Power ON shortly![05/13/10 17:56:38] 1. Remove the battery and then insert it again![05/13/10 17:56:38] [05/13/10 17:56:45] PROBLEM: Bootloader failed! (00)

Do Read Flash (Slow)
send result file flash.bin to [email protected] or post link here

kachman · 06-14-2010, 16:47

Hello

I need to unlock huawei g1157 but i dont have cable, can anyone pls help me with how i can conect using padfinder box? What is rx and tx using padfinder?

zmohammed · 07-01-2010, 18:50

i have read the forum without success,...iam not so expert in gsm indusrty, please help me direct illustrator for the cable to use to connect new huawei g1157 dyz from malawi

kachman · 07-01-2010, 20:38

Quote:

Originally Posted by zmohammed

i have read the forum without success,...iam not so expert in gsm indusrty, please help me direct illustrator for the cable to use to connect new huawei g1157 dyz from malawi

get the g1157 hansfree, then cut it and then open the mini-usb block. then desolder the hansfree wires from mini usb block. and then solder tx on pin 2, rx on pin 3 and GND on pin 10. ur done.

zmohammed · 07-02-2010, 09:44

Quote:

Originally Posted by kachman

get the g1157 hansfree, then cut it and then open the mini-usb block. then desolder the hansfree wires from mini usb block. and then solder tx on pin 2, rx on pin 3 and GND on pin 10. ur done.

thanks sir, but in infinity grnd is 7,and 8..not 10..
help pinouts for unbox with rj45 connector. cable i used for old huawei t156dy and g157dy doesnt work for g1157dyz.

kachman · 07-02-2010, 10:46

thats not a problem, just use pin 8 as your ground.

zmohammed · 07-02-2010, 13:46

Quote:

Originally Posted by kachman

thats not a problem, just use pin 8 as your ground.

bro, the handfree has 10 pins,.and there are only three wires which all cant be accessed through charger connector,.
i can easily unlock the phone by soldering wires on board, but how can i do this for more than 1000pcs???? i want make cable ,.help sir which pinouts on handsfree connector can be used as rx,tx, and grnd

kachman · 07-02-2010, 19:40

Quote:

Originally Posted by zmohammed

bro, the handfree has 10 pins,.and there are only three wires which all cant be accessed through charger connector,.
i can easily unlock the phone by soldering wires on board, but how can i do this for more than 1000pcs???? i want make cable ,.help sir which pinouts on handsfree connector can be used as rx,tx, and grnd

No, they can be accessed. Send me a picture of your handsfree connector. Cut it open then take a picture and send to my email. Ill illustrate where u solder the wires. [email protected]

zmohammed · 07-03-2010, 16:14

Quote:

Originally Posted by kachman

No, they can be accessed. Send me a picture of your handsfree connector. Cut it open then take a picture and send to my email. Ill illustrate where u solder the wires. [email protected]

sir, i got hansfree connector which has 10pins,.2x5may be tell me if keyboard up.which is rx,tx and gnd basing on 2x5 pins connector

Oxo_Boxo · 07-03-2010, 17:21

Quote:

Originally Posted by zmohammed

sir, i got hansfree connector which has 10pins,.2x5may be tell me if keyboard up.which is rx,tx and gnd basing on 2x5 pins connector

Look in support area Test Points section - EGold_pinouts.rar file

Crumarix1 · 07-05-2010, 11:37

Hi !

One vodafone 527 unlocked well with sag DD 9.5 .

Next one always botloader fail .

what is this and how to use it ?

"Unlock via SagemDD Special Service for Locosto v.2 MCU.

My421Z, My433x;
VF527, VF533;
"

Oxo_Boxo · 07-05-2010, 16:22

Quote:

Originally Posted by Crumarix1

Hi !

One vodafone 527 unlocked well with sag DD 9.5 .

Next one always botloader fail .

what is this and how to use it ?

"Unlock via SagemDD Special Service for Locosto v.2 MCU.

My421Z, My433x;
VF527, VF533;
"

Please use search forum engine ... we explained Special Service too many times

regards

kaplanerkan · 09-13-2010, 16:36

hello sagemdd team,

i m a new user and i buy yesterday a sagdd-box.
can you please activate my account or my sagdd-box?

on SagemJTaglogger can i see following number.
Dongle Version 1.1
Dongle Serial 37013917
Problem: Failed to read IMEI

Thanks

latigido · 09-13-2010, 18:21

@kaplanerkan

How and where to register your box?
All explained clearly in the first post!

kaplanerkan · 09-14-2010, 14:21

Quote:

Originally Posted by latigido

@kaplanerkan

How and where to register your box?
All explained clearly in the first post!

I bought my sag-box from here:
Service4GSM
and i try to register on the site here (today again registered):
SagDD

Please activate my account/sag-box.
I dont have any confirmation over 3 days.

thanks
erkaN

06-14-2010, 16:47	#137 (permalink)
kachman No Life Poster Join Date: May 2006 Location: zambia Posts: 1,555 Member: 272581 Status: Offline Thanks Meter: 118	Huawei G1157 Hello I need to unlock huawei g1157 but i dont have cable, can anyone pls help me with how i can conect using padfinder box? What is rx and tx using padfinder?

07-01-2010, 18:50	#138 (permalink)
zmohammed Junior Member Join Date: Feb 2010 Posts: 23 Member: 1245488 Status: Offline Thanks Meter: 1	give secretes to connect new huawei g1157 i have read the forum without success,...iam not so expert in gsm indusrty, please help me direct illustrator for the cable to use to connect new huawei g1157 dyz from malawi Last edited by Oxo_Boxo; 07-02-2010 at 06:03.

09-13-2010, 16:36	#148 (permalink)
kaplanerkan Insane Poster Join Date: Nov 2009 Posts: 81 Member: 1150804 Status: Offline Thanks Meter: 23	Activation hello sagemdd team, i m a new user and i buy yesterday a sagdd-box. can you please activate my account or my sagdd-box? on SagemJTaglogger can i see following number. Dongle Version 1.1 Dongle Serial 37013917 Problem: Failed to read IMEI Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
____SagemJtagUnlocker ON-LINE SERVER____	Oxo_Boxo	SAGEM JTAG UNLOCKER	52	07-05-2006 01:58

07-02-2010, 10:46	#141 (permalink)
kachman No Life Poster Join Date: May 2006 Location: zambia Posts: 1,555 Member: 272581 Status: Offline Thanks Meter: 118	thats not a problem, just use pin 8 as your ground.

07-05-2010, 11:37	#146 (permalink)
Crumarix1 No Life Poster Join Date: Sep 2004 Location: in AXE control room Age: 54 Posts: 954 Member: 84300 Status: Offline Thanks Meter: 74	Hi ! One vodafone 527 unlocked well with sag DD 9.5 . Next one always botloader fail . what is this and how to use it ? "Unlock via SagemDD Special Service for Locosto v.2 MCU. My421Z, My433x; VF527, VF533; "

09-13-2010, 18:21	#149 (permalink)
latigido No Life Poster Join Date: Feb 2002 Location: Europe Posts: 6,102 Member: 9544 Status: Offline Thanks Meter: 5,533	@kaplanerkan How and where to register your box? All explained clearly in the first post!