Alcatel HUB41 this model Alcatel from carrier cannot connecte internet
 

i have this model Alcatel i have 4 piece he don't connected to other network after unlocked it full signal bar but cannot connected to internet i put APN manually same problem any face this problem need help urgently

MODEL: LinkHub Alcatel HUB41

https://i.postimg.cc/WzMZrZSH/alcatel-LI.jpg

THANKS ADVANCED

Post original device PID, model, number, etc.

(HH40, HH41, HH41V ... etc.)


p.s. You dont have active profile. Try to make one, with correct APN, user/password, etc.


b.r.
Alex

For info
 

I forget mentioned the model and PID HH41NH-2BAVO2-1 from claro need software for fix problem router cannot connect any carrier my country i put apn i try all setting same problem. exist another way i can upgrade or change firmware.

I already sent you tool, instructions few days ago,
Have you even tried it ?

There is service manual in archive,
Inside you can read how to do fw update.

Dont repeat useless posts, just open your eyes.

B r
Alex

thanks for support
 

thanks you sir i fix 4 3 pieces of this model tools work fine other one bricked can i get pdf level 3 or 4 need help for fix that connection LAN not establish how i can fix if lan not working how i can flash it properly.
https://i.postimg.cc/188CMqqJ/20210615-085825.jpg
https://i.postimg.cc/PNkqjbfv/20210615-085830.jpg

If the update tool cant detect it, probably not.

There are no l3 or l4 documents, and no mention of dead devices.

However, try holding reset button when insert power cable, maybe tool will detect it.

B r
Alex

HH41NH bricked how i can fix?
 

how i can fix this problem LAN not establish connection i think this modem its bricked any help for fix
maybe be exist a pdf level 3or 4 for unbricked


https://i.postimg.cc/VL282fzP/ll.jpg

ok i will try but i remember i already try nothing work first time when plug i see LAN light appear after gone

https://i.postimg.cc/pXVkgnKw/failed.pnghttps://i.postimg.cc/26bNdKSx/error.png

the problem: wifi not appear only cable Lan can connect to internet,
when i try to flash he says that the ip change and after flash tool cannot connect

Hi,

there is no L3 or L4 documents, as i already told you.

If device can not connect (go to flash mode),
then is either Hardware Issue or Hard-bricked.

So far there is not known method for repair.
(except visiting authorized service center and board swap)


b.r.
Alex

thanks for help
 

yes thanks for help you i think no solution for that i already try to look at mainboard and Heat some IC same problem nothing result

Want Alcatel firmware too, need to flash cuz reboot every 30 seconds, thnks

it doesnt look like software problem.

b.r.
Alex

I have the same problem, but in my case it says invalid sim, thanks for your help, sorry for my bad English I use an online translator

Hi sir

Hello sir, I have the same problem, can you send me the tools so I can solve the problem, i need to flash the firmware.. my model router is HH41nh


Hi sir
This is The information.

Nombre del dispositivo:
HUB41
IMEI:
014993002291698
IMSI:
370012007127868
Mi número:
18091163476
Versión de software:
HH41_NK_02.00_16
Versión de módem:
HH41_NK_02.00_16
Dirección MAC:
88:9e:33:82:45:78

PID HH41NH-2BAVO2-1

And what is that "same problem" ?

b.r.
Alex

i have this model Alcatel , he don't connected to other network after unlocked it full signal bar but cannot connected to internet i put APN manually same problem any face this problem need help urgently

MODEL: LinkHub Alcatel HUB41

I need the flash firmware.

If the device asked for code and you entered it,
it accepted and said "unlock done" or "unlocked",
Then - your APN is not good.

example:

- apn (ie: tele2net)
- dial no. (ie: *99#)
- user
- password
- protocol



b.r.
Alex

I have HH41V form carrier VIP Serbia

I would like to unlock it so I tought that maybe firmware upgrade would give me better results and unlock more user interface options like those present at various screenshots on internet.

This tool with manual would be something nice to play with if you are willing to share.

Hvala unapred i srecna ti nova godina.

No unlock requests here, as per forum rules.
There is code request section dedicated for it.

Request posts of this kind are usualy deleted
without further notice.

B.r.
Alex

I dont need NCK unlock but feature unlock that new FW would give me.

There are no basically any new features
In any of such modems, beside those that are already there.
Those are simple/basic 4g routers, nothing else.
Updates are just security patches, for known vulnerabilities and thats it.
Alcatel/tcl are very basic devices with poor support,
aimed at low-level market segment,
So nothing special to expect from it.

There is even no retail version of firmware on support,
Only carrier customized versions, locked to certain bands,
And probably fratures.

All of that is worth nothing, since domestic operaters
Use private ip ranges for 4g users, so simple network options
like port forwarding are useless.
(You dont have public ip address on your device)

B.r.
Alex

I was looking at some screenshots online and I tought I saw more developed GUI - like more options. To be honest I dont need more that I currently have, but router is bugging every now and than - at least once a day. So I thought because my FW version is low 2.00.05 and that there are a lot bigger numbers that at least those would be more stable at its primary task.

I thought that my unit is bugged ans so I bought same ones on flea market for cheap, but all these are total crap.

Than I bought nice Huawei router - but that one is locked with 16 digit code (meaning there is no easy way to unlock it)

And so I am back with this crap. Hoping that FW upgrade would solve connection issues.

Hello, can you send the files to update the firmware? I have this model and I want to update it now, thanks

Hello, I have the same problem that it doesn't connect to the internet after unlocking, it only works with Claro, even if I add another profile, it's the same thing. I would like to change the software on my computer to see if it can connect, thank you very much before hand


Nombre del dispositivo:
HUB41
IMEI:
014993002816197
IMSI:
370012016404496
Mi número:
Versión de software:
HH41_NK_02.00_19
Versión de módem:
HH41_NK_02.00_19
Dirección MAC:
f0:51:36:3a:72:43

Hello, I also have the same problem, it tells me out of the zone even with the clear sim card, I need the software I also hope you can help me

Hello Alex. I was wondering if you could send me those tools as well ? I have an Alcatel that got bricked when someone tried to upgrade the firmware. It's model HH41NH-2BLZCA2.
The only thing I seem to be able to do is ping it at 192.168.1.1. The web interface doesn't come up, doesn't seem to accept any other connections like SSH or Telnet.
May thanks in advance.

Alcatel HUB41 HH41NH-2BAVDO2-1: I need Flashing Tool

check PM.

b.r.
Alex