3110c dead phone recovered

[kmaxmax]

 
Selected Highest installed version: 07.30
Mcu rm237__07.30.mcusw
Ppm rm237__07.30.ppm_c
Content rm237__07.30.image_c_tr
BB5 PM back Phone is in: Phone is not responding!
Processing File:  rm237__07.30.mcusw
Boot...
FAILED to find USB Device.
 Attach phone to usb port!
Switched to USB BUS
FAILED TO BOOT PHONE!!!
Make sure that phone is connected.
BB5 PM back Phone is in: Phone is not responding!
Processing File:  rm237__07.30.mcusw
Boot...
CONNECT PHONE to USB and Power ON phone!
Pooling for phone...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&472eea3&0&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Sending ULO code
Sending UPDAPP code
Sending PASUBTOC code
Pooling for device removal...
Device removed
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&28c466d6&0&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[31.75 MB]...
erasing RAP [00000000 to 000006BF]
erasing RAP [000006C0 to 0001FFFF]
erasing RAP [00020000 to 0007FFFF]
erasing RAP [00080000 to 000DFFFF]
erasing RAP [00100000 to 001FFFFF]
erasing RAP [00200000 to 0031FFFF]
erasing RAP [00320000 to 0105FFFF]
erasing RAP [01060000 to 01067FFF]
erasing RAP [01068000 to 0107FFFF]
erasing RAP [01520000 to 01FDFFFF]
erasing RAP [01080000 to 0151FFFF]
in 147.86s
Flash[14.49 MB]...in 73.06s 
* * Processed file in 231.56 seconds
Processing File:  rm237__07.30.image_c_tr
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&28c466d6&0&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.00s
Flash[3.69 MB]...Content page size is 128K
in 18.75s 
* * Processed file in 18.88 seconds
Processing File:  rm237__07.30.ppm_c
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&28c466d6&0&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.02s
Flash[3.75 MB]...in 18.92s 
* * Processed file in 19.05 seconds
Restarting device...
Pooling for device removal...
Device disconnected.
* * * Phone flashing done in   4:47 minutes
 Post Flash serial tunning of phone....
Pooling mode for full factory set...
 Phone not responding, try to set manually!