heip me after flashing MT n76 dont work - GSM-Forum

nafanya · 10-11-2007, 18:13

Selected Highest installed version: 10.0.035
VPP is DISABLED.
Using Tx2 Data line.
BB5 PM back Phone is in: Phone is not responding!
Processing File: RM135_10.0.035_prd.C00
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
Backup: \GSM_35626_0.r3c
Erase RAP3 [00040000 - 00082FFF]
Erase RAP3 [00083400 - 0087FFFF]
Erase RAP3 [00B80000 - 07B3FFFF]
Erase[120.00 MB]...
Waiting response for 320 Sec...in 1.93s
Flash[48.46 MB]...in 71.70s
* * Processed file in 82.59 seconds
Processing File: RM135_10.0.035_022_000_U01_uda.fpsx
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
Erase RAP3 [05380000 - 07B3FFFF]
Erase[39.75 MB]...
Waiting response for 320 Sec...in 1.71s
Flash[6.92 MB]...in 11.07s
* * Processed file in 40.23 seconds
Extract content...fail
Processing File: RM135_10.0.035_prd.V05
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
Erase RAP3 [03D80000 - 0537FFFF]
Erase[22.00 MB]...
Waiting response for 320 Sec...in 0.88s
Flash[13.97 MB]...in 20.75s
* * Processed file in 30.15 seconds
* * * Phone flashing done in 3:57 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
Phone not responding, try to set manually!
Phone is in: Phone is not responding, power on phone!

where extract content-nand flash?

911GT · 10-12-2007, 09:06

you have a connected WIRE to TX2 or only check it in soft?

RRRRR · 10-12-2007, 09:08

BB5 PM back Phone is in: Phone is not responding!

try to pres ok buttom on mt soft and post log

nafanya · 10-12-2007, 10:40

how need rezistor for bsi -7.5Kom? or other

RRRRR · 10-12-2007, 11:27

7,5 is ok .. conect this phone to box . uncek disable vpp and chek use tx2. then pres ok buttom on mt sw. and post here log.

RRRRR · 10-12-2007, 11:52

try version 20.0.041

nafanya · 10-12-2007, 12:15

sing Tx2 Data line.
BB5 PM back Phone is in: Phone is not responding!
Processing File: RM135_20.0.041_prd.C00
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
Backup: \GSM_356_9.r3c
Erase RAP3 [00040000 - 00082FFF]
Erase RAP3 [00083400 - 0087FFFF]
Erase RAP3 [00B80000 - 07B3FFFF]
Erase[120.00 MB]...
Waiting response for 320 Sec...in 1.93s
Flash[49.32 MB]...in 72.11s
* * Processed file in 83.00 seconds
Processing File: RM135_20.0.041_025_000_U01_uda.fpsx
Low level format...fail
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
Erase RAP3 [05380000 - 07B3FFFF]
Erase[39.75 MB]...
Waiting response for 320 Sec...in 1.47s
Flash[6.92 MB]...in 10.99s
* * Processed file in 72.05 seconds
Extract content...fail
Processing File: RM135_20.0.041_prd.V05
Boot...
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
Erase RAP3 [03F00000 - 0537FFFF]
Erase[20.50 MB]...
Waiting response for 320 Sec...in 0.50s
Flash[13.95 MB]...in 20.57s
* * Processed file in 29.58 seconds
* * * Phone flashing done in 4:29 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
Phone not responding, try to set manually!

RRRRR · 10-12-2007, 12:28

try this one .....and post log.......

nafanya · 10-12-2007, 12:39

Set Flash mode for info =============
VBat is 3.93V

Vpp pin has 0.09V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
Boot...
Using Tx2 Data line.
RAPIDOv102_2nd.fg
RAPIDOv11_algo.fg
BOOT OK...
Phone Type: BB5
------------------- SYSTEM ID Response: 7 blocks -------------
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006400C192101011103
EM_ASIC_ID( RAP ):
00000295
EM_ASIC_ID( RAP ):
00000B22
PUBLIC_ID( RAP ):
17900016B65C00589887228403940E11379EEEE8
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
9A28E119033B91D14D22838C86D0D53C
ROM_ID( RAP ):
F2C6EBADC86E6189
--------------- Device ID Response: 3 blocks -------------
Storage Device:
Owner Asic: RAP
Type: NAND Flash
Index: 0
Flash: Samsung, 00EC 0030 0060 0121
Storage Device Contents:
Owner Asic: RAP
030000000000000000000000000000000000
============= Set FBus mode for info =============
VBat is 3.93V

Vpp pin has 0.10V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0

911GT · 10-12-2007, 14:26

all is ok need to chceck DisableVPP and check Use TX2Line all need to be ok

RRRRR · 10-12-2007, 14:32

i hawe just one idea try to erase phone and then flash but you need imei beckup and pm beckup. you hawe just imei . after erase you will need rpl

nafanya · 10-16-2007, 15:00

how i understand very need read becup imei and need work oter full pm for n76?
idea -need erase

BB5Erase_8MBrap.bin – fully erase first 8MB of RAP3 flash.
BB5Erase_16MBrap.bin - fully erase first 16MB of RAP3 flash.
BB5Erase_EE_8MBrap.bin – erase only eeprom located at the end of 8th MB
BB5Erase_EE_16MBrap.bin – erase only eeprom located at the end of first 16th MB. select as MCU File then Flash ur phone
then need flashing phone fw and write full pm,write becap imei-this good solution or no?ask me plz RRRRR

911GT · 10-16-2007, 17:19

mate this is RAPIDO phone!!!
need ERASE_UNI RAPIDO

nafanya · 10-17-2007, 00:28

where find ERASE_UNI RAPIDO -?

nafanya · 10-17-2007, 09:20

who have files for ERASE_UNI RAPIDO ???????

10-11-2007, 18:13	#1 (permalink)
nafanya No Life Poster Join Date: Nov 2002 Location: Russia norten-caucasus Age: 52 Posts: 714 Member: 18234 Status: Offline Thanks Meter: 97	heip me after flashing MT n76 dont work Selected Highest installed version: 10.0.035 VPP is DISABLED. Using Tx2 Data line. BB5 PM back Phone is in: Phone is not responding! Processing File: RM135_10.0.035_prd.C00 Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg Backup: \GSM_35626_0.r3c Erase RAP3 [00040000 - 00082FFF] Erase RAP3 [00083400 - 0087FFFF] Erase RAP3 [00B80000 - 07B3FFFF] Erase[120.00 MB]... Waiting response for 320 Sec...in 1.93s Flash[48.46 MB]...in 71.70s * * Processed file in 82.59 seconds Processing File: RM135_10.0.035_022_000_U01_uda.fpsx Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg Erase RAP3 [05380000 - 07B3FFFF] Erase[39.75 MB]... Waiting response for 320 Sec...in 1.71s Flash[6.92 MB]...in 11.07s * * Processed file in 40.23 seconds Extract content...fail Processing File: RM135_10.0.035_prd.V05 Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg Erase RAP3 [03D80000 - 0537FFFF] Erase[22.00 MB]... Waiting response for 320 Sec...in 0.88s Flash[13.97 MB]...in 20.75s * * Processed file in 30.15 seconds * * * Phone flashing done in 3:57 minutes Post Flash serial tunning of phone.... Pooling mode for full factory set... Phone not responding, try to set manually! Phone is in: Phone is not responding, power on phone! where extract content-nand flash? Last edited by nafanya; 10-11-2007 at 18:23.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
after a few month dont work with USTPro account is expired ??	CyberMCS	UST Pro II	2	08-01-2009 11:04
mt-box dont work with bb5	pescailla	MT-BOX	10	07-22-2009 14:50
tryin flash d720 now dont work	savinjcan	NSPRO	1	04-20-2006 11:52
flashing fota file dont work	wynasoft1	Cruiser Suite	4	02-25-2006 05:54
Nokia 8910i after flashing with Twister DONT work bluetooh	eddi®	Twisterflasher	5	06-04-2005 14:06

10-12-2007, 09:06	#2 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	you have a connected WIRE to TX2 or only check it in soft?

10-12-2007, 09:08	#3 (permalink)
RRRRR No Life Poster Join Date: Oct 2004 Location: Latvia-Riga Age: 44 Posts: 989 Member: 88823 Status: Offline Thanks Meter: 26	BB5 PM back Phone is in: Phone is not responding! try to pres ok buttom on mt soft and post log

10-12-2007, 10:40	#4 (permalink)
nafanya No Life Poster Join Date: Nov 2002 Location: Russia norten-caucasus Age: 52 Posts: 714 Member: 18234 Status: Offline Thanks Meter: 97	how need rezistor for bsi -7.5Kom? or other

10-12-2007, 11:27	#5 (permalink)
RRRRR No Life Poster Join Date: Oct 2004 Location: Latvia-Riga Age: 44 Posts: 989 Member: 88823 Status: Offline Thanks Meter: 26	7,5 is ok .. conect this phone to box . uncek disable vpp and chek use tx2. then pres ok buttom on mt sw. and post here log.

10-12-2007, 11:52	#6 (permalink)
RRRRR No Life Poster Join Date: Oct 2004 Location: Latvia-Riga Age: 44 Posts: 989 Member: 88823 Status: Offline Thanks Meter: 26	try version 20.0.041

10-12-2007, 12:15	#7 (permalink)
nafanya No Life Poster Join Date: Nov 2002 Location: Russia norten-caucasus Age: 52 Posts: 714 Member: 18234 Status: Offline Thanks Meter: 97	sing Tx2 Data line. BB5 PM back Phone is in: Phone is not responding! Processing File: RM135_20.0.041_prd.C00 Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg Backup: \GSM_356_9.r3c Erase RAP3 [00040000 - 00082FFF] Erase RAP3 [00083400 - 0087FFFF] Erase RAP3 [00B80000 - 07B3FFFF] Erase[120.00 MB]... Waiting response for 320 Sec...in 1.93s Flash[49.32 MB]...in 72.11s * * Processed file in 83.00 seconds Processing File: RM135_20.0.041_025_000_U01_uda.fpsx Low level format...fail Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg Erase RAP3 [05380000 - 07B3FFFF] Erase[39.75 MB]... Waiting response for 320 Sec...in 1.47s Flash[6.92 MB]...in 10.99s * * Processed file in 72.05 seconds Extract content...fail Processing File: RM135_20.0.041_prd.V05 Boot... RAPIDOv102_2nd.fg RAPIDOv11_algo.fg Erase RAP3 [03F00000 - 0537FFFF] Erase[20.50 MB]... Waiting response for 320 Sec...in 0.50s Flash[13.95 MB]...in 20.57s * * Processed file in 29.58 seconds * * * Phone flashing done in 4:29 minutes Post Flash serial tunning of phone.... Pooling mode for full factory set... Phone not responding, try to set manually!

10-12-2007, 12:39	#9 (permalink)
nafanya No Life Poster Join Date: Nov 2002 Location: Russia norten-caucasus Age: 52 Posts: 714 Member: 18234 Status: Offline Thanks Meter: 97	Set Flash mode for info ============= VBat is 3.93V Vpp pin has 0.09V, Not Connected Pins: Mbus 1, Box Tx 1, Box Rx 0, Bsi 0 Boot... Using Tx2 Data line. RAPIDOv102_2nd.fg RAPIDOv11_algo.fg BOOT OK... Phone Type: BB5 ------------------- SYSTEM ID Response: 7 blocks ------------- SYSTEM_ASIC_ID( RAP ): 000000010000022600010006400C192101011103 EM_ASIC_ID( RAP ): 00000295 EM_ASIC_ID( RAP ): 00000B22 PUBLIC_ID( RAP ): 17900016B65C00589887228403940E11379EEEE8 ASIC_MODE_ID( RAP ): 00 ROOT_KEY_HASH( RAP ): 9A28E119033B91D14D22838C86D0D53C ROM_ID( RAP ): F2C6EBADC86E6189 --------------- Device ID Response: 3 blocks ------------- Storage Device: Owner Asic: RAP Type: NAND Flash Index: 0 Flash: Samsung, 00EC 0030 0060 0121 Storage Device Contents: Owner Asic: RAP 030000000000000000000000000000000000 ============= Set FBus mode for info ============= VBat is 3.93V Vpp pin has 0.10V, Not Connected Pins: Mbus 1, Box Tx 1, Box Rx 0, Bsi 0

10-12-2007, 14:26	#10 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	all is ok need to chceck DisableVPP and check Use TX2Line all need to be ok

10-12-2007, 14:32	#11 (permalink)
RRRRR No Life Poster Join Date: Oct 2004 Location: Latvia-Riga Age: 44 Posts: 989 Member: 88823 Status: Offline Thanks Meter: 26	i hawe just one idea try to erase phone and then flash but you need imei beckup and pm beckup. you hawe just imei . after erase you will need rpl

10-16-2007, 15:00	#12 (permalink)
nafanya No Life Poster Join Date: Nov 2002 Location: Russia norten-caucasus Age: 52 Posts: 714 Member: 18234 Status: Offline Thanks Meter: 97	how i understand very need read becup imei and need work oter full pm for n76? idea -need erase BB5Erase_8MBrap.bin – fully erase first 8MB of RAP3 flash. BB5Erase_16MBrap.bin - fully erase first 16MB of RAP3 flash. BB5Erase_EE_8MBrap.bin – erase only eeprom located at the end of 8th MB BB5Erase_EE_16MBrap.bin – erase only eeprom located at the end of first 16th MB. select as MCU File then Flash ur phone then need flashing phone fw and write full pm,write becap imei-this good solution or no?ask me plz RRRRR

10-16-2007, 17:19	#13 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	mate this is RAPIDO phone!!! need ERASE_UNI RAPIDO

10-17-2007, 00:28	#14 (permalink)
nafanya No Life Poster Join Date: Nov 2002 Location: Russia norten-caucasus Age: 52 Posts: 714 Member: 18234 Status: Offline Thanks Meter: 97	where find ERASE_UNI RAPIDO -?

10-17-2007, 09:20	#15 (permalink)
nafanya No Life Poster Join Date: Nov 2002 Location: Russia norten-caucasus Age: 52 Posts: 714 Member: 18234 Status: Offline Thanks Meter: 97	who have files for ERASE_UNI RAPIDO ???????