MT-BOX BB5 Downgrading Helpful Hint Here... - GSM-Forum

Shayesta197 · 05-05-2007, 02:17

To Downgrade your Firmware please do the following...

1. Connect MT-Box
2. Connect your BB5 Handset via the DKU-2 Cable
3. Open MT-Box Software
4. Put Phone into Local Mode
5. Read Phone Info
6. Select Firmware Version
7. Click on BB5 Downgrade button
8. All Done!

Tested on N70, N80, N91, 6270, 6280, N73, N93

IBMOBILES · 05-05-2007, 07:39

thank you so much for ur help , just i was trying to get any help for downgrading but u solve my problem
thanks

barhoomh · 05-05-2007, 10:21

thank u tested from me
100%

CellTronic · 05-05-2007, 15:18

and in case of dead phone any sugestion

gsm-decode · 05-05-2007, 15:52

thank you for the help
Now i can downgrade BB5

Really thanks
Rgds

Shayesta197 · 05-05-2007, 23:36

To CellTronic

In case of Dead Phone...

Flash using MT-Box with Higher Firmware Version then follow the steps for downgrade soultion mentioned before...

Amir-SkillZ · 05-06-2007, 06:43

and also only FBUS cable will help in dead Case (for proper results)

gsm-decode · 05-06-2007, 09:24

WoW
Very good News

skull · 11-11-2007, 17:08

hi
this solution works with 6085 to tested by me.
i have one n80 always give me this error:
Phone is in: Local mode
Model: RM-92 (Miro (EU/APAC) )
V 05wk33v42/07-05-07/RM-92 (c) Nokia.
Production serial number SEK767857
Product code 0549462
Module code 0202689
Basic production code 0538300
Flash code
Order number
Long production SN
MCU SW V 05wk33v42/07-05-07/RM-92/(c) Nokia.
HW 6107
PCI
RFIC 17211721
DSP miro_05wk32v42p1
APE SW Core V 5.0719.0.2/24-05-2007/RM-92/
APE Variant V 5.0719.0.2-01/24-05-2007/RM-92/
Retu 15
Tahvo 22
APE HW 1
APE ADSP SW 256
Camera 1
APE BT HCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13.
Content Pack N80_userarea_5.0719.0.2-prd.U01
IMEI: 352764015576957

BB5 Downgrade - - - - - - - - - - -
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
Phone is in: Local mode
Found record. Clearing and sending to phone..
============== Staring flash procedure =================
Processing File: N80_4.0623.0.41-prd_western_C00_cc.fpsx
Boot...
\\?\nmwcd#vid_0421&pid_0445&if_oth#6&16b1e6c&0&00# {4f919102-4adf-11d5-882d-00b0d02fe381}
FAILED TO BOOT PHONE!!!
Make sure that phone is connected.

any solution please?

ahmertelecom · 11-11-2007, 17:41

Quote:

Originally Posted by Shayesta197

To Downgrade your Firmware please do the following...

1. Connect MT-Box
2. Connect your BB5 Handset via the DKU-2 Cable
3. Open MT-Box Software
4. Put Phone into Local Mode
5. Read Phone Info
6. Select Firmware Version
7. Click on BB5 Downgrade button
8. All Done!

Tested on N70, N80, N91, 6270, 6280, N73, N93

i try 6280 and n70 many times but no luck with usb cable after flash phone again try with fbus its work dont try i think its not confirm solution

911GT · 11-11-2007, 17:58

what ver of soft you use?

harim_1981 · 11-12-2007, 05:41

also take a backup of Imei before doing this...

coz...sometimes it wont be successful process...

uqbah · 11-12-2007, 06:04

Quote:

Originally Posted by Shayesta197

To Downgrade your Firmware please do the following...

1. Connect MT-Box
2. Connect your BB5 Handset via the DKU-2 Cable
3. Open MT-Box Software
4. Put Phone into Local Mode
5. Read Phone Info
6. Select Firmware Version
7. Click on BB5 Downgrade button
8. All Done!

Tested on N70, N80, N91, 6270, 6280, N73, N93

dear its tested one by me on many handsets .....
but few things to be added......
just take full pm backup or even 308 must be and also imei backup ...
that would help in case of dead fone ...........
and also some versions doesnot support usb ...
i will list them later....
any way nice move man
br khalid

05-05-2007, 02:17	#1 (permalink)
Shayesta197 Banned Join Date: Apr 2006 Posts: 448 Member: 269021 Status: Offline Thanks Meter: 87	MT-BOX BB5 Downgrading Helpful Hint Here... To Downgrade your Firmware please do the following... 1. Connect MT-Box 2. Connect your BB5 Handset via the DKU-2 Cable 3. Open MT-Box Software 4. Put Phone into Local Mode 5. Read Phone Info 6. Select Firmware Version 7. Click on BB5 Downgrade button 8. All Done! Tested on N70, N80, N91, 6270, 6280, N73, N93

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MT-BOX BB5+ Bugs and ERRORs HERE	GSM-DOCTOR	MT-BOX	57	07-04-2009 21:53
Post Here Successfully Unlocked with MT Box BB5+ Phones	mymo	MT-BOX	46	03-11-2009 17:56
The CHEAPEST PRICES here.for SUPER XSIM,MSSBOX,UB,MT BOX ,BB5 UNIVERSAL CABLE SET.etc	gsm-sources	Main Sales Section	0	04-24-2008 04:45
MT-Box BB5 ask /rpl service again work as normal	MicrostarGSM®	MT-BOX	39	06-22-2007 06:30
@ MT-Box team Please help V902sh (japan) not power On after Mt-box	bedjo	MT-BOX	1	11-22-2005 11:30

05-05-2007, 07:39	#2 (permalink)
IBMOBILES No Life Poster Join Date: Feb 2004 Location: inside AFRICA Posts: 842 Member: 56157 Status: Offline Sonork: 100.1573682 Thanks Meter: 171	thank you so much for ur help , just i was trying to get any help for downgrading but u solve my problem thanks

05-05-2007, 10:21	#3 (permalink)
barhoomh No Life Poster Join Date: Sep 2004 Location: in somewher in the earth Age: 43 Posts: 746 Member: 82249 Status: Offline Sonork: 100.114416 Thanks Meter: 63	thank u tested from me 100%

05-05-2007, 15:18	#4 (permalink)
CellTronic No Life Poster Join Date: Jan 2007 Location: Recife - Brazil Posts: 569 Member: 434450 Status: Offline Thanks Meter: 51	and in case of dead phone any sugestion

05-05-2007, 15:52	#5 (permalink)
gsm-decode No Life Poster Join Date: Dec 2003 Location: SC610108CFU S-CLASS Age: 44 Posts: 1,505 Member: 47441 Status: Offline Thanks Meter: 14	thank you for the help Now i can downgrade BB5 Really thanks Rgds

05-05-2007, 23:36	#6 (permalink)
Shayesta197 Banned Join Date: Apr 2006 Posts: 448 Member: 269021 Status: Offline Thanks Meter: 87	To CellTronic In case of Dead Phone... Flash using MT-Box with Higher Firmware Version then follow the steps for downgrade soultion mentioned before...

05-06-2007, 06:43	#7 (permalink)
Amir-SkillZ No Life Poster Join Date: Nov 2004 Location: Capetown Posts: 6,709 Member: 91045 Status: Offline Thanks Meter: 8,696	and also only FBUS cable will help in dead Case (for proper results)

05-06-2007, 09:24	#8 (permalink)
gsm-decode No Life Poster Join Date: Dec 2003 Location: SC610108CFU S-CLASS Age: 44 Posts: 1,505 Member: 47441 Status: Offline Thanks Meter: 14	WoW Very good News

11-11-2007, 17:08	#9 (permalink)
skull Freak Poster Join Date: Feb 2002 Location: Portugal / Lisboa Age: 50 Posts: 131 Member: 9368 Status: Offline Thanks Meter: 1	hi this solution works with 6085 to tested by me. i have one n80 always give me this error: Phone is in: Local mode Model: RM-92 (Miro (EU/APAC) ) V 05wk33v42/07-05-07/RM-92 (c) Nokia. Production serial number SEK767857 Product code 0549462 Module code 0202689 Basic production code 0538300 Flash code Order number Long production SN MCU SW V 05wk33v42/07-05-07/RM-92/(c) Nokia. HW 6107 PCI RFIC 17211721 DSP miro_05wk32v42p1 APE SW Core V 5.0719.0.2/24-05-2007/RM-92/ APE Variant V 5.0719.0.2-01/24-05-2007/RM-92/ Retu 15 Tahvo 22 APE HW 1 APE ADSP SW 256 Camera 1 APE BT HCI Version 2 (rev. 0). LMP Version 2 (rev. 3504). Manufacturer 13. Content Pack N80_userarea_5.0719.0.2-prd.U01 IMEI: 352764015576957 BB5 Downgrade - - - - - - - - - - - Pins: Mbus 1, Box Tx 1, Box Rx 0, Bsi 0 Phone is in: Local mode Found record. Clearing and sending to phone.. ============== Staring flash procedure ================= Processing File: N80_4.0623.0.41-prd_western_C00_cc.fpsx Boot... \\?\nmwcd#vid_0421&pid_0445&if_oth#6&16b1e6c&0&00# {4f919102-4adf-11d5-882d-00b0d02fe381} FAILED TO BOOT PHONE!!! Make sure that phone is connected. any solution please?

11-11-2007, 17:58	#11 (permalink)
911GT No Life Poster Join Date: Dec 2006 Posts: 5,760 Member: 409197 Status: Offline Thanks Meter: 75	what ver of soft you use?

11-12-2007, 05:41	#12 (permalink)
harim_1981 No Life Poster Join Date: Mar 2006 Location: tamilnadu, india. Posts: 2,319 Member: 243961 Status: Offline Sonork: 100.1591654 Thanks Meter: 104	also take a backup of Imei before doing this... coz...sometimes it wont be successful process...