about C30 "Phone Failure" - GSM-Forum

Florin · 08-06-2001, 16:45

hi to all i need a sol to repair my C30 "phone failure"

I need too rom lang.package for C30 pls help me best reagrds Florin [email protected] ICQ:118890743

te · 08-06-2001, 17:52

No problem. Solution for "phone failure" in exchange for bosch, siemens, sagem service manual, bosch or sagem flash software.

asas · 08-06-2001, 17:55

I have "phone failure" too. It is posible to read from c30 eeprom? And the write to it? I have full flashed butj still that program. I think problem is in eeprom.

asas · 08-07-2001, 00:14

Now i know that eeprom start from F8000. Sou I need calculate checsums for MCU and write to eeprom. Buth where can I find info about eeprom maps? <img src="smile.gif" border="0">

Bootstrap · 08-07-2001, 00:39

Hi guys,

maybe for anybody will work this solutions:

Solution How to repair Phone failure for Siemens C30.

BEFORE any experiments, You must save backup eeprom from your phone !

Open backup of eeprom and if from addr 0 to 1FFF you will see only FF, copy eeprom from adr 2000 (in hex) to end of file and save it.

 Open good flash file in hex editor. Go to address F8000 and paste from this address saved block of eeprom (size 2000 bytes in hex), save this flash as new file. With sw from PRO write flash to phone.

Phone will be work!

Tested by me with c30 sw ver 2.2.0 flash ID A220.

I dont need any for exchange... <img src="wink.gif" border="0">

WBR Bootstrap

Bootstrap · 08-07-2001, 00:41

[ 07 August 2001: Message edited by: Bootstrap ]

asas · 08-07-2001, 11:25

I ndont have original eeprom.I have pushed read partial in fake program by pro (its was not by pro) and this have erased my phone memory. Now if i write original flash the phone dont turn on.

asas · 08-07-2001, 17:58

sorry I meen FATM not PRO program.

Own · 08-07-2001, 21:13

HELLO...BOOTSTRAP HOW CAN I REPAIR EEPROM WHITH C-M-S35,A35/36 SAME C30

Own · 08-07-2001, 21:16

BOOTSTRAP..AGAIN HOW CAN I SEE POSITION ID FOR IMEI IN THAT ALL THNX

ceedee · 08-08-2001, 18:55

i have a question for phone failure solution... I ave read eprom but first part of eprom dump is not FF's exacly second is FF's (excluding one F0 in first line...) I tried to use first part but doesn't give any effect... my version is 1.11.0 but i tried to use 2.2.0 flash and nothing... Please support

snk · 08-09-2001, 16:59

[quote]Originally posted by Bootstrap: Hi guys,

maybe for anybody will work this solutions:

Solution How to repair Phone failure for Siemens C30.

BEFORE any experiments, You must save backup eeprom from your phone !

Open backup of eeprom and if from addr 0 to 1FFF you will see only FF, copy eeprom from adr 2000 (in hex) to end of file and save it.<hr></blockquote>

 Some additions for my solution: If you will see from adr 0 to 1FFF some data, copy block from 0 to 1FFF and paste it to eeprom zone in flash.

 [quote] Open good flash file in hex editor. Go to address F8000 and paste from this address saved block of eeprom (size 2000 bytes in hex), save this flash as new file. With sw from PRO write flash to phone.

Phone will be work!

Tested by me with c30 sw ver 2.2.0 flash ID A220.

I dont need any for exchange... <img src="wink.gif" border="0">

WBR Bootstrap<hr></blockquote>

ceedee · 08-09-2001, 18:25

it doesn't work on my 2 siemenses....

Bigbrothers2000 · 08-10-2001, 23:01

i tryed f8000 but still phone failure i have eeprom dump file readed before i destroy the phone <img src="frown.gif" border="0"> (( what can i do for fix who now's <img src="frown.gif" border="0"> <img src="frown.gif" border="0">

Bigbrothers2000 · 08-11-2001, 18:54

nobody himmmm <img src="frown.gif" border="0"> (((((

08-06-2001, 16:45	#1 (permalink)
Florin Freak Poster Join Date: Jun 2001 Location: Romania Age: 50 Posts: 160 Member: 5044 Status: Offline Thanks Meter: 0	about C30 "Phone Failure" hi to all<br />i need a sol to repair my C30 "phone failure" I need too rom lang.package for C30<br />pls help me<br />best reagrds<br />Florin<br />[email protected]<br />ICQ:118890743

08-06-2001, 17:55	#3 (permalink)
asas Freak Poster Join Date: Jul 2001 Location: Lithuania Age: 43 Posts: 495 Member: 5198 Status: Offline Thanks Meter: 2	I have "phone failure" too.<br />It is posible to read from c30 eeprom? And the write to it?<br />I have full flashed butj still that program. I think problem is in eeprom.

08-07-2001, 00:39	#5 (permalink)
Bootstrap Freak Poster Join Date: Feb 2001 Location: Slum Age: 49 Posts: 211 Member: 3238 Status: Offline Thanks Meter: 0	Hi guys, maybe for anybody will work this solutions: Solution How to repair Phone failure for Siemens C30. BEFORE any experiments, You must save backup eeprom from your phone ! Open backup of eeprom and if from addr 0 to 1FFF you will see only FF, <br />copy eeprom from adr 2000 (in hex) to end of file and save it. <br />Open good flash file in hex editor.<br />Go to address F8000 and paste from this address saved <br />block of eeprom (size 2000 bytes in hex), save this flash as new file.<br />With sw from PRO write flash to phone. Phone will be work! Tested by me with c30 sw ver 2.2.0 flash ID A220. I dont need any for exchange... <img src="wink.gif" border="0"> WBR<br />Bootstrap

08-07-2001, 00:41	#6 (permalink)
Bootstrap Freak Poster Join Date: Feb 2001 Location: Slum Age: 49 Posts: 211 Member: 3238 Status: Offline Thanks Meter: 0	[ 07 August 2001: Message edited by: Bootstrap ]</p>

08-09-2001, 16:59	#12 (permalink)
snk Freak Poster Join Date: Jul 2001 Location: Ukraine Posts: 178 Member: 5150 Status: Offline Thanks Meter: 1	[quote]Originally posted by Bootstrap:<br /><strong>Hi guys, maybe for anybody will work this solutions: Solution How to repair Phone failure for Siemens C30. BEFORE any experiments, You must save backup eeprom from your phone ! Open backup of eeprom and if from addr 0 to 1FFF you will see only FF, <br />copy eeprom from adr 2000 (in hex) to end of file and save it.</strong><hr></blockquote> <br />Some additions for my solution:<br />If you will see from adr 0 to 1FFF some data, copy block from 0 to 1FFF and paste it to eeprom zone in flash. <br /> [quote]<strong><br />Open good flash file in hex editor.<br />Go to address F8000 and paste from this address saved <br />block of eeprom (size 2000 bytes in hex), save this flash as new file.<br />With sw from PRO write flash to phone. Phone will be work! Tested by me with c30 sw ver 2.2.0 flash ID A220. I dont need any for exchange... <img src="wink.gif" border="0"> WBR<br />Bootstrap</strong><hr></blockquote>

08-06-2001, 17:52	#2 (permalink)
te No Life Poster Join Date: Oct 2000 Location: Nearest pub Posts: 676 Member: 2357 Status: Offline Thanks Meter: 4	No problem. Solution for "phone failure" in exchange for bosch, siemens, sagem service manual, bosch or sagem flash software.

08-07-2001, 00:14	#4 (permalink)
asas Freak Poster Join Date: Jul 2001 Location: Lithuania Age: 43 Posts: 495 Member: 5198 Status: Offline Thanks Meter: 2	Now i know that eeprom start from F8000. Sou I need calculate checsums for MCU and write to eeprom. Buth where can I find info about eeprom maps? <img src="smile.gif" border="0">

08-07-2001, 11:25	#7 (permalink)
asas Freak Poster Join Date: Jul 2001 Location: Lithuania Age: 43 Posts: 495 Member: 5198 Status: Offline Thanks Meter: 2	I ndont have original eeprom.I have pushed read partial in fake program by pro (its was not by pro) and this have erased my phone memory. Now if i write original flash the phone dont turn on.

08-07-2001, 17:58	#8 (permalink)
asas Freak Poster Join Date: Jul 2001 Location: Lithuania Age: 43 Posts: 495 Member: 5198 Status: Offline Thanks Meter: 2	sorry I meen FATM not PRO program.

08-07-2001, 21:13	#9 (permalink)
Own No Life Poster Join Date: Aug 2001 Location: Minsk Russia Posts: 915 Member: 5569 Status: Offline Thanks Meter: 10	HELLO...BOOTSTRAP HOW CAN I REPAIR EEPROM WHITH C-M-S35,A35/36 SAME C30

08-07-2001, 21:16	#10 (permalink)
Own No Life Poster Join Date: Aug 2001 Location: Minsk Russia Posts: 915 Member: 5569 Status: Offline Thanks Meter: 10	BOOTSTRAP..AGAIN HOW CAN I SEE POSITION ID FOR IMEI IN THAT ALL THNX

08-08-2001, 18:55	#11 (permalink)
ceedee No Life Poster Join Date: Jul 2001 Location: PL Age: 41 Posts: 656 Member: 5268 Status: Offline Thanks Meter: 24	i have a question for phone failure solution... I ave read eprom but first part of eprom dump is not FF's exacly second is FF's (excluding one F0 in first line...) I tried to use first part but doesn't give any effect... my version is 1.11.0 but i tried to use 2.2.0 flash and nothing... Please support

08-09-2001, 18:25	#13 (permalink)
ceedee No Life Poster Join Date: Jul 2001 Location: PL Age: 41 Posts: 656 Member: 5268 Status: Offline Thanks Meter: 24	it doesn't work on my 2 siemenses....

08-10-2001, 23:01	#14 (permalink)
Bigbrothers2000 No Life Poster Join Date: Sep 1999 Location: Europe Age: 51 Posts: 1,378 Member: 487 Status: Offline Thanks Meter: 65	i tryed f8000 but still phone failure <br />i have eeprom dump file<br />readed before i destroy the phone <img src="frown.gif" border="0"> ((<br />what can i do for fix who now's <img src="frown.gif" border="0"> <img src="frown.gif" border="0">

08-11-2001, 18:54	#15 (permalink)
Bigbrothers2000 No Life Poster Join Date: Sep 1999 Location: Europe Age: 51 Posts: 1,378 Member: 487 Status: Offline Thanks Meter: 65	nobody himmmm <img src="frown.gif" border="0"> (((((

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Siemens C30 "Phone Failure"	Lukas123	NON Siemens Brand (ODM Phones)	4	11-25-2001 12:09
siemens c30 "phone failure"	anry	NON Siemens Brand (ODM Phones)	5	11-04-2001 11:34
Siemens C30 "Phone Failure"	Martin Borman	NON Siemens Brand (ODM Phones)	3	08-07-2001 11:23
c30 "phone failure" solution for exchange	te	NON Siemens Brand (ODM Phones)	1	07-31-2001 08:31
Repair "Phone failure" in C30	geosan1638	NON Siemens Brand (ODM Phones)	0	07-11-2001 21:52