Auto Power ON & OFF - GSM-Forum

FredL · 06-24-2003, 18:26

To use an SL45i on a motorbike I'm trying to build a custom adaptator that automaticly switch on the mobile when the key is turn on but also automaticly switch off the phone when I take the key away....

Any idea ?

Thanks anyway

FL

Shibby86 · 06-24-2003, 22:37

this one is complicated.

I know a methode for switching it off but you have to work it out. Also, this one isn't the best methode to switch the phone off but when you connect pin 1 and 4 for just a moment the phone switches off not on the normal way but just off. I had it sometimes when I was soldering a new accesoires.
I think switching the phone on is more diffecult but I know that programs like swup can power on the phone. If somebody have this little peace of code you could make a little chip who does this when it have a little bit power (ex. when you turn your key).

I hope somebody else knows a better solution.

greetzz

FredL · 06-25-2003, 08:58

Thanks a lot.

Bur I've seen this phone doing that when connected to the "Siemens car kit" so it must be posible ...

FL

FredL · 06-26-2003, 16:06

I've tested your shorcut between 1 and 4 but the battery need to be taken away to make the phone comme back on ... that's not good for me ..

Does anybody have the full wiring and profile from the car kit ?

Thanks
FL

elomda · 06-28-2003, 10:12

the siemens car kit turns on a turned off phone when u insert in a cradle,i have the car kit professional voice in my car

FredL · 06-28-2003, 15:46

That's exactly what i'm trying to do but not using the full car kit because it is for a motorcycle, and I do already have a working interface for the (mic+speaker) kit but now I'm trying to make it switch on when engine start and of course off when the engine stop. ( like with the car kit...)

thanks

FL

Enki · 05-18-2006, 21:02

Had someone find a solution for auto turn on the phone?

lalo.lerry · 05-22-2006, 23:33

Yes, see "turn on when charged" patch in SL45 flash patches thread

sassaki · 10-26-2006, 19:06

weld in the micro.

06-24-2003, 18:26	#1 (permalink)
FredL Junior Member Join Date: May 2003 Posts: 19 Member: 28740 Status: Offline Thanks Meter: 0	Auto Power ON & OFF To use an SL45i on a motorbike I'm trying to build a custom adaptator that automaticly switch on the mobile when the key is turn on but also automaticly switch off the phone when I take the key away.... Any idea ? Thanks anyway FL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
auto Power On & No Keypad Working Solution For China Sets	mobileland139	Chinese Models & Cloned Phones	16	12-01-2016 12:17
7210c auto power on & auto charging	ranem_111	Nokia Hardware & Hardware Repair	1	02-07-2010 12:31
V3i auto power on & 3,4 can't work	jabed_net	Motorola Hardware Repair	1	03-02-2009 19:14
V3 Auto Power on then on/off button not work	.:Towhid:.	Motorola Hardware Repair	2	08-01-2007 12:09
very usefull solution for Nokia 3310 auto power ON/off	GSM SNIPER	Nokia Hardware & Hardware Repair	4	07-03-2004 20:51

06-24-2003, 22:37	#2 (permalink)
Shibby86 Freak Poster Join Date: Apr 2003 Location: the Netherlands Posts: 126 Member: 26889 Status: Offline Thanks Meter: 1	this one is complicated. I know a methode for switching it off but you have to work it out. Also, this one isn't the best methode to switch the phone off but when you connect pin 1 and 4 for just a moment the phone switches off not on the normal way but just off. I had it sometimes when I was soldering a new accesoires. I think switching the phone on is more diffecult but I know that programs like swup can power on the phone. If somebody have this little peace of code you could make a little chip who does this when it have a little bit power (ex. when you turn your key). I hope somebody else knows a better solution. greetzz

06-25-2003, 08:58	#3 (permalink)
FredL Junior Member Join Date: May 2003 Posts: 19 Member: 28740 Status: Offline Thanks Meter: 0	Thanks a lot. Bur I've seen this phone doing that when connected to the "Siemens car kit" so it must be posible ... FL

06-26-2003, 16:06	#4 (permalink)
FredL Junior Member Join Date: May 2003 Posts: 19 Member: 28740 Status: Offline Thanks Meter: 0	I've tested your shorcut between 1 and 4 but the battery need to be taken away to make the phone comme back on ... that's not good for me .. Does anybody have the full wiring and profile from the car kit ? Thanks FL

06-28-2003, 10:12	#5 (permalink)
elomda Crazy Poster Join Date: Apr 2003 Location: EGYPT Posts: 57 Member: 26594 Status: Offline Thanks Meter: 0	the siemens car kit turns on a turned off phone when u insert in a cradle,i have the car kit professional voice in my car

06-28-2003, 15:46	#6 (permalink)
FredL Junior Member Join Date: May 2003 Posts: 19 Member: 28740 Status: Offline Thanks Meter: 0	That's exactly what i'm trying to do but not using the full car kit because it is for a motorcycle, and I do already have a working interface for the (mic+speaker) kit but now I'm trying to make it switch on when engine start and of course off when the engine stop. ( like with the car kit...) thanks FL

05-18-2006, 21:02	#7 (permalink)
Enki Junior Member Join Date: Mar 2006 Posts: 10 Member: 243267 Status: Offline Thanks Meter: 0	Had someone find a solution for auto turn on the phone?

05-22-2006, 23:33	#8 (permalink)
lalo.lerry No Life Poster Join Date: Jan 2004 Location: Italy Age: 49 Posts: 1,018 Member: 50673 Status: Offline Thanks Meter: 2	Yes, see "turn on when charged" patch in SL45 flash patches thread

10-26-2006, 19:06	#9 (permalink)
sassaki Freak Poster Join Date: Jul 2005 Location: Brazil Age: 43 Posts: 288 Member: 159096 Status: Offline Thanks Meter: 48	weld in the micro.