S25 dead v44 - GSM-Forum

Flex77 · 08-24-2001, 14:57

Hi I have S25 v44 dead after wrong unlocking cable. Now i try to flash it with v42 v43 v44 but after flashing a phone not powre on... (flasher say : flashing succesfull, but the mobile SW is ...bla-bla..) Can anybody help me . Any Idea ?

Own · 08-25-2001, 15:47

you must try sw andromeda v6.0 or v6.1 first and after tell me again...see you <img src="mad.gif" border="0"> <img src="mad.gif" border="0">

hacker1gsm · 08-25-2001, 15:51

hi try andromeda with option repair and follow the program if not power on replay

regards

Winner58 · 08-26-2001, 11:06

Hi try it with bartek 1.6 after repair with andromeda 6.x you have no network!!! regards Winner58

Flex77 · 08-27-2001, 08:26

Hi , i have try to flash v12 v14 v42 v44 and after this phone only lights. No "Wrong soft" !!! After this i try to repair using Andromeda or Bartek, but nothing. Bartek display :

Repairing, Please wait ... Write O.K, Wait.. Power ON (and now i can't power on the phone..) Timeout

Any idea. With Andromeda is the same. I was tryed to repair all25, but no success !!!

Best regards: Vesselin

Vasuk · 08-27-2001, 08:46

Downgrade it to v12, then use Bartek 1.92 repair, then if the phone turnes on, it will not see the network. Use all25 to repair it. It's a 100% working solution.

Best regards, Vasuk&Co

GURO · 08-27-2001, 09:25

flash it with swup v44 when flash will erase diskonect cabel flash it with v12 than repaier and flash it with v44 if no resoult replay or mail me

Flex77 · 08-28-2001, 10:29

No result, Phone is still dead. I can see thaat phone go to service mode (that say program Koce 5.3 and all25), but on screen is onli light, no display "Service mode"

 Best regards: Vesselin ICQ 13843159 [email protected]

Flex77 · 08-28-2001, 19:36

Yes it works again !!! I have flashed again v12 and now phone display "wrong battery". Any solution

Flex77 · 08-30-2001, 08:01

After flashing v12, again v42 (and using Bartek 1.92 , all25 to repair)phone work (pressing left button going to Demo) but cannot see on display. All programms connect succesfull to phone. Using Bartek 1.92 i can change contrast but have no result. After leaving about 2 h in standby phone weak up and work perfectly. But when i desconnect a battery again is dead and i must wait again 2 h. Any sollution ?

When using ALL25 phone on 2 step phone going to service mode, but on step 16 (i think) ALL25 say EEFULL (error bei schreiben block 66). What mean this. When I flash v12 or v42 all program say that this phone have v05 ?

Can you help me. Any idea ?

08-24-2001, 14:57	#1 (permalink)
Flex77 Junior Member Join Date: Mar 2001 Location: BG Posts: 17 Member: 3575 Status: Offline Thanks Meter: 0	S25 dead v44 Hi I have S25 v44 dead after wrong unlocking cable. Now i try to flash it with v42 v43 v44 but after flashing a phone not powre on... (flasher say : flashing succesfull, but the mobile SW is ...bla-bla..) <br />Can anybody help me . Any Idea ?

08-25-2001, 15:51	#3 (permalink)
hacker1gsm No Life Poster Join Date: Jul 2001 Location: EGYPT Age: 46 Posts: 966 Member: 5113 Status: Offline Thanks Meter: 10	hi<br />try andromeda with option repair <br />and follow the program <br />if not power on replay regards

08-26-2001, 11:06	#4 (permalink)
Winner58 Member deceased !! Join Date: May 1999 Location: Wien/Austria Age: 65 Posts: 13,150 Member: 5 Status: Offline Thanks Meter: 1,884	Hi<br />try it with bartek 1.6<br />after repair with andromeda 6.x you have no network!!!<br />regards<br />Winner58 __________________ read the Rules carefully!!! wbr Winner 58

08-27-2001, 08:26	#5 (permalink)
Flex77 Junior Member Join Date: Mar 2001 Location: BG Posts: 17 Member: 3575 Status: Offline Thanks Meter: 0	Hi ,<br />i have try to flash v12 v14 v42 v44 and after this phone only lights. No "Wrong soft" !!! After this i try to repair using Andromeda or Bartek, but nothing. Bartek display : Repairing, Please wait ...<br />Write O.K, Wait..<br />Power ON (and now i can't power on the phone..)<br />Timeout Any idea.<br />With Andromeda is the same. <br />I was tryed to repair all25, but no success !!! Best regards: Vesselin

08-27-2001, 09:25	#7 (permalink)
GURO Freak Poster Join Date: Jul 2001 Age: 48 Posts: 325 Member: 5375 Status: Offline Thanks Meter: 1	flash it with swup v44 when flash will erase diskonect cabel flash it with v12 <br />than repaier and flash it with v44<br />if no resoult replay or mail me

08-25-2001, 15:47	#2 (permalink)
Own No Life Poster Join Date: Aug 2001 Location: Minsk Russia Posts: 915 Member: 5569 Status: Offline Thanks Meter: 10	you must try sw andromeda v6.0 or v6.1 first and after tell me again...see you <img src="mad.gif" border="0"> <img src="mad.gif" border="0">

08-27-2001, 08:46	#6 (permalink)
Vasuk Freak Poster Join Date: Jul 2001 Location: Moscow Age: 42 Posts: 265 Member: 5568 Status: Offline Thanks Meter: 1	Downgrade it to v12, then use Bartek 1.92 repair, then if the phone turnes on, it will not see the network. Use all25 to repair it. It's a 100% working solution. Best regards, Vasuk&Co

08-28-2001, 10:29	#8 (permalink)
Flex77 Junior Member Join Date: Mar 2001 Location: BG Posts: 17 Member: 3575 Status: Offline Thanks Meter: 0	No result, Phone is still dead. <br />I can see thaat phone go to service mode (that say program Koce 5.3 and all25), but on screen is onli light, no display "Service mode" <br />Best regards: Vesselin<br />ICQ 13843159 <br />[email protected]

08-28-2001, 19:36	#9 (permalink)
Flex77 Junior Member Join Date: Mar 2001 Location: BG Posts: 17 Member: 3575 Status: Offline Thanks Meter: 0	Yes it works again !!!<br />I have flashed again v12 and now phone display "wrong battery". Any solution

08-30-2001, 08:01	#10 (permalink)
Flex77 Junior Member Join Date: Mar 2001 Location: BG Posts: 17 Member: 3575 Status: Offline Thanks Meter: 0	After flashing v12, again v42 (and using Bartek 1.92 , all25 to repair)phone work (pressing left button going to Demo) but cannot see on display. All programms connect succesfull to phone. Using Bartek 1.92 i can change contrast but have no result. After leaving about 2 h in standby phone weak up and work perfectly. But when i desconnect a battery again is dead and i must wait again 2 h.<br />Any sollution ? When using ALL25 phone on 2 step phone going to service mode, but on step 16 (i think) ALL25 say EEFULL (error bei schreiben block 66). What mean this. When I flash v12 or v42 all program say that this phone have v05 ? Can you help me. Any idea ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
s25 dead!!	foi4	x1x to x45/x50	17	07-08-2002 00:48
New question about s25 dead... HELP!!!	mitkiss	x1x to x45/x50	3	07-07-2002 22:18
S25 dead after upgrading with swup	Scorpy	x1x to x45/x50	8	06-01-2002 17:51
Is my s25 dead ? help!	sickboy73	x1x to x45/x50	1	03-04-2002 22:29
s25 dead	pau	x1x to x45/x50	2	07-14-2000 00:15