smd components - GSM-Forum

EciRuam · 01-26-2005, 14:24

Hi,

I got the sl45 from a friend. The phone itselfs is good. The only thing that is
wrong is that the mmc card doesn't work

. My friend opened the phone
and removed 1 or 2 smd components. Why I don't know.
These components should be in the red cirkel.
I think its a resistor and/or capacitor. I want to know the values of these
components (in the red cirkel) so that I can make it work again (I hope

).
If that is possible.

thx

EciRuam · 01-28-2005, 18:19

Does anyone has a electric scheme of the inside
of the phone?

137parth · 01-28-2005, 19:05

they are the capacitor and it works for power pls resolder it with ****er and it work 100%

abomin · 02-02-2005, 07:07

Code:

TOP
.
.
.
Resistor 10 kOhm
Resistor 100 Ohm
Capacitor - unnecessary
Resistor 100 kOhm
BOTTOM

-+8+- · 04-21-2006, 15:04

Hello to all.
I have a similar problem:
MMC is unformattable, and phone can't access any MMC, even new one.
For the MMC damaged I found answer in another thread.
The image cited in this thread was removed from the server.
Does anyone has that image, and/or schematic of SL45?
Thanks in advance.
-+8+-

01-26-2005, 14:24	#1 (permalink)
EciRuam Junior Member Join Date: Jan 2005 Age: 41 Posts: 2 Member: 110104 Status: Offline Thanks Meter: 0	smd components Hi, I got the sl45 from a friend. The phone itselfs is good. The only thing that is wrong is that the mmc card doesn't work . My friend opened the phone and removed 1 or 2 smd components. Why I don't know. These components should be in the red cirkel. I think its a resistor and/or capacitor. I want to know the values of these components (in the red cirkel) so that I can make it work again (I hope ). If that is possible. thx

02-02-2005, 07:07	#4 (permalink)
abomin Freak Poster Join Date: Jan 2004 Location: Russia inc. Age: 51 Posts: 121 Member: 48199 Status: Offline Thanks Meter: 0	Code: TOP . . . Resistor 10 kOhm Resistor 100 Ohm Capacitor - unnecessary Resistor 100 kOhm BOTTOM

04-21-2006, 15:04	#5 (permalink)
-+8+- Junior Member Join Date: Nov 2005 Posts: 27 Member: 198561 Status: Offline Thanks Meter: 0	SMD components and MMC access problem Hello to all. I have a similar problem: MMC is unformattable, and phone can't access any MMC, even new one. For the MMC damaged I found answer in another thread. The image cited in this thread was removed from the server. Does anyone has that image, and/or schematic of SL45? Thanks in advance. -+8+-

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Treo 650 with SMD component fallen out	szgabor	PalmOS /HP and others	1	04-16-2008 20:21
SMD EEPROM programmer with SOIC Clips (nokias full flash!)	mckalinagsm	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	02-16-2002 12:58
Bosch eprom reader and writer by SMD	Hanukkah	Various	17	12-13-2001 19:04
is it possible to use a SMD programmer 2 change languages	reo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-11-2001 23:52
Where to find SMD connector for pony program	FSC	Hardware Repair by brands	0	04-30-2001 19:34

01-28-2005, 18:19	#2 (permalink)
EciRuam Junior Member Join Date: Jan 2005 Age: 41 Posts: 2 Member: 110104 Status: Offline Thanks Meter: 0	Does anyone has a electric scheme of the inside of the phone?

01-28-2005, 19:05	#3 (permalink)
137parth Freak Poster Join Date: Mar 2004 Location: chasing noodles and chopsticks Posts: 136 Member: 59228 Status: Offline Thanks Meter: 13	they are the capacitor and it works for power pls resolder it with ****er and it work 100%