a70 hangs on startup after unlock - GSM-Forum

Microemission · 10-15-2005, 23:01

I did test point as described on A70TSP.jpg and then unlocked it with JokerV005 and it say
Start...
Loading Boots...
Sending StartBoot Ok.
Sending Boot2 Ok.
Sending Boot3 Ok.
Sending MainBoot Ok.
FlashID: 0001227E
IMEI: 35634xx089xxxx
FSN: C33000EF -> PhoneID: EF0030C3
HASH: 4AC278BE9DC9777F33FCC4BCCDB15675
Write New EEPBlock 76,5008,5009,5077 Ok.
Boot terminated.
UnLock Ok!

But after it only hangs on start up, on message "Siemens be inspired"!
What can be done on this phone?
Does the Tp cut need to be redone?
Software version on this phone was v14.
Tkx

systemworm · 10-16-2005, 10:17

Quote:

Originally Posted by Microemission

I did test point as described on A70TSP.jpg and then unlocked it with JokerV005 and it say
Start...
Loading Boots...
Sending StartBoot Ok.
Sending Boot2 Ok.
Sending Boot3 Ok.
Sending MainBoot Ok.
FlashID: 0001227E
IMEI: 35634xx089xxxx
FSN: C33000EF -> PhoneID: EF0030C3
HASH: 4AC278BE9DC9777F33FCC4BCCDB15675
Write New EEPBlock 76,5008,5009,5077 Ok.
Boot terminated.
UnLock Ok!

But after it only hangs on start up, on message "Siemens be inspired"!
What can be done on this phone?
Does the Tp cut need to be redone?
Software version on this phone was v14.
Tkx

Just try to unlock it again 2 or 3 times.

Microemission · 10-16-2005, 15:56

Tkx systemworm!
Tried unlocking it many times now, but it's still hanging at startup

Maybe downgrading or upgrading the soft, it will be ok again? Or that isnt the problem?

Chris02 · 10-16-2005, 16:35

I think I'll sticky this thread because I belive that in future more user will have the same problem and we need to find a Solution!

byteforce · 10-16-2005, 18:44

I did a V13 successfully too, but on a V14 phone after unlock the phone didn't powered on anymore. So I just reworked somehow on PCB trying to recover the testpoint like it was before, thinking that I scratched very deep, and after that, voila,,, the phone starts and works great too.

Piratos · 10-16-2005, 19:23

HeHe . . that always the pb with free $hit . .

Better use originalle good products with support

WBR

soma1 · 10-17-2005, 11:14

v16 with version joker007 kiled but vith version 001 live again

v14 vith version 001 kiled but vith version 007 live....

That mine expiriance and bout models now working...

Best regards form RS

vbfather · 10-17-2005, 14:12

same problem with me how to downgrade to v13
help

ARAB GSM · 10-20-2005, 09:33

please help, can any body send me picture solution for a70 bad cut repair,i have two a70 phones dead after bad cut please help.
thanks in advance

Siemens man · 10-21-2005, 00:24

hi guys
i have same problem after unlock phone turn on and freez. i now how resolve problem
good luck to all

systemworm · 10-21-2005, 18:38

Quote:

Originally Posted by Siemens man

hi guys
i have same problem after unlock phone turn on and freez. i now.
good luck to all

Try to flash it with sst5.32
U can read flash as other phone.4 or 8 mb no matter

Microemission · 10-23-2005, 23:04

Tried reading it with A65, but it hangs on "Entering Boot Mode"

systemworm · 10-24-2005, 19:10

Quote:

Originally Posted by Microemission

Tried reading it with A65, but it hangs on "Entering Boot Mode"

U just need to do test point

Microemission · 10-25-2005, 17:01

Test point is done! Or else joker wouldnt work.

hacktek · 10-26-2005, 22:24

Quote:

Originally Posted by Piratos

HeHe . . that always the pb with free $hit . .
Better use originalle good products with support

WBR

Bull****! There is no good support for anything! There is no good support for RedBox, for Twister, for Griffin.. The only good support now is for Vygis Toolbox.
The major boxes are cracked now.. so why are U talking? Because U bought Marteck or SST, and U want a proof that U used your money well? U think U have made a "good" investment?

U're wrong, my friend!!
I unlocked today two pieces of A70, with Joker007! The first was ver.13, the second one was ver.16. I used joker005 for the first one, and joker007 for the second one! Both phones are working without any problem!
Just do the right testpoint!

Last week someone brought a dead a70 to me, and I will try to repair it with SST cracked! If it will work, I will post here the results!

10-15-2005, 23:01	#1 (permalink)
Microemission Major Poster Join Date: Mar 2004 Age: 44 Posts: 42 Member: 59662 Status: Offline Thanks Meter: 1	a70 hangs on startup after unlock I did test point as described on A70TSP.jpg and then unlocked it with JokerV005 and it say Start... Loading Boots... Sending StartBoot Ok. Sending Boot2 Ok. Sending Boot3 Ok. Sending MainBoot Ok. FlashID: 0001227E IMEI: 35634xx089xxxx FSN: C33000EF -> PhoneID: EF0030C3 HASH: 4AC278BE9DC9777F33FCC4BCCDB15675 Write New EEPBlock 76,5008,5009,5077 Ok. Boot terminated. UnLock Ok! But after it only hangs on start up, on message "Siemens be inspired"! What can be done on this phone? Does the Tp cut need to be redone? Software version on this phone was v14. Tkx

10-21-2005, 00:24	#10 (permalink)
Siemens man No Life Poster Join Date: Apr 2001 Location: IN CASTLE Age: 46 Posts: 5,798 Member: 3925 Status: Offline Thanks Meter: 22	hi guys i have same problem after unlock phone turn on and freez. i now how resolve problem good luck to all Last edited by Siemens man; 10-22-2005 at 03:36.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
D980 hangs on startup after flashing	_aZzz	NSPRO	0	07-03-2009 16:20
LG TE365 Hang on Startup after Entering Codes	lahoot	LG	3	06-30-2009 17:18
EL71 hang on startup after write fullflash without bootcore any help ??	wgmmmx	DreamBox	1	01-20-2007 20:16
e530 hangs on startup, after fullflash...	microtel	Trident/AGERE Platform	5	12-19-2005 11:29
Z1010 hangs on "Searching" after unlock	shakeelajmal	Sony Ericsson	0	07-14-2005 10:32

10-16-2005, 15:56	#3 (permalink)
Microemission Major Poster Join Date: Mar 2004 Age: 44 Posts: 42 Member: 59662 Status: Offline Thanks Meter: 1	Tkx systemworm! Tried unlocking it many times now, but it's still hanging at startup Maybe downgrading or upgrading the soft, it will be ok again? Or that isnt the problem?

10-16-2005, 16:35	#4 (permalink)
Chris02 No Life Poster Join Date: Oct 2003 Location: Germany Age: 37 Posts: 5,196 Member: 41076 Status: Offline Thanks Meter: 53	I think I'll sticky this thread because I belive that in future more user will have the same problem and we need to find a Solution!

10-16-2005, 18:44	#5 (permalink)
byteforce Cheater -Don't Deal with him- Join Date: Feb 2003 Location: gsmcity Age: 44 Posts: 3,009 Member: 21296 Status: Offline Thanks Meter: 328	I did a V13 successfully too, but on a V14 phone after unlock the phone didn't powered on anymore. So I just reworked somehow on PCB trying to recover the testpoint like it was before, thinking that I scratched very deep, and after that, voila,,, the phone starts and works great too.

10-16-2005, 19:23	#6 (permalink)
Piratos Freak Poster Join Date: Apr 2004 Location: Spain . . Ceuta Age: 54 Posts: 98 Member: 60817 Status: Offline Thanks Meter: 0	HeHe . . that always the pb with free $hit . . Better use originalle good products with support WBR

10-17-2005, 11:14	#7 (permalink)
soma1 Insane Poster Join Date: Apr 2005 Location: Republic of SRPSKA Age: 47 Posts: 58 Member: 140697 Status: Offline Thanks Meter: 0	v16 with version joker007 kiled but vith version 001 live again v14 vith version 001 kiled but vith version 007 live.... That mine expiriance and bout models now working... Best regards form RS

10-17-2005, 14:12	#8 (permalink)
vbfather No Life Poster Join Date: Feb 2005 Location: Nostalgia... Age: 41 Posts: 514 Member: 121728 Status: Offline Thanks Meter: 38	same problem with me how to downgrade to v13 help

10-20-2005, 09:33	#9 (permalink)
ARAB GSM No Life Poster Join Date: Sep 2005 Location: West Africa Ghana Age: 15 Posts: 2,256 Member: 180675 Status: Offline Sonork: 100.111161 Thanks Meter: 411	please help, can any body send me picture solution for a70 bad cut repair,i have two a70 phones dead after bad cut please help. thanks in advance

10-23-2005, 23:04	#12 (permalink)
Microemission Major Poster Join Date: Mar 2004 Age: 44 Posts: 42 Member: 59662 Status: Offline Thanks Meter: 1	Tried reading it with A65, but it hangs on "Entering Boot Mode"

10-25-2005, 17:01	#14 (permalink)
Microemission Major Poster Join Date: Mar 2004 Age: 44 Posts: 42 Member: 59662 Status: Offline Thanks Meter: 1	Test point is done! Or else joker wouldnt work.