Siemens A60, C60, etc BZZZZZ on power - GSM-Forum

moder10 · 02-08-2008, 13:38

Hi guys,
when i try to turn on the mobiles SIEMENS A60, the mobile make "bzzzzz" and than turn off automatically.

Please help me...let me know what do i have to do.

Br, Moder

PS:::: this is the log

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 39 (A60)
A60 lg1 Sw27 08.07.04 10:18:58
IMEI: **************
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3887 mV.
SecurityMode: Customer

moder10 · 02-08-2008, 13:48

Hi guys,
when i try to turn on the mobiles SIEMENS C60, the display appear all blu and nothing happen, so i have excluded the display broken....i think is dead

, so help me to make it survive.

Please help me...let me know what do i have to do.

Br, Moder

PS:::: this is the log

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 40 (C60)
C60 lg95 Sw12 26.09.03 12:17:03
IMEI: **************
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3869 mV.
SecurityMode: Customer

ABOUSHADY · 02-08-2008, 13:48

Reflsh With Joker And Defrag Eepr

moder10 · 02-08-2008, 14:57

Quote:

Originally Posted by W][e][R

Reflsh With Joker And Defrag Eepr

I tried to FLASH but this is the log....what do i have to do????

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 39 (A60)
A60 lg1 Sw27 08.07.04 10:18:58
IMEI: ***************
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3872 mV.
SecurityMode: Customer
Phone off...
Open file "C:\Unlock siemens\A60\A60_16_fullflash_tr\a60_v16_fullflash_ tr\a60_v16_fullflash.bin" for write in Flash.
FullFlash file info:
FlashID: 0001/220C
SIEMENS A60 Sw16 lg4
RealLgPack: lg4
Start...
Loading BootsModel(A60)...
StartBoot does not answer!

I have done the DEFRAG,,,and this is the log:

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 39 (A60)
A60 lg1 Sw27 08.07.04 10:18:58
IMEI: ************
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3874 mV.
SecurityMode: Customer
Backup EEPROM blocks...
SecurityMode: Customer
Work only in FactoryMode! Use Skey!
HWID: 39 (A60)
EELITE Info: free buffer 51232 bytes, free at all 55572 bytes, free for deleted 55572 bytes.
EEFULL Info: free buffer 87510 bytes, free at all 87722 bytes, free for deleted 22330 bytes.
Read All EELITE blocks from 1 to 285 ...
Read All EEFULL blocks from 5000 to 5408 ...
Ñ÷èòàíî âñåãî EEP áëîêîâ: 378 øò.
Backup Blocks saved in ".\Backup\A60lg1Sw27_Backup080208145943.eep" file.
Format EELITE...
EELITE Info: free buffer 65360 bytes, free at all 65392 bytes, free for deleted 65392 bytes.
Write 182 EELITE blocks...
Format EEFULL...
EEFULL Info: free buffer 87362 bytes, free at all 87722 bytes, free for deleted 22330 bytes.
Write 196 EEFULL blocks...
EELITE Info: free buffer 55540 bytes, free at all 55572 bytes, free for deleted 55572 bytes.
EEFULL Info: free buffer 44912 bytes, free at all 87722 bytes, free for deleted 22330 bytes.
Defrag EEPROM blocks - Ok.

Br, Moder

moder10 · 02-08-2008, 15:57

Hi guys,
when i try to turn on the mobiles SIEMENS MC60, the display appear all blu and the mobile make BZZZZ then it turn off automatically.

Please help me...let me know what do i have to do.

This is the log:
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 132 (MC60)
MC60 lg95 Sw05 17.09.03 12:23:47
IMEI: ******************
DisplayID: 0, Unknown or misses
Code(05): OTP closed
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3841 mV.
SecurityMode: Customer

Br, Moder

valiu · 02-08-2008, 16:03

write a full flash and after that do repair

dagos · 02-08-2008, 17:04

Quote:

Originally Posted by moder10

Hi guys,
when i try to turn on the mobiles SIEMENS MC60, the display appear all blu and the mobile make BZZZZ then it turn off automatically.

Please help me...let me know what do i have to do.

This is the log:
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 132 (MC60)
MC60 lg95 Sw05 17.09.03 12:23:47
IMEI: ******************
DisplayID: 0, Unknown or misses
Code(05): OTP closed
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3841 mV.
SecurityMode: Customer

Br, Moder

...hmmm!
Use fullflash for Joker, flash and unlock after.
Download "MC60_0704_full_repair.rar" from: http://eh.student.utwente.nl/~landy/...r=Repair_FuBu/
user: mobile
password: elibom

P.S. Is possible to have the hardware problem regarding to display...
Br,
dagos

moder10 · 02-08-2008, 19:56

Quote:

Originally Posted by dagos

...hmmm!
Use fullflash for Joker, flash and unlock after.
Download "MC60_0704_full_repair.rar" from: http://eh.student.utwente.nl/~landy/...r=Repair_FuBu/
user: mobile
password: elibom

P.S. Is possible to have the hardware problem regarding to display...
Br,
dagos

I try to make FULLFLASH, but mobile ask me usually:

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
HWID: 132 (MC60)
MC60 lg95 Sw05 17.09.03 12:23:47
IMEI: *********
DisplayID: 0, Unknown or misses
Code(05): OTP closed
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3850 mV.
SecurityMode: Customer
Open file "C:\MC60\MC60_FullFlash\MC60_FullFlash.bin" for write in Flash.
FullFlash file info not valid!
Start...
Loading BootsModel(MC60)...
StartBoot does not answer!

What do i have to do?

moder10 · 02-08-2008, 20:16

Do i have to make a cut for FULLFLASH of MC60???

Br, Moder

moder10 · 02-08-2008, 20:36

Do i have to make a cut for FULLFLASH of C60???

Br, Moder

moder10 · 02-08-2008, 20:37

Do i have to make a cut for FULLFLASH of A60???

Br, Moder

Crumarix1 · 02-08-2008, 20:46

Yes,and use freia...it's easyest

du u open an oldsiemensService,or u discower a siemens factory garbage ????

Crumarix1 · 02-08-2008, 20:48

did u try Contast tool for Siemens,usualy after flash u need to setup contrast level...

and yes u need to do CUT...

du u ewer read old post before u posting ???

moder10 · 02-08-2008, 21:47

Quote:

Originally Posted by Crumarix1

Yes,and use freia...it's easyest

du u open an oldsiemensService,or u discower a siemens factory garbage ????

May i know the cut for siemens a60...where is?
Many thanks

moder10 · 02-08-2008, 22:03

Quote:

Originally Posted by Crumarix1

Yes,and use freia...it's easyest

du u open an oldsiemensService,or u discower a siemens factory garbage ????

May i know the cut for siemens a60...where is?
Many thanks

Using FREIA...without cut.........this is the log:

FREIA - Engine build 10, Frontend build 9
Thanks goes out for the following:
Maxim, Rolis, Sergey, PapaJoe, Lead,
TheWizard, Jozso (for hardware and cable
support and of course beta testing),
Nico, Victor, Pinker, Tom,
and all the others who supports ...
COMM_LoadBoots : selected phone family is 13
TTY_OpenCOMPort : opening COM1
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_SendBoot : boot file is not accepted

Moder

02-08-2008, 13:38	#1 (permalink)
moder10 Insane Poster Join Date: Dec 2007 Location: Italy Posts: 77 Member: 650401 Status: Offline Thanks Meter: 2	Siemens A60, C60, etc BZZZZZ on power Hi guys, when i try to turn on the mobiles SIEMENS A60, the mobile make "bzzzzz" and than turn off automatically. Please help me...let me know what do i have to do. Br, Moder PS:::: this is the log Start... Loading ServiceBoot... Sending ServiceBoot Ok. HWID: 39 (A60) A60 lg1 Sw27 08.07.04 10:18:58 IMEI: ************** DisplayID: 37, Philips Epson S1D15G14 Code(05): OTP closed Code(08): BootKEY is unknown Code(0D): Keys are registered in BCORE Code(10): Minimal access to BFB Code(15): Complete condition Code(19): Monitoring is switched on Code(1D): Blocks 5121,5122,5123 are present Battery Voltage 3887 mV. SecurityMode: Customer

02-08-2008, 13:48	#2 (permalink)
moder10 Insane Poster Join Date: Dec 2007 Location: Italy Posts: 77 Member: 650401 Status: Offline Thanks Meter: 2	Siemens C60.....Display blu and the mobile don't start Hi guys, when i try to turn on the mobiles SIEMENS C60, the display appear all blu and nothing happen, so i have excluded the display broken....i think is dead , so help me to make it survive. Please help me...let me know what do i have to do. Br, Moder PS:::: this is the log Start... Loading ServiceBoot... Sending ServiceBoot Ok. HWID: 40 (C60) C60 lg95 Sw12 26.09.03 12:17:03 IMEI: ************** DisplayID: 37, Philips Epson S1D15G14 Code(05): OTP closed Code(08): BootKEY is unknown Code(0D): Keys are registered in BCORE Code(10): Minimal access to BFB Code(15): Complete condition Code(19): Monitoring is switched on Code(1D): Blocks 5121,5122,5123 are present Battery Voltage 3869 mV. SecurityMode: Customer

02-08-2008, 15:57	#5 (permalink)
moder10 Insane Poster Join Date: Dec 2007 Location: Italy Posts: 77 Member: 650401 Status: Offline Thanks Meter: 2	Siemens MC60.....Display blu and BZZZZ on power Hi guys, when i try to turn on the mobiles SIEMENS MC60, the display appear all blu and the mobile make BZZZZ then it turn off automatically. Please help me...let me know what do i have to do. This is the log: Start... Loading ServiceBoot... Sending ServiceBoot Ok. HWID: 132 (MC60) MC60 lg95 Sw05 17.09.03 12:23:47 IMEI: ****************** DisplayID: 0, Unknown or misses Code(05): OTP closed Code(08): BootKEY is unknown Code(0D): Keys are registered in BCORE Code(10): Minimal access to BFB Code(15): Complete condition Code(19): Monitoring is switched on Code(1D): Blocks 5121,5122,5123 are present Battery Voltage 3841 mV. SecurityMode: Customer Br, Moder

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Solutions for Siemens A60-C60-MC60	samirov-gsm	Siemens Hardware Repair Area	0	07-02-2009 08:46
Siemens A60,c60 Flashfiles Joker,sst &frea	5rrrrr	x6x and x7x Flashpatching	4	05-17-2006 20:48
Siemens a60 Power ON can't be detected!	robertogsm	E-Gold Based Phones	1	11-23-2005 20:39
Siemens A60--C60	Mihnea	Siemens Hardware Repair Area	2	06-06-2004 17:21

02-08-2008, 13:48	#3 (permalink)
ABOUSHADY No Life Poster Join Date: Nov 2005 Location: ABouSHaDy Age: 48 Posts: 1,873 Member: 200717 Status: Offline Sonork: 100.1580056 Thanks Meter: 793	Reflsh With Joker And Defrag Eepr

02-08-2008, 16:03	#6 (permalink)
valiu No Life Poster Join Date: Jul 2003 Location: Romania, Fagaras Age: 46 Posts: 960 Member: 34379 Status: Offline Thanks Meter: 101	write a full flash and after that do repair

02-08-2008, 20:16	#9 (permalink)
moder10 Insane Poster Join Date: Dec 2007 Location: Italy Posts: 77 Member: 650401 Status: Offline Thanks Meter: 2	Do i have to make a cut for FULLFLASH of MC60??? Br, Moder

02-08-2008, 20:36	#10 (permalink)
moder10 Insane Poster Join Date: Dec 2007 Location: Italy Posts: 77 Member: 650401 Status: Offline Thanks Meter: 2	Do i have to make a cut for FULLFLASH of C60??? Br, Moder

02-08-2008, 20:37	#11 (permalink)
moder10 Insane Poster Join Date: Dec 2007 Location: Italy Posts: 77 Member: 650401 Status: Offline Thanks Meter: 2	Do i have to make a cut for FULLFLASH of A60??? Br, Moder

02-08-2008, 20:46	#12 (permalink)
Crumarix1 No Life Poster Join Date: Sep 2004 Location: in AXE control room Age: 54 Posts: 954 Member: 84300 Status: Offline Thanks Meter: 74	Yes,and use freia...it's easyest du u open an oldsiemensService,or u discower a siemens factory garbage ????

02-08-2008, 20:48	#13 (permalink)
Crumarix1 No Life Poster Join Date: Sep 2004 Location: in AXE control room Age: 54 Posts: 954 Member: 84300 Status: Offline Thanks Meter: 74	did u try Contast tool for Siemens,usualy after flash u need to setup contrast level... and yes u need to do CUT... du u ewer read old post before u posting ???