siemens cf 110 - Page 2 - GSM-Forum

Chris02 · 01-04-2006, 20:58

Quote:

Originally Posted by lader

this phone is
E-Gold Based Phones
or
S-Gold Based Phones
or

E-Gold lite based

The Dog · 01-04-2006, 23:33

http://forum.gsmhosting.com/vbb/atta...9&d=1134395902

I use V033

summer_20xx · 01-08-2006, 23:33

@all
i have now one cf110 , also i did the test point , now can any one show how to unlock it with joker v0341, cause i didn't unlock any siemens with this soft.
thanks in advance.

paklink · 02-07-2006, 08:30

press joker button then post rsult

thxxxxxxxxxx

Phreackgsm · 02-07-2006, 14:01

Hi.

Quote:

Originally Posted by summer_20xx

@all
i have now one cf110 , also i did the test point , now can any one show how to unlock it with joker v0341, cause i didn't unlock any siemens with this soft.
thanks in advance.

Dowload Joker V0.3.4.3 here:
http://www.unlockeasy.com/modules.ph...=getit&lid=765

- Conect phone, C55 cable
- 9V
- Select AX72/75,C110
- Selec your Com Port

**Test connection:
Flash/BCORE/Read and power boton, ALL OK?

- SKey
- ReCalc All Keys

In.., + or -, 4 minuts unlock phone, test in CF110 V06 1000%

1º, I´m [Calc Skey], and later, I test [ReCalc All Keys]

Start...
Loading BootsModel(AX75)...
Sending StartBoot Ok.
Sending MainBoot Ok.
SIEMENS C110 lg5 Sw06
Soft FlashID: 0001/2221
FlashID: 0001/227E-2221-2201
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 128Kb
Start EEPROM segments at addres 0x7A0000
FSN: EC28C50F -> PhoneID: 0FC528EC
OTP IMEI: 3xxxxxxxxx
HASH: E29EEC3632C8FE6C1F86A6358EDD2636
Boot terminated.
Test and Calc Skey...
BOOTKEY: 69192A228485D413E4E4FA156484A700
SKEY: 4639259

*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
BCORE HASH is equivalent - not change.
Read EEPROM addr: 0x7A0000 size: 0x060000...
EEPROM backup in ".\Backup\C110lg5Sw06_EEPROM_060207113207.bin" file.
Write EEPROM addr: 0x7A0000 size: 0x060000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.

Bro.

ednacell · 02-07-2006, 15:32

Quote:

Originally Posted by The Dog

http://forum.gsmhosting.com/vbb/atta...9&d=1134395902
I use V033

The Dog, Thank you, but does anybody have a clearer picture not sure where to cut track.

BR

Phreackgsm · 02-08-2006, 08:01

Hi.

Quote:

Originally Posted by ********

anybody have a clearer picture not sure where to cut track.
BR

Picture is perfect, only need number of the track, 7ª

See my Attached

Bro.

The Dog · 02-08-2006, 17:26

I dont understand it is very clear!!

ednacell · 02-08-2006, 18:47

Sorry for being picky, but thank you both picture much clearer now. Happy unlocking.

BR

tyson0941 · 02-13-2006, 21:42

hi! i hawe a cf110 simens, end after wrong cut ,i dont hawe signal.pls any solution to repair? pls help

ispania.net · 03-01-2006, 22:39

I made testpoint from the picture above for my CF110, and now cannot switch it on WHEN cable connected. I use no original cable that works fine before testpoint. What I made wrong? Could you help me plz?

ednacell · 03-25-2006, 18:21

With the picture provided how to cut track, which one to do? either blue or yellow.

Denva · 09-27-2011, 15:33

Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
MobileMode: Service
HWID: 239 (C110)
C110 lg98 Sw07 14.10.05 14:56:56
IMEI: 357547002XXXXXX
DisplayID: 62, Sharp Nec PD161700
FSN: C17AF7E0
SW FlashID: 0001/2221
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage very low! 3643 mV!
SecurityMode: Factory
Phone off...

01-04-2006, 23:33	#17 (permalink)
The Dog No Life Poster Join Date: Nov 2002 Location: Canary Islands Age: 53 Posts: 1,432 Member: 17351 Status: Offline Thanks Meter: 41	Testpoint here most versions http://forum.gsmhosting.com/vbb/atta...9&d=1134395902 I use V033

02-08-2006, 17:26	#23 (permalink)
The Dog No Life Poster Join Date: Nov 2002 Location: Canary Islands Age: 53 Posts: 1,432 Member: 17351 Status: Offline Thanks Meter: 41	@******** I dont understand it is very clear!!

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Siemens Cf 110 No Power Help!	mdoscorpio	DreamBox	1	08-17-2008 14:33
CF 110 - White Screen	Ferchi	E-Gold Based Phones	6	07-09-2007 05:00
CF 110 unlock !!!ok	alunecosu_hd	SST-Dongle	26	11-04-2006 14:12
cf 110	benarmand	E-Gold Based Phones	4	09-19-2006 22:28
CF 110 bad cut repair...	Alinush75	E-Gold Based Phones	1	03-11-2006 07:38

01-08-2006, 23:33	#18 (permalink)
summer_20xx No Life Poster Join Date: Aug 2005 Age: 39 Posts: 818 Member: 167622 Status: Offline Sonork: 100.1608761 Thanks Meter: 40	@all i have now one cf110 , also i did the test point , now can any one show how to unlock it with joker v0341, cause i didn't unlock any siemens with this soft. thanks in advance.

02-07-2006, 08:30	#19 (permalink)
paklink No Life Poster Join Date: Jul 2004 Location: PakLink.org Posts: 1,548 Member: 71321 Status: Offline Sonork: 100.1576579 Thanks Meter: 428	press joker button then post rsult thxxxxxxxxxx

02-08-2006, 18:47	#24 (permalink)
ednacell Banned Join Date: Aug 2004 Location: Gsm Unlockers Awareness Report Posts: 1,366 Member: 76978 Status: Offline Thanks Meter: 15	Sorry for being picky, but thank you both picture much clearer now. Happy unlocking. BR

02-13-2006, 21:42	#25 (permalink)
tyson0941 Insane Poster Join Date: Aug 2005 Location: Romania, Jimbolia Age: 41 Posts: 92 Member: 175296 Status: Offline Thanks Meter: 4	hi! i hawe a cf110 simens, end after wrong cut ,i dont hawe signal.pls any solution to repair? pls help

03-01-2006, 22:39	#26 (permalink)
ispania.net Junior Member Join Date: Mar 2006 Posts: 1 Member: 238540 Status: Offline Thanks Meter: 0	I made testpoint from the picture above for my CF110, and now cannot switch it on WHEN cable connected. I use no original cable that works fine before testpoint. What I made wrong? Could you help me plz?

09-27-2011, 15:33	#28 (permalink)
Denva No Life Poster Join Date: Mar 2010 Location: Unknown Posts: 882 Member: 1274304 Status: Offline Sonork: 100.1617965 Thanks Meter: 195	Sending ServiceBoot Ok. BFB Speed 115200 Baud - Ok. MobileMode: Service HWID: 239 (C110) C110 lg98 Sw07 14.10.05 14:56:56 IMEI: 357547002XXXXXX DisplayID: 62, Sharp Nec PD161700 FSN: C17AF7E0 SW FlashID: 0001/2221 Code(05): OTP closed Code(09): BootKEY is written in EEPROM Code(0D): Keys are registered in BCORE Code(13): Complete access to BFB Code(15): Complete condition Code(19): Monitoring is switched on Code(1D): Blocks 5121,5122,5123 are present Battery Voltage very low! 3643 mV! SecurityMode: Factory Phone off...