3650 dead - GSM-Forum

gsm2repair · 07-02-2004, 13:13

i've a 3650 dont charge dont power on and no connection with griffin
dont go in test mode..any idea about ?
b.r.
Andy

DeltaGSM · 07-02-2004, 15:14

flash with griffin with autopower, no need detect phones.

BR

gsm2repair · 07-02-2004, 16:03

I've tried now but griffin after initializing phone and autopower says :
error 44449000
griffin is original and verion is 2.85
maybe a hardware prob ? how can i solve this ?
b.r.
Andy

DeltaGSM · 07-02-2004, 16:15

1 first clean board with alcohol ( maybe water damage )
2. try flashing again
3. if still thats hw problem, check UEM & flash IC.

BR

Rajgreat · 07-12-2004, 09:54

hello all,
I've 3650 when we on it NOKIA BLINKS three times and then off.
not detect by griffin.i clean board but same problem.
what may be problem?

thanks

eko · 07-12-2004, 10:43

@Rajgreat,

Search the forum for old posts concerning 4Blinks , as that is the name of the problem on your phone.

Flash and format user area .

marko1972 · 07-12-2004, 10:53

these problems are prevelant on 3650, 7650,6600..hansets of this type with lots of user functions.User memory starts to corrupt /crossover into operational mem..Yes Format user data is req'..if handset is not powering, then this will have to be done while attempting to flash...get into test mode..

Imran_Khatri · 07-12-2004, 11:57

@4 Blinks....First Flash with this file select in ppm and,then full flash the phone and format User Area.....here....

4 Blinks Solution...

WBR
Imran Khatri

Rajgreat · 07-15-2004, 19:23

Thanks eko & allof you,
I clean board twice and dry it with hot air very well,
then flash it,it get conected.now its working 100% OK.

thanks all of you again.

Rajgreat.

07-02-2004, 13:13	#1 (permalink)
gsm2repair Junior Member Join Date: May 2002 Posts: 26 Member: 12091 Status: Offline Thanks Meter: 0	3650 dead i've a 3650 dont charge dont power on and no connection with griffin dont go in test mode..any idea about ? b.r. Andy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 3650 dead and not dead	tsarkh	Nokia Hardware & Hardware Repair	4	03-17-2006 03:49
My 3650 Dead No display	hamidtele	WD2 & APE (Symbian Phones)	3	12-04-2004 16:23
3650 dead	apadana	Nokia Hardware & Hardware Repair	0	11-13-2003 07:26
3650 dead - almost	DamTin	WD2 & APE (Symbian Phones)	0	10-24-2003 17:27
NOKIA 3650 DEAD error FFFF9000	mobilemafia	WD2 & APE (Symbian Phones)	3	10-04-2003 07:22

07-02-2004, 15:14	#2 (permalink)
DeltaGSM No Life Poster Join Date: May 2004 Location: Bandung-Flasher.com Posts: 1,118 Member: 65947 Status: Offline Thanks Meter: 135	flash with griffin with autopower, no need detect phones. BR

07-02-2004, 16:03	#3 (permalink)
gsm2repair Junior Member Join Date: May 2002 Posts: 26 Member: 12091 Status: Offline Thanks Meter: 0	I've tried now but griffin after initializing phone and autopower says : error 44449000 griffin is original and verion is 2.85 maybe a hardware prob ? how can i solve this ? b.r. Andy

07-02-2004, 16:15	#4 (permalink)
DeltaGSM No Life Poster Join Date: May 2004 Location: Bandung-Flasher.com Posts: 1,118 Member: 65947 Status: Offline Thanks Meter: 135	1 first clean board with alcohol ( maybe water damage ) 2. try flashing again 3. if still thats hw problem, check UEM & flash IC. BR

07-12-2004, 09:54	#5 (permalink)
Rajgreat Freak Poster Join Date: Jun 2004 Age: 54 Posts: 128 Member: 68959 Status: Offline Thanks Meter: 16	hello all, I've 3650 when we on it NOKIA BLINKS three times and then off. not detect by griffin.i clean board but same problem. what may be problem? thanks

07-12-2004, 10:43	#6 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	@Rajgreat, Search the forum for old posts concerning 4Blinks , as that is the name of the problem on your phone. Flash and format user area .

07-12-2004, 10:53	#7 (permalink)
marko1972 Junior Member Join Date: Jul 2004 Posts: 4 Member: 72794 Status: Offline Thanks Meter: 0	these problems are prevelant on 3650, 7650,6600..hansets of this type with lots of user functions.User memory starts to corrupt /crossover into operational mem..Yes Format user data is req'..if handset is not powering, then this will have to be done while attempting to flash...get into test mode..

07-12-2004, 11:57	#8 (permalink)
Imran_Khatri No Life Poster Join Date: Mar 2004 Location: Pakistan Age: 42 Posts: 1,416 Member: 56561 Status: Offline Sonork: 100.114006 Thanks Meter: 41	@4 Blinks....First Flash with this file select in ppm and,then full flash the phone and format User Area.....here.... 4 Blinks Solution... WBR Imran Khatri

07-15-2004, 19:23	#9 (permalink)
Rajgreat Freak Poster Join Date: Jun 2004 Age: 54 Posts: 128 Member: 68959 Status: Offline Thanks Meter: 16	Thanks eko & allof you, I clean board twice and dry it with hot air very well, then flash it,it get conected.now its working 100% OK. thanks all of you again. Rajgreat.