7650 Won't Finish Flashing,urgent help please - GSM-Forum

ViperGSM · 07-08-2004, 09:09

Hi guys i need some help here
I received 7650 who won't power on,almost new phone,no hardware damage
I tryed to flash with griffin first,it won't even start reports me error Error[12211221]
Then i tryed with Tornado 1.3a,and at some point it stops:
Cannot Detect Mobile Brand
1st Boot Ok, WD2, UPP: 0082
2nd Boot Ok, FLID: 00898876, Intel 28F128W18-T
Algorithm: w2_int_b.fia
Algorithm Ok, MSID: 844BF75B5559FBD623CF527203
Decoded MSID: 3E4EBAF7-00DD10A5-A8000000
Encoded FAID: 7C929363-18478161-C75110CE
Area: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area: 0x00010000-0x00EF9FFF Erased, Time: 02:24
Area: 0x00FF0000-0x00FFC000 Erased, Time: 00:01
BT MCM (26) Image Found & Skipped: 1211
BT MCM (26) Image Found: 22, 0x0002BAC0
BT MCM Flashing Done, Time: 00:12
BT MCM Registering Done
MCU Flashing Completed, Time: 06:45
Erasing: 0x00000000-0x0000FFFF ...
Erasing Error: 10, at: 0x00000000-0x0000FFFF, 9407AA
Process Failed, Repowering Mobile
Is this hardware problem,should i change flash?
i used Nhl23250.6c1 and Nhl23250.628

pupy_jai · 07-08-2004, 13:48

Quote:

Originally Posted by SmileGSM:)

Hi guys i need some help here
I received 7650 who won't power on,almost new phone,no hardware damage
I tryed to flash with griffin first,it won't even start reports me error Error[12211221]
Then i tryed with Tornado 1.3a,and at some point it stops:
Cannot Detect Mobile Brand
1st Boot Ok, WD2, UPP: 0082
2nd Boot Ok, FLID: 00898876, Intel 28F128W18-T
Algorithm: w2_int_b.fia
Algorithm Ok, MSID: 844BF75B5559FBD623CF527203
Decoded MSID: 3E4EBAF7-00DD10A5-A8000000
Encoded FAID: 7C929363-18478161-C75110CE
Area: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area: 0x00010000-0x00EF9FFF Erased, Time: 02:24
Area: 0x00FF0000-0x00FFC000 Erased, Time: 00:01
BT MCM (26) Image Found & Skipped: 1211
BT MCM (26) Image Found: 22, 0x0002BAC0
BT MCM Flashing Done, Time: 00:12
BT MCM Registering Done
MCU Flashing Completed, Time: 06:45
Erasing: 0x00000000-0x0000FFFF ...
Erasing Error: 10, at: 0x00000000-0x0000FFFF, 9407AA
Process Failed, Repowering Mobile
Is this hardware problem,should i change flash?
i used Nhl23250.6c1 and Nhl23250.628

try skip bt flash
maby can help you

JohnyBoyGSM · 07-12-2004, 21:55

flesuj samo ppm, znaci iskljuci mcu i selektuj ppm istu verziju i mora da ide brate.
pozdrav

ViperGSM · 07-13-2004, 08:08

I already tryed all of that but still no succes...I'll try to find flash chip today

keany · 07-13-2004, 08:35

are you sure that all that you say is english becouse i dont understand what kind of language it is?

ViperGSM · 07-14-2004, 08:32

It's a SERBIAN language,If You have a problem with that read some other topic

07-08-2004, 09:09	#1 (permalink)
ViperGSM No Life Poster Join Date: Jan 2004 Location: Serbia Age: 40 Posts: 871 Member: 49634 Status: Offline Sonork: 100.1671023 Thanks Meter: 71	7650 Won't Finish Flashing,urgent help please Hi guys i need some help here I received 7650 who won't power on,almost new phone,no hardware damage I tryed to flash with griffin first,it won't even start reports me error Error[12211221] Then i tryed with Tornado 1.3a,and at some point it stops: Cannot Detect Mobile Brand 1st Boot Ok, WD2, UPP: 0082 2nd Boot Ok, FLID: 00898876, Intel 28F128W18-T Algorithm: w2_int_b.fia Algorithm Ok, MSID: 844BF75B5559FBD623CF527203 Decoded MSID: 3E4EBAF7-00DD10A5-A8000000 Encoded FAID: 7C929363-18478161-C75110CE Area: 0x00000000-0x0000FFFF Erased, Time: 00:00 Area: 0x00010000-0x00EF9FFF Erased, Time: 02:24 Area: 0x00FF0000-0x00FFC000 Erased, Time: 00:01 BT MCM (26) Image Found & Skipped: 1211 BT MCM (26) Image Found: 22, 0x0002BAC0 BT MCM Flashing Done, Time: 00:12 BT MCM Registering Done MCU Flashing Completed, Time: 06:45 Erasing: 0x00000000-0x0000FFFF ... Erasing Error: 10, at: 0x00000000-0x0000FFFF, 9407AA Process Failed, Repowering Mobile Is this hardware problem,should i change flash? i used Nhl23250.6c1 and Nhl23250.628

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Urgent Help Please Nokia 3310 Flash	without_soul666	HWK	2	07-01-2007 13:08
Urgently Help Please : Flashing S E p910i	Bob_Rules	Sony Ericsson Hardware Repair	1	07-24-2006 15:08
Nokia 7650 dead after flash pls help???	proxy_gsm	WD2 & APE (Symbian Phones)	7	11-10-2004 10:11
A300 working but after flash Dead. i need urgent help please.	DrMobile	VLSI, Conexant, Skyworks and Old Models	6	06-23-2004 11:09
Urgent help please!!!	manijak	Nokia Hardware & Hardware Repair	2	06-05-2003 19:56

07-12-2004, 21:55	#3 (permalink)
JohnyBoyGSM Freak Poster Join Date: Feb 2004 Location: Bosnian Kingdom Age: 46 Posts: 199 Member: 52096 Status: Offline Thanks Meter: 8	flesuj samo ppm, znaci iskljuci mcu i selektuj ppm istu verziju i mora da ide brate. pozdrav

07-13-2004, 08:08	#4 (permalink)
ViperGSM No Life Poster Join Date: Jan 2004 Location: Serbia Age: 40 Posts: 871 Member: 49634 Status: Offline Sonork: 100.1671023 Thanks Meter: 71	I already tryed all of that but still no succes...I'll try to find flash chip today

07-13-2004, 08:35	#5 (permalink)
keany No Life Poster Join Date: May 2004 Location: gsm-land Age: 45 Posts: 755 Member: 67419 Status: Offline Thanks Meter: 237	are you sure that all that you say is english becouse i dont understand what kind of language it is?

07-14-2004, 08:32	#6 (permalink)
ViperGSM No Life Poster Join Date: Jan 2004 Location: Serbia Age: 40 Posts: 871 Member: 49634 Status: Offline Sonork: 100.1671023 Thanks Meter: 71	It's a SERBIAN language,If You have a problem with that read some other topic