post me your problem (NOKIA) - Page 54 - GSM-Forum

_iskor_ · 03-21-2006, 17:00

Quote:

Originally Posted by benchout

my 6600 keypad (menu and OK button doesnt work) please help

check the crystal on the ryt side of the board to board connector. replace if needed.

_iskor_ · 03-21-2006, 17:05

Quote:

Originally Posted by ticoichip

I have 6610.When i charge battery about 6hours-->phone die.
Now i try to flash.It's okie.But cant info.
I also do : relfow.UEM,Ram,Harga.---> flash okie .Check okie ,Cant info
Pls help me

are using jaf? try to power on phone. jaf does not display local mode if UEM is damage. if u cant power on phone mannually then replace UEM.

_iskor_ · 03-21-2006, 17:08

Quote:

Originally Posted by BoomBoy

Then i install the following software and have installed the Dongle, and open the program (software prog....) it's comes up with a box that tells the program had vault, and then close..

just let the installer finished installing , then try to search and pair a device.

_iskor_ · 03-21-2006, 17:19

Quote:

Originally Posted by bboyredcel

I have a 6230b and a 6230i... I was wondering if i can somehow mess with the RF or something to allow the 6230i to accept 850/1800/1900 so that it will work better in the US? Is there anyway to reflash the 6230i to accept 850? or change some hardware? I'll do any steps necessary cuz i am interested in learning how to do this and getting my 6230i up and running full steam here in the US...

I have the 6230i that does not get very good reception around my area, the towers local to me are 850 for the most part... I also have a 6230b which gets rediculously good reception around me, how do i go about converting the 6230i to support the 850 frequency?

any and all help is much appreciated!

6230i is primarily made to work with asian region which uses gsm 1800 and 1900, while us uses 850 2000 mghz. when a phone from US came here in the PH we usually replace filters to work with gsm 1800 n 1900. why not try to replace 6230i filters with the one that comes from a phone that uses 850 n gsm2000.
hope i got it ryt.

_iskor_ · 03-21-2006, 17:21

Quote:

Originally Posted by fanbang

thanks for replying. received a w800 with same problem today.
have you got a picture of where is LCD driver is?
thanks again

searching the thread will help u a lot?
good luck!

_iskor_ · 03-21-2006, 17:23

Quote:

Originally Posted by Moldovanus

I have a SX1. I have done a phone format using the *#7370# code and now the phone won't start with my memory card inside:it says "Aplication closed:Phone" and "contact retailler". if i remove the memory card, the phone starts normally. but when i insert my memory card it says "App.closed AppArcServerThread". this error appears over and over again, blocking my phone. please help

formating ur memory card wilh solve the problem and it should.

_iskor_ · 03-21-2006, 17:34

Quote:

Originally Posted by Barbaros

When i download *RAR. files i cant install them onto my phone, so i changed it to 'Open with nokia app installer' didnt work. i tried copy pasting them and then installing with a file manager but it just gave an error. I tried to 'Open with word' This did get on my phone but now it says ''No Default viewer for *.RAR''

what is ur phone model and what are u trying to install.maybe u are trying to install a jad or a jar file with ur wd2 phone. it will not work.
wd2 phones need a sis file.

_iskor_ · 03-21-2006, 17:41

Quote:

Originally Posted by saanus

what is the use of "auto CNT" option in UFS?

ur reseller will help u a lot.

lamnguyenmobile · 03-21-2006, 17:48

Originally Posted by ticoichip
I have 6610.When i charge battery about 6hours-->phone die.
Now i try to flash.It's okie.But cant info.
I also do : relfow.UEM,Ram,Harga.---> flash okie .Check okie ,Cant info
Pls help me

UEM is damage, replace UEM.

brikyo · 03-21-2006, 22:26

Quote:
Originally Posted by brikyo
i have a problem... i have N70. I have a problem reading sms when i change my themes into a dark coloured or a colourful themes. the colour of the sms fonts is black..and i cant seem to change it... is there any solution to this? i want to be able to enjoy beautiful themes without having to worry about not being able to read sms.

any help/reply would be greatly appreciated.

thanks

Quote:

Originally Posted by bingo_888

hi,
go to settings, display, then adjust light...

Its a litle bit better now thanks~! but is there any other way perhaps to change the colour of the sms font? or is there a program to read sms? i am still having problem reading it if the background is totally black like a Nike theme.

Thanks a lot for the reply though, appreciated it.

^__^

thanks heaps

damore · 03-21-2006, 22:44

hi,

can anyone give me the master code for a hash code.
I need to access bios .

ta

pradeep agrawal · 03-22-2006, 02:57

dear nolyboy please send me nokia2600 new version file on my mail thank you my mail id is [email protected]

nolyboy · 03-22-2006, 05:40

Quote:

Originally Posted by pradeep agrawal

dear nolyboy please send me nokia2600 new version file on my mail thank you my mail id is [email protected]

already there pls check ur mail

nolyboy · 03-22-2006, 05:50

[quote=saanus]what is the use of "auto CNT" option in UFS?[/quote

one thread is enough pls dont spam this thread]

nolyboy · 03-22-2006, 05:52

Quote:

Originally Posted by _iskor_

bossing matumal ngayon no.
im from Q.C

yes tama ka napakatumal

you have ym??

03-21-2006, 22:44	#806 (permalink)
damore Junior Member Join Date: Mar 2006 Posts: 9 Member: 245217 Status: Offline Thanks Meter: 0	master code for hash code hi, can anyone give me the master code for a hash code. I need to access bios . ta

03-22-2006, 02:57	#807 (permalink)
pradeep agrawal Freak Poster Join Date: Jan 2006 Posts: 128 Member: 218345 Status: Offline Thanks Meter: 37	nokia2600 file dear nolyboy please send me nokia2600 new version file on my mail thank you my mail id is [email protected]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
post me your problem in motorola and let me give you the rite solution	greeni222000	Motorola Hardware Repair	2161	12-25-2023 05:54
Post me your BB5 problem here.. Ill try to help with Pict	Rizal Arsyad Dini	Nokia Hardware & Hardware Repair	13	10-05-2014 09:23
!!!!post Me Your Hardware Problem!!!!	Ustad rajab.Com	Nokia Hardware & Hardware Repair	32	01-18-2013 08:37
post me your all 6600 problem	tommobil2005	Nokia Repair Guide and FAQ	459	01-17-2011 12:23

03-21-2006, 17:48	#804 (permalink)
lamnguyenmobile Junior Member Join Date: Jan 2006 Posts: 29 Member: 217367 Status: Offline Thanks Meter: 0	Originally Posted by ticoichip I have 6610.When i charge battery about 6hours-->phone die. Now i try to flash.It's okie.But cant info. I also do : relfow.UEM,Ram,Harga.---> flash okie .Check okie ,Cant info Pls help me UEM is damage, replace UEM.

03-22-2006, 05:50	#809 (permalink)
nolyboy No Life Poster Join Date: Nov 2005 Location: PHIL Posts: 981 Member: 197247 Status: Offline Thanks Meter: 296	[quote=saanus]what is the use of "auto CNT" option in UFS?[/quote one thread is enough pls dont spam this thread]