Sagem myc4-2 dead while unlocking - GSM-Forum

toptech · 01-21-2010, 07:53

i have a sagem myc4-2 that just wene dead dead while i was trying to unlock it.however when i assembled it and put back the battery it shows the little blue light on the flip top.what could be the problem?

Netbazaar · 01-27-2010, 16:50

Hiya, unlocking with which tool?
Have you tried flashing with a full flash (generic or otherwise)?

toptech · 02-12-2010, 14:30

Quote:

Originally Posted by Netbazaar

Hiya, unlocking with which tool?
Have you tried flashing with a full flash (generic or otherwise)?

i was tryng to unlock with sagdd.however iam not quite sure what to use to flash.please help if you can.

Netbazaar · 02-16-2010, 20:42

Quote:

Originally Posted by toptech

i was tryng to unlock with sagdd.however iam not quite sure what to use to flash.please help if you can.

Well, first of all, access the support area of sagdd, and pick the flash file for your phone.
I DON'T use sagdd, so I can´t tell you exactly how to get there.
For my phones I always pick the Sagem (unbranded) flash file with the latest version.
Good thing about Sagem phones, it's very difficult to get the wrong version, as long as it is the right model.
Then you can flash the file to the phone, identify in sagdd, and initiate flash procedure.
Bad news is that you need credits for that, unless you have/had so far, 25 credits (regardless of used or available) that's the plus of sagdd over SMTi

It should really solve your problem.
Fully charge your battery before doing anything, or you may kill the phone!!!!
Hope you get it going again

latigido · 02-16-2010, 23:08

@toptech
Flashing the phone can`t help you!
Just clean pcb and TP`s.
Reasemble carefully the phone.
No way to kill phone with unlocker which you have used.
Next time post your problem in right section.
So you will get faster answer and proper help.

01-21-2010, 07:53	#1 (permalink)
toptech No Life Poster Join Date: Apr 2005 Location: mars Posts: 1,096 Member: 132881 Status: Offline Thanks Meter: 105	Sagem myc4-2 dead while unlocking i have a sagem myc4-2 that just wene dead dead while i was trying to unlock it.however when i assembled it and put back the battery it shows the little blue light on the flip top.what could be the problem?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Myc4-2 dead while unlocking	toptech	SAGEM JTAG UNLOCKER	1	01-21-2010 08:24
Problem Unlocking Sagem Myc4-2	msajum	SMTi	1	06-16-2008 17:39
How to unlock sagem myc4-2????	nouvelle	ARM9 BASED M62 / M62+	1	06-25-2007 12:29
unlock sagem myC4-2	dan85mat	ARM9 BASED M62 / M62+	2	12-09-2006 21:17
Sagem Myc4-2 How To Unlock	john_john	ARM9 BASED M62 / M62+	0	11-30-2006 04:53

01-27-2010, 16:50	#2 (permalink)
Netbazaar Freak Poster Join Date: Feb 2004 Location: Brazil Posts: 195 Member: 52490 Status: Offline Thanks Meter: 8	Hiya, unlocking with which tool? Have you tried flashing with a full flash (generic or otherwise)?

02-16-2010, 23:08	#5 (permalink)
latigido No Life Poster Join Date: Feb 2002 Location: Europe Posts: 6,102 Member: 9544 Status: Offline Thanks Meter: 5,533	@toptech Flashing the phone can`t help you! Just clean pcb and TP`s. Reasemble carefully the phone. No way to kill phone with unlocker which you have used. Next time post your problem in right section. So you will get faster answer and proper help.