SPEED UP your DIAL-UP connection! - GSM-Forum

Alim Hape · 04-08-2005, 21:58

If u use a 56Kbit Modem & Dialup connection

1. Goto CONTROL-PANEL
2. System- In Device Manager, DblClick Modem..
3. In Modem Properties, Select Advanced..
4. Type 'AT&FX' at 'Extra Initialization Commands'...
5. Click OK.. Then Re-connect your Dial-Up..

Ta..da... Watch Your Connection Speed up to 115 Kbit..

abbeydguru · 04-08-2005, 22:49

how efficient is this solution?

Phase · 04-10-2005, 17:29

AT&Fx = restore factory defaults. x= number from 1 to n , depends on modem, with predefined factory values.
After AT&Fx (x = 0 ussually) many modems , most modems do not do thatl, will report connection speed equeal to terminal connection speed. Terminal speed is the speed between pc and modem.
So do not expect much from 56k modem. If you see message "Connect 115200" then check modem settings.

04-08-2005, 21:58	#1 (permalink)
Alim Hape No Life Poster Join Date: Nov 2003 Location: 00000000h Age: 42 Posts: 590 Member: 43548 Status: Offline Thanks Meter: 2,192	SPEED UP your DIAL-UP connection! If u use a 56Kbit Modem & Dialup connection 1. Goto CONTROL-PANEL 2. System- In Device Manager, DblClick Modem.. 3. In Modem Properties, Select Advanced.. 4. Type 'AT&FX' at 'Extra Initialization Commands'... 5. Click OK.. Then Re-connect your Dial-Up.. Ta..da... Watch Your Connection Speed up to 115 Kbit..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Speed Up Your S60 by very simple steps	khem	Nokia Hardware & Hardware Repair	1	10-16-2006 11:52
Dial up software for Ericsson T28s	h2dude	Old Ericsson Phones & Sony Phones	0	09-27-2001 14:33

04-08-2005, 22:49	#2 (permalink)
abbeydguru Cheater -Don't Deal with him- Join Date: Mar 2003 Location: ITALY Posts: 1,124 Member: 23994 Status: Offline Thanks Meter: 43	how efficient is this solution?

04-10-2005, 17:29	#3 (permalink)
Phase Junior Member Join Date: Apr 2003 Location: C-Block Age: 44 Posts: 23 Member: 26278 Status: Offline Thanks Meter: 0	AT&Fx = restore factory defaults. x= number from 1 to n , depends on modem, with predefined factory values. After AT&Fx (x = 0 ussually) many modems , most modems do not do thatl, will report connection speed equeal to terminal connection speed. Terminal speed is the speed between pc and modem. So do not expect much from 56k modem. If you see message "Connect 115200" then check modem settings.