Can`t unlock by tespoint...

[Best_Gsm]

I can`t unlock by tespoint siemens model like: a51 a52 c60, I must cut.
All new models like ax72 cx65 c65 c75 goes exelent whats wrong?

Happy Dreambox User

[DreamSupporter]

Hi, Best_Gsm. Please check your testpoint cable. There must be a capacitor. The information about modification of S-Gold TP cable to S-Gold/E-Gold TP cable you can find here - http://dreambox.hk/support.html.

[sirlai]

hi
same problem here
i cannot use tp method, because it does not connect
always tp picture, but no reesult
i measured tp cable, it's all good, i tried with and without capacitor, and many models, but no luck
any ideas ?
br,

[GSM Dream]

Testpoint cable EGold modification

[lhl]

HeHe,The Testpoint cable EGold modification not work for some S68 S75 or CX75,I don't know why,But New hardware BOX is working.

[sirlai]

Originally Posted by GSM Dream

Testpoint cable EGold modification

is this ur answer to anything?
as i said, allready did that, no luck
any OTHER solutin, please ???

[sirlai]

@ gsm dream
thanks for answering
very nice support
i'll recomand everyone to buy martech
best regards

[DreamSupporter]

Originally Posted by sirlai

hi
same problem here
i cannot use tp method, because it does not connect
always tp picture, but no reesult
i measured tp cable, it's all good, i tried with and without capacitor, and many models, but no luck
any ideas ?
br,

Hello, sirlai!
Please, post here an information from log window of DBSS, which is in the moment, when you are trying to connect TP. We need to know full information about your problem, because we can not help you if you just say that TP doesn't work.

[sirlai]

Originally Posted by DreamSupporter

Hello, sirlai!
Please, post here an information from log window of DBSS, which is in the moment, when you are trying to connect TP. We need to know full information about your problem, because we can not help you if you just say that TP doesn't work.

hi
here is the log, as requested
thank you

[DreamSupporter]

Originally Posted by sirlai

hi
here is the log, as requested
thank you

As I see from your logs, your cable is good (Test Point works on A70).
Explain me, what do you do step by step. And why do you run "Abort"?

[wgmmmx]

I tested on few C60 and I fond that TP metod wort with AMD flash IC but not work with INTEL IC pleasse try yourself and you will be know what I tell. bye

[dragosgsm]

Originally Posted by sirlai

hi
same problem here
i cannot use tp method, because it does not connect
always tp picture, but no reesult
i measured tp cable, it's all good, i tried with and without capacitor, and many models, but no luck
any ideas ?
br,

Same problem here!!!!!!!!!!!!!!!!!!!!!!!
I had checked the tp cable,all ok but I have this problem when trying to unlock some phones.Must be a bug or something,with some phones it's working other times I'm losing my time,I have to cut

[sirlai]

Originally Posted by DreamSupporter

As I see from your logs, your cable is good (Test Point works on A70).
Explain me, what do you do step by step. And why do you run "Abort"?

on that particular phone (a70) i've selected by mistake tespoint mode, after i cut it ....so ...i dont think this is relevant..
anyway
this is how is happening
all is ok till i get the message connect tp, the tp picture pops up, and in the background, is saying 'working'.but, nohing else happens.if i hit abort, i get 'u may now disconnect testpoint', but not before, so anyway, after that it imediatelly says aborted by user(or something similar).the point is that the program acts as if i dont connect the tp at all
i tryed to work a phone, using cuttrack mode and tp cable for power, and i got a mesage saying that is recommended to use battery this way, so i figured that the service cable(the one with the tp) is propery connected(or part of it).then, i measured each wire of the tp cable, and seems all good, but i dont have the schematics so i really dont know if the pinouts are correct.ok. today i tried a different thing: i flashed a s65 using tp mode, but instead of usingh the tp adaptor, when the picture appeared, i connected the tp to gnd.this way all worked well....so my guess is : the tp adaptes has wrong pinout, or the rj 45 service connector is faulty (in this cases, wont be a problem fixing it, if u can send me correct pinout), but if this 2 are ok, that leaves me with a faulty box and that is not quite good, considering the fact that my reseller does not stryke me as a very serious person(i could tell u the reasons too,if u really want but over pm )
so...pls send me pinout for the tp cable if possible, and ill let u know if i can make it work
thank you for your time
br

[Best_Gsm]

heloo this is very old post:

[DreamSupporter]

Originally Posted by sirlai

...today i tried a different thing: i flashed a s65 using tp mode, but instead of usingh the tp adaptor, when the picture appeared, i connected the tp to gnd.this way all worked well....

It could not work, if you had connected TP cable to gnd. It is impossible.

Originally Posted by sirlai

so...pls send me pinout for the tp cable if possible, and ill let u know if i can make it work
thank you for your time
br

Problem is in the TP cable or in the box. Check the cable. You can find a documents with pinouts in our support section at http://www.boot-loader.com in DreamBox -> Docs -> DreamBox Cables.