Getting Crazy with my SE K600i cid 49 - GSM-Forum

DarkCityMan · 06-05-2006, 19:23

Hi, I m going crazy with my SE K600i cid 49 (R2T002 prgCXC 1250014_EU_1_MI R2T002).
I try almost everything, and I only spend money with it.

I start with DaVinci remote unlock… and nothing, just spend a few logs, and then I buy the Clip from JIC solutions… and nothing again, just money!!! Now I have a new USB-Smart dongle and still nothing too.
I am using a T28 serial cable (I tray already a serial USB T28 cable too) and I get some errors.

Trying to Read all codes, Read phone info and clear SP locks I get:

Switch phone ON
Get phone info
Flash CID: 49
Phone KEY: A1_DB2000_49_RED
ERROR: 305010

Can you give me please some help?

Thank You!

DCM

fingusio · 06-05-2006, 21:35

Try on interface UFSx/Twister, must work!!!

br,
fingusio

agent003 · 06-05-2006, 22:00

m8....if you take some time off for some literature there is no need to spend silly money... do your home work!!

If you where serious about what you do you would also have ufs amongst your tools and that would be half work done

BR

zulea · 06-05-2006, 22:42

Quote:

Originally Posted by DarkCityMan

Hi, I m going crazy with my SE K600i cid 49 (R2T002 prgCXC 1250014_EU_1_MI R2T002).
I try almost everything, and I only spend money with it.

I start with DaVinci remote unlock… and nothing, just spend a few logs, and then I buy the Clip from JIC solutions… and nothing again, just money!!! Now I have a new USB-Smart dongle and still nothing too.
I am using a T28 serial cable (I tray already a serial USB T28 cable too) and I get some errors.

Trying to Read all codes, Read phone info and clear SP locks I get:

Switch phone ON
Get phone info
Flash CID: 49
Phone KEY: A1_DB2000_49_RED
ERROR: 305010

Can you give me please some help?

Thank You!

DCM

Will not work with T28 serial cable because of high baudraete needed on this phone. Get an 4in1 SonyEricsson Cruiser cable if you cannot afford an UFS/Twister!

DarkCityMan · 06-06-2006, 11:28

Thank You Dr. Zulea.
I will buy the 4in1 SonyEricsson Cruiser cable as you recommendation.
I expect to have same news during next week.

“Obrigado”

DCM

DarkCityMan · 06-12-2006, 11:27

Hi Dr Zulea, You are Right!! Thank You!! It’s Done!!

I buy a 4in1 Cable as your recommendation.
Same difficulty at the beginning because the dongle don’t recognise the phone.

So… First, I have to find a universal “USB Serial Drive”. I find it in “simsim” web page, then I have to define the correct serial port to this drive (Port 10 in my case), and then:

Switch phone ON
Get phone info
Flash CID: 49
Phone KEY: A1_DB2000_49_RED
OTP CID: 49
Phone IMEI: 356xxxxxxxxxxx
Flash ID: 200D
Switch phone ON
Write Flashloader CID49
Waiting to finish
Switch phone ON
Start Flashloader CID49
Reading flash CXC version
Version: R2T002_CXC1250014_EU_1_MI
Send FLASH application
Write GDFS Flashloader
Switch phone ON
Start GDFS Flashloader
Setup GDFS Loader
Read all codes
IMEI: 35657200613510
Unlock NCK: 26205141
Unlock NSCK: 87339735
Unlock SPCK: 32239941
Unlock CCK: 98201250
Unlock PCK: 43806624
Unlock ECK: 62094421
Relock NCK: 27598868
Relock NSCK: 62337091
Relock SPCK: 74273331
Relock CCK: 77791162
Relock PCK: 71760589
Relock ECK: 30244266
User code: 0000
Switch phone ON
Write Flashloader CID49
Waiting to finish
Switch phone ON
Start Flashloader CID49
Send FLASH application
Recover first flash part
Operation succesfull

“Obrigado”

Regards

DCM

kragel · 06-12-2006, 21:07

please help with dead k608i:

Read phone info (SEMC 8.6 with 4 in 1):

Switch phone ON
ERROR: Certificate not find. Please use Recovery!

Recover certificate:

Recover certificate
Switch phone ON
Switch phone ON
ERROR: Phone already have certificate!

agent003 · 06-13-2006, 02:41

This has to be something to do with checking the tespoint box i believe......give us a screen shot of the software from when you get these messages.

BR

kragel · 06-13-2006, 12:53

Quote:

Originally Posted by agent003

This has to be something to do with checking the tespoint box i believe......

no. TP is not checked.
I only select model and Read phone info or Recover certificate functions.

06-05-2006, 19:23	#1 (permalink)
DarkCityMan Junior Member Join Date: Jun 2006 Location: Portugal Posts: 6 Member: 286638 Status: Offline Thanks Meter: 0	Getting Crazy with my SE K600i cid 49 Hi, I m going crazy with my SE K600i cid 49 (R2T002 prgCXC 1250014_EU_1_MI R2T002). I try almost everything, and I only spend money with it. I start with DaVinci remote unlock… and nothing, just spend a few logs, and then I buy the Clip from JIC solutions… and nothing again, just money!!! Now I have a new USB-Smart dongle and still nothing too. I am using a T28 serial cable (I tray already a serial USB T28 cable too) and I get some errors. Trying to Read all codes, Read phone info and clear SP locks I get: Switch phone ON Get phone info Flash CID: 49 Phone KEY: A1_DB2000_49_RED ERROR: 305010 Can you give me please some help? Thank You! DCM Last edited by DarkCityMan; 06-05-2006 at 19:34.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
help to unlock my SE w850i cid 49	chris2007	FuriousGold	1	04-30-2009 02:28
SE K750i cid 49 unlock solution help	ksmiech	Sony Ericsson	10	12-16-2007 16:43
How to Unlock Se K750i CID 49? Hwk can´t Unlock, Se Tool 8.4 Craked can´t unlock.....	Grupo MovilFree	Sony Ericsson	5	01-18-2007 01:35
K600i cid 49 dead	lins97	SonyEricsson (USB-Smart)	1	02-23-2006 18:12
K600i Cid 49 died during unlock, need help	freedomizer	FuriouS II	6	01-20-2006 13:28

06-05-2006, 21:35	#2 (permalink)
fingusio No Life Poster Join Date: Oct 2002 Posts: 2,367 Member: 16927 Status: Offline Thanks Meter: 134	Try on interface UFSx/Twister, must work!!! br, fingusio

06-05-2006, 22:00	#3 (permalink)
agent003 No Life Poster Join Date: Dec 2002 Age: 46 Posts: 787 Member: 19094 Status: Offline Thanks Meter: 3	m8....if you take some time off for some literature there is no need to spend silly money... do your home work!! If you where serious about what you do you would also have ufs amongst your tools and that would be half work done BR

06-06-2006, 11:28	#5 (permalink)
DarkCityMan Junior Member Join Date: Jun 2006 Location: Portugal Posts: 6 Member: 286638 Status: Offline Thanks Meter: 0	Thank You Dr. Zulea. I will buy the 4in1 SonyEricsson Cruiser cable as you recommendation. I expect to have same news during next week. “Obrigado” DCM

06-12-2006, 11:27	#6 (permalink)
DarkCityMan Junior Member Join Date: Jun 2006 Location: Portugal Posts: 6 Member: 286638 Status: Offline Thanks Meter: 0	Hi Dr Zulea, You are Right!! Thank You!! It’s Done!! I buy a 4in1 Cable as your recommendation. Same difficulty at the beginning because the dongle don’t recognise the phone. So… First, I have to find a universal “USB Serial Drive”. I find it in “simsim” web page, then I have to define the correct serial port to this drive (Port 10 in my case), and then: Switch phone ON Get phone info Flash CID: 49 Phone KEY: A1_DB2000_49_RED OTP CID: 49 Phone IMEI: 356xxxxxxxxxxx Flash ID: 200D Switch phone ON Write Flashloader CID49 Waiting to finish Switch phone ON Start Flashloader CID49 Reading flash CXC version Version: R2T002_CXC1250014_EU_1_MI Send FLASH application Write GDFS Flashloader Switch phone ON Start GDFS Flashloader Setup GDFS Loader Read all codes IMEI: 35657200613510 Unlock NCK: 26205141 Unlock NSCK: 87339735 Unlock SPCK: 32239941 Unlock CCK: 98201250 Unlock PCK: 43806624 Unlock ECK: 62094421 Relock NCK: 27598868 Relock NSCK: 62337091 Relock SPCK: 74273331 Relock CCK: 77791162 Relock PCK: 71760589 Relock ECK: 30244266 User code: 0000 Switch phone ON Write Flashloader CID49 Waiting to finish Switch phone ON Start Flashloader CID49 Send FLASH application Recover first flash part Operation succesfull “Obrigado” Regards DCM

06-12-2006, 21:07	#7 (permalink)
kragel Freak Poster Join Date: Sep 2005 Location: Workshop Age: 48 Posts: 144 Member: 179394 Status: Offline Thanks Meter: 19	please help with dead k608i: Read phone info (SEMC 8.6 with 4 in 1): Switch phone ON ERROR: Certificate not find. Please use Recovery! Recover certificate: Recover certificate Switch phone ON Switch phone ON ERROR: Phone already have certificate!

06-13-2006, 02:41	#8 (permalink)
agent003 No Life Poster Join Date: Dec 2002 Age: 46 Posts: 787 Member: 19094 Status: Offline Thanks Meter: 3	This has to be something to do with checking the tespoint box i believe......give us a screen shot of the software from when you get these messages. BR