Sws Sagem Dongle :-read How To Make Cable And Solved Errors

[djyash]

HI all

with latest version it is working 100% .If you have key not found,then try to use a new windows .for me working on xp.Try also on another computer

If you have problem on 20,40 % then stop,it is 100% cable problem.

MAKE A NEW CABLE AND DON'T LOOK AT COLOUR WIRE .
LABEL EACH WIRE PIN1 ,PIN2 ,PIN3 ,PIN 4,PIN 5 ,PIN 6 ,PIN 7 ,PIN 8

DETAILS
RJ45 PIN 1 IS FOUND ON THE RIGHT HAND SIDE OF SWS BOX THAT IS ON THE RED LIGHT SIDE AND THE USB PORT.


RJ45 PIN 1 AND RJ45 PIN8=GND GOES TO PHONE CONNECTOR
RJ45 PIN2=TEST POINT
RJ45 PIN3=TEST POINT
RJ45 PIN4=RX GOES TO PHONE CONNECTOR
RJ45 PIN5=TX GOES TO PHONE CONNECTOR
RJ45 PIN6=TEST POINT
RJ45 PIN7=TEST POINT

LABEL EACH WIRE PIN1 ,PIN2 ,PIN3 ,PIN 4,PIN 5 ,PIN 6 ,PIN 7 ,PIN 8

WHEN UNLOCKING PHONE:-

Example myc5-2 testpoint on support page is:-

pin2 green ,pin 3 orange ,pin6 brown ,pin 7 blue.


Don't look for colour .just use pin number .

That is pin 2 ,pin 3 ,pin 6 ,pin 7

Now look on your wire pin number and solder to testpoint pin number.


Hope this can help you i have explain in very details,if any problem let me know.

Cheers
Djyash