FREE Unlock, NO TESTPOINT, C975 R245_U_82.21.91I (0.6.3.6) using GOT_MOTO - Page 8 - GSM-Forum

macrotech · 12-23-2006, 08:17

Quote:

Originally Posted by kidchaos

Tried... not working

will smart-clip help??? GOT is a killer

I'm using USB cable only....

GOT IS A KILLER! dont try to unlock your C975!!!

c975 (R245_U_xx_2x_xx) v91i unlocked successfully.thnx to got team.

Establish connection to handset
Switch handset to TCMD interface
Switch handset to FLASH interface
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0636
Sending RAMDLD to handset
RAMDLD started ok in handset
Read flash backup from handset
Save flash backup
Power down handset
Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0636
Sending RAMDLD to handset
RAMDLD started ok in handset
Set handset to blank mode
Power down handset
Establish connection to handset
FLASH Interface established ok
Bootcore version on handset: 0000
Sending RAMDLD to handset
RAMDLD started ok in handset
Started unlocking sequence
Power down handset
Unlocking sequence completed ok
Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0000
Sending RAMDLD to handset
RAMDLD started ok in handset
Try to load backup file
Recover handset from blank mode
Power down handset
Handset recovered from blank mode

Gsm_Expart · 12-23-2006, 08:52

Zulea is back wit GOT
thanks Zulea...

syl phone · 12-23-2006, 09:01

i ve a problem with gpt moto.
i m use usb cable .use driver p2k .phone not connected .
says
Establish connection to handset
ERROR: CNCTFLSHMODE 002
plz reply

pnganga · 12-23-2006, 09:02

To GOT Team, many thanks for this tool. I have used it on c975 bootloader 0.6.3.6. with no problem. Also tested on L7, unlocked easily. I dont think you could make the procedure any easier. If some users have problems understanding the instructions, they should not blame you. After all, we do understand English is not such a simple language...

pugsys · 12-23-2006, 09:48

Quote:

Originally Posted by pugsys

Split input file in codegroups:
Processed ok
Establish connection to handset
FLASH Interface established ok
Sending RAM loader ...
ERROR: USBCOM FLASHCMD 001
ERR: FLASH FLSFILE 004
ERR: FLASH FLSRAMLD 001
ERR: FLASH FLSCAT 003
ERROR: FLASHBIN 002

why

why my bootloader 6.3.1

iqballk · 12-23-2006, 09:58

G.O.T is not a zulia's project... u must fully charge ur battery b4 unlock.. no dead c975 with G.O.T.

tingweyw · 12-23-2006, 10:02

Hi
I just also want to thanks.

Walter

blueprint · 12-23-2006, 10:04

How can I get pass & Id to this Got site?

Anyone helppppppppp

Thanks in advance.

naje · 12-23-2006, 10:41

thanks a lot. i checked for c975 and its working 100%. Also I want to know whether this software working for other motorola models.

..::Mobile Smoker::.. · 12-23-2006, 12:15

got kill my c975
Unlocking sequence completed ok
Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0000
Sending RAMDLD to handset
RAMDLD started ok in handset
Try to load backup file
Recover handset from blank mode
Power down handset
Handset recovered from blank mode

now what should i do?

~mr_Ten$ion~ · 12-23-2006, 12:28

Thanx GOT ..... Now every ***** GOT GOT & GOT .... Gr8 work Bro
BR

ejazkhan9 · 12-23-2006, 12:30

Voilaaaaaaaa

91i done without any problem in less then 5 mins

Split input file in codegroups:
Processed ok
Establish connection to handset
Switch handset to TCMD interface
Switch handset to FLASH interface
FLASH Interface established ok
Sending RAM loader ...
RAM loader loaded OK
Erase flash...
Flashing codegroups ...
Flashing codegroup 'cg0.smg' to 10040000
Flashing codegroup 'cg1.smg' to 100400C8
Flashing codegroup 'cg2.smg' to 11580000
Flashing codegroup 'cg4.smg' to 11380000
Flashing codegroup 'cg5.smg' to 1104C4C8
Flashing codegroup 'cg8.smg' to 10028000
Flashing codegroup 'cg15.smg' to 11200000
Flashing codegroup 'cg17.smg' to 1101A4C8
Flashing codegroup 'cg18.smg' to 111FF800
Restarting phone
Done flashing.
Operation completed with success

Thx GOT

sajib_ngage · 12-23-2006, 13:31

Can anybody tell me about this cable? i have smart-motos cable.is it well work with GOT???

kidchaos · 12-23-2006, 13:53

Quote:

Originally Posted by bilal shah

got kill my c975
Unlocking sequence completed ok
Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0000
Sending RAMDLD to handset
RAMDLD started ok in handset
Try to load backup file
Recover handset from blank mode
Power down handset
Handset recovered from blank mode

now what should i do?

Please!! Stop posting "thanks" and focus on members who didin't made succesfull unlock! Now i have dead C975 and no software is going to help me! I've done everything OK.. GOT please assist!!!

There is another member who didin't made it.........

david laborator · 12-23-2006, 13:53

thank youuu got support . but alse i need your help i kill my k1 after unlock with got pleas help me

12-23-2006, 08:52	#107 (permalink)
Gsm_Expart Crazy Poster Join Date: May 2006 Location: inSide gSm Posts: 53 Member: 281948 Status: Offline Thanks Meter: 1	Zulea is back wit GOT thanks Zulea... Last edited by Gsm_Expart; 12-23-2006 at 09:29.

12-23-2006, 09:01	#108 (permalink)
syl phone No Life Poster Join Date: Jul 2006 Location: loading........ Age: 44 Posts: 609 Member: 320823 Status: Offline Thanks Meter: 1,592	suport got_moto i ve a problem with gpt moto. i m use usb cable .use driver p2k .phone not connected . says Establish connection to handset ERROR: CNCTFLSHMODE 002 plz reply

12-23-2006, 09:02	#109 (permalink)
pnganga No Life Poster Join Date: Jun 2004 Location: Kenya Posts: 1,307 Member: 70343 Status: Offline Thanks Meter: 38	Thanks! To GOT Team, many thanks for this tool. I have used it on c975 bootloader 0.6.3.6. with no problem. Also tested on L7, unlocked easily. I dont think you could make the procedure any easier. If some users have problems understanding the instructions, they should not blame you. After all, we do understand English is not such a simple language...

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
NEED FLAS FILES FOR C975 R245_u_82.21.91i v6.3.6	.:KHALIFA:.	Smart-Clip	2	04-02-2007 11:39
Failed unlock C975 R245_U_82.21.91I *SOLVED	haller	Ultima Box Light	1	02-14-2007 04:43
Succesfull unlocked C975 R245_U_82.21.91I (0.6.3.6)	::.::RAMJAN::.::	Motorola P2k	2	01-04-2007 00:09
C975 R245_u_82.21.91i	Spetsnaz	Motorola Hardware Repair	10	12-25-2006 16:29
C975 R245_U_82.21.91I bootloear 0.5.F.1!	taihv	Motorola P2K (USB-Smart)	1	06-05-2006 07:47

12-23-2006, 09:58	#111 (permalink)
iqballk No Life Poster Join Date: Jul 2002 Location: sri lanka Age: 39 Posts: 1,436 Member: 13932 Status: Offline Sonork: 100.1609876 Thanks Meter: 411	G.O.T is not a zulia's project... u must fully charge ur battery b4 unlock.. no dead c975 with G.O.T.

12-23-2006, 10:02	#112 (permalink)
tingweyw Junior Member Join Date: Sep 2003 Location: Douala CAMEROON Posts: 4 Member: 39789 Status: Offline Thanks Meter: 0	Hi I just also want to thanks. Walter

12-23-2006, 10:04	#113 (permalink)
blueprint Freak Poster Join Date: Apr 2005 Location: Paris Posts: 223 Member: 139718 Status: Offline Thanks Meter: 4	How can I get pass & Id to this Got site? Anyone helppppppppp Thanks in advance.

12-23-2006, 10:41	#114 (permalink)
naje No Life Poster Join Date: Apr 2004 Location: srilanka Posts: 1,089 Member: 61595 Status: Offline Sonork: 100.1610188 Thanks Meter: 97	thanks a lot. i checked for c975 and its working 100%. Also I want to know whether this software working for other motorola models.

12-23-2006, 12:15	#115 (permalink)
..::Mobile Smoker::.. No Life Poster Join Date: Aug 2005 Location: Pakistan Posts: 2,436 Member: 170380 Status: Offline Sonork: 100.1577994 Thanks Meter: 3,022	got kill my c975 Unlocking sequence completed ok Establish connection to handset FLASH Interface established ok Read handset bootcore version Bootcore version on handset: 0000 Sending RAMDLD to handset RAMDLD started ok in handset Try to load backup file Recover handset from blank mode Power down handset Handset recovered from blank mode now what should i do?

12-23-2006, 12:28	#116 (permalink)
~mr_Ten$ion~ No Life Poster Join Date: Apr 2005 Location: .... Ghari Matani ...... Age: 18 Posts: 1,954 Member: 135601 Status: Offline Sonork: 100.1612518 Thanks Meter: 68	Thanx GOT ..... Now every ***** GOT GOT & GOT .... Gr8 work Bro BR

12-23-2006, 12:30	#117 (permalink)
ejazkhan9 No Life Poster Join Date: Mar 2005 Location: Pakistan Posts: 1,268 Member: 131118 Status: Offline Thanks Meter: 40	Voilaaaaaaaa 91i done without any problem in less then 5 mins Split input file in codegroups: Processed ok Establish connection to handset Switch handset to TCMD interface Switch handset to FLASH interface FLASH Interface established ok Sending RAM loader ... RAM loader loaded OK Erase flash... Flashing codegroups ... Flashing codegroup 'cg0.smg' to 10040000 Flashing codegroup 'cg1.smg' to 100400C8 Flashing codegroup 'cg2.smg' to 11580000 Flashing codegroup 'cg4.smg' to 11380000 Flashing codegroup 'cg5.smg' to 1104C4C8 Flashing codegroup 'cg8.smg' to 10028000 Flashing codegroup 'cg15.smg' to 11200000 Flashing codegroup 'cg17.smg' to 1101A4C8 Flashing codegroup 'cg18.smg' to 111FF800 Restarting phone Done flashing. Operation completed with success Thx GOT

12-23-2006, 13:31	#118 (permalink)
sajib_ngage Temporary banned !! Join Date: Mar 2006 Location: Dhaka, Bangladesh Age: 37 Posts: 2,359 Member: 243500 Status: Offline Sonork: 100.1590322 Thanks Meter: 584	Can anybody tell me about this cable? i have smart-motos cable.is it well work with GOT???

12-23-2006, 13:53	#120 (permalink)
david laborator No Life Poster Join Date: Feb 2006 Location: Tanzania but U cant see me !!! Age: 43 Posts: 887 Member: 228601 Status: Offline Thanks Meter: 56	thank youuu got support . but alse i need your help i kill my k1 after unlock with got pleas help me