@ Got Support C975 91i - GSM-Forum

Afzaal · 01-22-2007, 07:33

I got a Dead C975 91i which was killed by Unlocking sequence of other tool.
When ever i try to connect with PC it showed "Unknown Device Detected "
So made TP and Phone Got Detected in Flash Mode.
repaired PDS All Okay.

Establish connection to handset
FLASH Interface established ok
Bootcore version on handset: 0310
Sending RAMDLD to handset
RAMDLD started ok in handset
Read Flash chip type and ID
Flash chip ID detected: 0x002C44C9
Write PDS zone on flash chip
Rebuild PDS checksums on handset
Write Bootcore zone on flash chip
Power down handset
Rebuild PDS procedure completed ok
_______________________________
So I downloaded FF from Support.
"R245_U_82.21.91I_LP0039_DRM0101_JPAT_R245H3GC975_ 01_SE4936AXXW800C_1FF.gtc"
and tried to FF but Now Got is Showing me this Error.

Split input file in codegroups:
Processed ok
Establish connection to handset
FLASH Interface established ok
Sending RAMDLD to handset
RAMDLD started ok in handset
Erase flash...
Error: 01120004
Error: 01240004
________________________
What should i Do next any enlighting???.

BR.

Afzaal · 01-22-2007, 08:38

Now i Repair PDS with SC.
...................................
And FF with GOT

Herez Result

Split input file in codegroups:
Processed ok
Establish connection to handset
FLASH Interface established ok
Sending RAMDLD to handset
RAMDLD started ok in handset
Erase flash...
Flashing codegroups ...
Flashing codegroup 'cg0.smg' to 10040000
Flashing codegroup 'cg1.smg' to 100400C8
Flashing codegroup 'cg2.smg' to 11580000
Flashing codegroup 'cg4.smg' to 11380000
Flashing codegroup 'cg5.smg' to 1104C4C8
Flashing codegroup 'cg8.smg' to 10028000
Flashing codegroup 'cg15.smg' to 11200000
Flashing codegroup 'cg17.smg' to 1101A4C8
Flashing codegroup 'cg18.smg' to 111FF800
Restarting phone
Done flashing
Operation completed with success

Phone is Alive

Split input file in codegroups:
Processed ok
Establish connection to handset
Switch handset to TCMD interface
Switch handset to FLASH interface
FLASH Interface established ok
Sending RAMDLD to handset
RAMDLD started ok in handset
Erase flash...
Flashing codegroups ...
Flashing codegroup 'cg0.smg' to 10040000
Flashing codegroup 'cg1.smg' to 100400C8
Flashing codegroup 'cg2.smg' to 11580000
Flashing codegroup 'cg4.smg' to 11380000
Flashing codegroup 'cg5.smg' to 1104C4C8
Flashing codegroup 'cg8.smg' to 10028000
Flashing codegroup 'cg15.smg' to 11200000
Flashing codegroup 'cg17.smg' to 1101A4C8
Flashing codegroup 'cg18.smg' to 111FF800
Restarting phone
Done flashing
Operation completed with success

Phone is Unlocked

thanks SC & GOT

nnaeem11 · 01-22-2007, 10:50

i didn't find the patched unlock file in R245 C975 model for 91i

NAEEM FAROOQUI

..::Mr999::.. · 01-22-2007, 11:50

Quote:

i didn't find the patched unlock file in R245 C975 model for 91i

NAEEM FAROOQUI

Patched for Unlock
Full Flash For Repiar

Br

nnaeem11 · 01-22-2007, 14:50

after doing the unlock to C975 that is not 91i phone got dead and after that if u try to boot it in bootloader mode it's giving error:3
and then it shows the bootloader screen like

boot loader 0.6.3.6
SW Version:
R245_u_82.21.80I

Battery OK
OK to Program
Transfer Mode:
Serial RS-232

if try to flash it with patched unlocker it give error like

Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0000
Sending RAMDLD to handset
Error: 30000202
Error: 30050202

NAEEM FAROOQUI.

again after this if u try again connected to flash but after half min got off mobile.

Split input file in codegroups:
Processed ok
Establish connection to handset
Error: 02020002
FLASH Interface established ok
Sending RAMDLD to handset
Error: 01010004
Error: 01040001
Error: 01120003
Error: 01230002

Afzaal · 01-22-2007, 15:20

1st of All u haven't installed complete drivers.
2nd u put phone in flash mode before any operation.
when ever u do any process with GOT moto u should b careful abt Driver installation.
2ndly let software to put ur phone in flash mode.
u don't need to put phone in flash mode.
all u just have to do
complete driver installation
if u can't
check sticky threads.
now run got.
put fone in flash mode
connect with pc.
if got can detect ur phone in flash mode.
repair pds and Full flash with gtc file.from the support.
1st make it alive then flash with patch file.
theres nothing wrong with 80i or 91i f/w
i tested both working.
do steps and post result.
good luck.

nnaeem11 · 01-24-2007, 15:29

Establish connection to handset
FLASH Interface established ok
Error: 30090003

repair PDS

------------------------------------------------------------

when doing SET BLANK

Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0000
Sending RAMDLD to handset
Error: 01050002
Error: 30030202

what i do next to recover the phone

phone is in Boot loader mode and the start with error:0

then show the bootloader screen

NAEEM FAROOQUI.

i have tried the repair flash it can't get in
i have tried the unlock patched file it can't get in

phone connect only in bootloader mode

01-22-2007, 07:33	#1 (permalink)
Afzaal No Life Poster Join Date: Mar 2005 Location: lets See. Posts: 3,399 Member: 128918 Status: Offline Thanks Meter: 282	@ Got Support C975 91i I got a Dead C975 91i which was killed by Unlocking sequence of other tool. When ever i try to connect with PC it showed "Unknown Device Detected " So made TP and Phone Got Detected in Flash Mode. repaired PDS All Okay. Establish connection to handset FLASH Interface established ok Bootcore version on handset: 0310 Sending RAMDLD to handset RAMDLD started ok in handset Read Flash chip type and ID Flash chip ID detected: 0x002C44C9 Write PDS zone on flash chip Rebuild PDS checksums on handset Write Bootcore zone on flash chip Power down handset Rebuild PDS procedure completed ok _______________________________ So I downloaded FF from Support. "R245_U_82.21.91I_LP0039_DRM0101_JPAT_R245H3GC975_ 01_SE4936AXXW800C_1FF.gtc" and tried to FF but Now Got is Showing me this Error. Split input file in codegroups: Processed ok Establish connection to handset FLASH Interface established ok Sending RAMDLD to handset RAMDLD started ok in handset Erase flash... Error: 01120004 Error: 01240004 ________________________ What should i Do next any enlighting???. BR.

01-22-2007, 08:38	#2 (permalink)
Afzaal No Life Poster Join Date: Mar 2005 Location: lets See. Posts: 3,399 Member: 128918 Status: Offline Thanks Meter: 282	Now i Repair PDS with SC. ................................... And FF with GOT Herez Result Split input file in codegroups: Processed ok Establish connection to handset FLASH Interface established ok Sending RAMDLD to handset RAMDLD started ok in handset Erase flash... Flashing codegroups ... Flashing codegroup 'cg0.smg' to 10040000 Flashing codegroup 'cg1.smg' to 100400C8 Flashing codegroup 'cg2.smg' to 11580000 Flashing codegroup 'cg4.smg' to 11380000 Flashing codegroup 'cg5.smg' to 1104C4C8 Flashing codegroup 'cg8.smg' to 10028000 Flashing codegroup 'cg15.smg' to 11200000 Flashing codegroup 'cg17.smg' to 1101A4C8 Flashing codegroup 'cg18.smg' to 111FF800 Restarting phone Done flashing Operation completed with success Phone is Alive Split input file in codegroups: Processed ok Establish connection to handset Switch handset to TCMD interface Switch handset to FLASH interface FLASH Interface established ok Sending RAMDLD to handset RAMDLD started ok in handset Erase flash... Flashing codegroups ... Flashing codegroup 'cg0.smg' to 10040000 Flashing codegroup 'cg1.smg' to 100400C8 Flashing codegroup 'cg2.smg' to 11580000 Flashing codegroup 'cg4.smg' to 11380000 Flashing codegroup 'cg5.smg' to 1104C4C8 Flashing codegroup 'cg8.smg' to 10028000 Flashing codegroup 'cg15.smg' to 11200000 Flashing codegroup 'cg17.smg' to 1101A4C8 Flashing codegroup 'cg18.smg' to 111FF800 Restarting phone Done flashing Operation completed with success Phone is Unlocked thanks SC & GOT Last edited by Afzaal; 01-22-2007 at 08:53.

01-22-2007, 10:50	#3 (permalink)
nnaeem11 No Life Poster Join Date: May 2005 Location: MIND MAKING COMPANY Age: 44 Posts: 1,686 Member: 144640 Status: Offline Sonork: nnaeem11 Thanks Meter: 238	i didn't find the patched unlock file in R245 C975 model for 91i NAEEM FAROOQUI

01-22-2007, 14:50	#5 (permalink)
nnaeem11 No Life Poster Join Date: May 2005 Location: MIND MAKING COMPANY Age: 44 Posts: 1,686 Member: 144640 Status: Offline Sonork: nnaeem11 Thanks Meter: 238	after doing the unlock to C975 that is not 91i phone got dead and after that if u try to boot it in bootloader mode it's giving error:3 and then it shows the bootloader screen like boot loader 0.6.3.6 SW Version: R245_u_82.21.80I Battery OK OK to Program Transfer Mode: Serial RS-232 if try to flash it with patched unlocker it give error like Establish connection to handset FLASH Interface established ok Read handset bootcore version Bootcore version on handset: 0000 Sending RAMDLD to handset Error: 30000202 Error: 30050202 NAEEM FAROOQUI. again after this if u try again connected to flash but after half min got off mobile. Split input file in codegroups: Processed ok Establish connection to handset Error: 02020002 FLASH Interface established ok Sending RAMDLD to handset Error: 01010004 Error: 01040001 Error: 01120003 Error: 01230002

01-22-2007, 15:20	#6 (permalink)
Afzaal No Life Poster Join Date: Mar 2005 Location: lets See. Posts: 3,399 Member: 128918 Status: Offline Thanks Meter: 282	1st of All u haven't installed complete drivers. 2nd u put phone in flash mode before any operation. when ever u do any process with GOT moto u should b careful abt Driver installation. 2ndly let software to put ur phone in flash mode. u don't need to put phone in flash mode. all u just have to do complete driver installation if u can't check sticky threads. now run got. put fone in flash mode connect with pc. if got can detect ur phone in flash mode. repair pds and Full flash with gtc file.from the support. 1st make it alive then flash with patch file. theres nothing wrong with 80i or 91i f/w i tested both working. do steps and post result. good luck.

01-24-2007, 15:29	#7 (permalink)
nnaeem11 No Life Poster Join Date: May 2005 Location: MIND MAKING COMPANY Age: 44 Posts: 1,686 Member: 144640 Status: Offline Sonork: nnaeem11 Thanks Meter: 238	Establish connection to handset FLASH Interface established ok Error: 30090003 repair PDS ------------------------------------------------------------ when doing SET BLANK Establish connection to handset FLASH Interface established ok Read handset bootcore version Bootcore version on handset: 0000 Sending RAMDLD to handset Error: 01050002 Error: 30030202 what i do next to recover the phone phone is in Boot loader mode and the start with error:0 then show the bootloader screen NAEEM FAROOQUI. i have tried the repair flash it can't get in i have tried the unlock patched file it can't get in phone connect only in bootloader mode