A Lot Of People Big Problem With Uid - GSM-Forum

Fonetec · 10-04-2007, 23:26

I read alot of threads regarding phones being unlocked but really not unlocked.

This has happened to me. 6233/6280/6288/N91 UID & DSS say phone unlocked but really nothing is unlocked.

Does not matter if I use UID on it's own and enter code via keypad same story wrong code/not allowed bla bla bla bla.

The other common problem is wrong challenge code bla bla bla......

This is BS and needs to be addressed.

TP's are 100% correct and software version is supported version for unlock.

I don't know about you people but I am very pi$$ed off with this box because it never works properly, the only phones I have manged to unlock are the 6300 and N73 that is it. I am not beginner in this game I have been working with phones for 10 years + and this without a doubt is the most annoying pile of $hit software/box I have used.

I payed good money for this product and I am not happy with the performance. I cannot understand why many people are having this same problems it cannot just be coincidence, there must be a problem somewhere and I want to find out what.

If anyone is having the same problems as me please post here stating model/software version/flash chip type.

If anyone here has had these probems and over come them please post here stating how.

I have lost alot of money over the past 2 weeks because of this problem, the funny thing is these phones I can't unlock with UID I bring to my friend with MT Lite and they unlock first try no messing around with me unlocking them !!!

There is defo a problem with this box/product please I need to sort this out ASAP before I go and buy MT(which I wish I bought in the first place.)

If any one has anything constuctive to say please post if not then don't bother.

Regards Fonetec

oOXTCOo · 10-05-2007, 00:02

use locklevel +7 (multilock)

this happend when more locks are closed and you unlock only locklevel 1 + 2 !

i have no problem with uid, i unlock all phones without any problems...

oOXTCOo · 10-05-2007, 00:03

if you whant, send phones to me (austria) i unlock it for you for free with uid to show you it works...

Fonetec · 10-05-2007, 00:12

CONFIG KEY: 2342000000000000
Provider: Hutchinson 3G (3);United Kingdom
Key Code count: 2, FBUS Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 23420F

This is the last phone I try to unlock we uid & dss.

This phone is block 1 locked only !

Uid & Dss say unlocked but not unlocked.

I tell you what why you don't come to Uk London and show me this box working ?

electrosoft · 10-05-2007, 00:24

hi
if Uid & Dss say unlocked but not unlocked it is 100/100 testpoint problem
br!

Gsm-W · 10-05-2007, 02:43

Quote:

Originally Posted by Fonetec

CONFIG KEY: 2342000000000000
Provider: Hutchinson 3G (3);United Kingdom
Key Code count: 2, FBUS Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 23420F

This is the last phone I try to unlock we uid & dss.

This phone is block 1 locked only !

Uid & Dss say unlocked but not unlocked.

I tell you what why you don't come to Uk London and show me this box working ?

Hi,

(1) Wait the phone restart after bb5unlock exec
(2) UID have some bad behaviour

Unlock the phone in offline/rf inactive mode!! And wait the phone restart after bb5unlock exec.

BR

SLIPLOCK · 10-05-2007, 04:26

hi guys.
i have the same box, and i have try to unlock 7370 v4.13
i have try to send code via ufs/dku2/jaf com emulator/keypad and always code error.
so, i have questions about testpoint.
1) must the testpoint be solder or can i use needle for DATA & CLK and sold only GND. (is GND required, cause i think all the GND are wired via USB bus)
2) is there an order for testpoint (i mean first do testpoint and after power the phone or vice versa)
3) DId the connection beetwen box and phone have a specific impedance? (i
means bad solder can create inductance etc).

So finally, my opinion is the hardware of this box is neede for unlock bb5, but i think the product is not totaly finished. and more info are needed for have a good product

regards

E_H · 10-05-2007, 04:38

UID works perfect i dont know why people complain

Gsm-W · 10-05-2007, 04:43

Quote:

Originally Posted by SLIPLOCK

hi guys.
i have the same box, and i have try to unlock 7370 v4.13
i have try to send code via ufs/dku2/jaf com emulator/keypad and always code error.
so, i have questions about testpoint.
1) must the testpoint be solder or can i use needle for DATA & CLK and sold only GND. (is GND required, cause i think all the GND are wired via USB bus)
2) is there an order for testpoint (i mean first do testpoint and after power the phone or vice versa)
3) DId the connection beetwen box and phone have a specific impedance? (i
means bad solder can create inductance etc).

So finally, my opinion is the hardware of this box is neede for unlock bb5, but i think the product is not totaly finished. and more info are needed for have a good product

regards

Must solder VGA8(GND) to mobile else you are getting really hard time to unlock!!

BR

SLIPLOCK · 10-05-2007, 04:52

@********-TOOLS
i don't says that uid is bad product, but i post here because i have problem to unlock this phone.
regards

SLIPLOCK · 10-05-2007, 04:54

@Gsm-W
thanks for the tricks, and for DATA and CLK, can i use needle or must i solder ?
and what about the impedance?
thanks for help
regards

Gsm-W · 10-05-2007, 07:59

Quote:

Originally Posted by SLIPLOCK

@Gsm-W
thanks for the tricks, and for DATA and CLK, can i use needle or must i solder ?
and what about the impedance?
thanks for help
regards

No problem ....but soldering is much more recommended!!

Anyway wait the phone restart even bb5unlock successfull

BR

Fonetec · 10-05-2007, 09:47

We are complain because we cannot get box to work that is why !!!

Fonetec · 10-05-2007, 09:58

Today I try to unlock N73 here is log :

Server: [70.85.181.2], port: [35555]
Will use server 70.85.181.2 to port 35555
BB5 box connected, awaiting commands.
Request box ID.
************************************************** ************************************
BOX INFO: ID: xxxxxx, VERSION: beef, HW_REV: cb, SW_REV: 01
************************************************** ************************************
Connecting server...Server conected.
Requesting data...Got page, exiting!
Got auth: [9feebf7aa2a40b046dbaf3ac88f7664624a53dcf14e752e6d7 b237aeaed5f3a300], ssid: [119157444315201]
Incoming auth_req len: 33
9f ee bf 7a a2 a4 0b 04 6d ba f3 ac 88 f7 66 46 24 a5 3d cf 14 e7 52 e6 d7 b2 37 ae ae d5 f3 a3 59
Requested Secret
**SECRET_ANSWER:
0d2fbeef114205fa97dff256076fb5e6e295a6fe2ab67c1387 2c7aa34239a56797bca2972f
Connecting server...Server conected.
Requesting data...Got page, exiting!
Got unlock block: [cb9304b03187c94f4e4668fda97ebd9d3e2bf6b67e14a06fb7 53264574e1fcc61cb807671341af08f36327280f9af9ecd8ff 80c41bfb22697db61f39d570e27f13263d472c5a6de343fa35 1e9e15c2530c59c5b28216f3c1ad3d0aaadbfe1a3d0c0954ec adfa810c1d75d97ae2fe80544dc620da9c61ea5600eb7ee40d a33d1b00]
Sending UNLOCK string(128 bytes)
unl_log: 01
unl_log: 02
unl_log: 30
unl_log: 03
unl_log: 33
Please press '#pw+323039235464818+1#' on phone keypad NOW!
Testing challenge code 03
Testing challenge code 02
Incomplete challenge - code missing. Box will try again in about 20 seconds
Box ready to retry!
unl_log: 04
unl_log: 03
unl_log: 33
Please press '#pw+306833310985818+1#' on phone keypad NOW!

This is with uid & dss connected via fbus.

why this error ?

Two days ago I unlocked N73 with no problems ?

why?

Gsm-W · 10-05-2007, 12:46

HI,

How to say ...disconnect everything and receonnect back everything and use offline mode to unlock n73 will save your ***...

Read n95 manual will help ....

BR

10-04-2007, 23:26	#1 (permalink)
Fonetec Freak Poster Join Date: Mar 2005 Location: LONDON TOWN Posts: 404 Member: 129507 Status: Offline Thanks Meter: 10	A Lot Of People Big Problem With Uid I read alot of threads regarding phones being unlocked but really not unlocked. This has happened to me. 6233/6280/6288/N91 UID & DSS say phone unlocked but really nothing is unlocked. Does not matter if I use UID on it's own and enter code via keypad same story wrong code/not allowed bla bla bla bla. The other common problem is wrong challenge code bla bla bla...... This is BS and needs to be addressed. TP's are 100% correct and software version is supported version for unlock. I don't know about you people but I am very pi$$ed off with this box because it never works properly, the only phones I have manged to unlock are the 6300 and N73 that is it. I am not beginner in this game I have been working with phones for 10 years + and this without a doubt is the most annoying pile of $hit software/box I have used. I payed good money for this product and I am not happy with the performance. I cannot understand why many people are having this same problems it cannot just be coincidence, there must be a problem somewhere and I want to find out what. If anyone is having the same problems as me please post here stating model/software version/flash chip type. If anyone here has had these probems and over come them please post here stating how. I have lost alot of money over the past 2 weeks because of this problem, the funny thing is these phones I can't unlock with UID I bring to my friend with MT Lite and they unlock first try no messing around with me unlocking them !!! There is defo a problem with this box/product please I need to sort this out ASAP before I go and buy MT(which I wish I bought in the first place.) If any one has anything constuctive to say please post if not then don't bother. Regards Fonetec

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
big problem with my mx key	sshreesai	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	4	03-31-2010 10:07
Lot of Gradiente gf760 problem...	edcentec	Infinity-Box	23	08-13-2008 19:46
big big big big big problem with server	software zone	FuriousGold	1	01-16-2008 17:25
bIG PROBLEM WITH uid BOX	subzeven	UID - Box	8	09-19-2007 23:30
big probleme with my uid	tlemcen	UID - Box	2	09-15-2007 18:24

10-05-2007, 00:02	#2 (permalink)
oOXTCOo No Life Poster Join Date: Dec 2000 Location: J.A.U - Just Another Unlocker Age: 43 Posts: 3,498 Member: 2878 Status: Offline Thanks Meter: 9,123	use locklevel +7 (multilock) this happend when more locks are closed and you unlock only locklevel 1 + 2 ! i have no problem with uid, i unlock all phones without any problems...

10-05-2007, 00:03	#3 (permalink)
oOXTCOo No Life Poster Join Date: Dec 2000 Location: J.A.U - Just Another Unlocker Age: 43 Posts: 3,498 Member: 2878 Status: Offline Thanks Meter: 9,123	if you whant, send phones to me (austria) i unlock it for you for free with uid to show you it works...

10-05-2007, 00:12	#4 (permalink)
Fonetec Freak Poster Join Date: Mar 2005 Location: LONDON TOWN Posts: 404 Member: 129507 Status: Offline Thanks Meter: 10	CONFIG KEY: 2342000000000000 Provider: Hutchinson 3G (3);United Kingdom Key Code count: 2, FBUS Code count: 0 Block 1: Lock 1: CLOSED -> Lock Data: 23420F This is the last phone I try to unlock we uid & dss. This phone is block 1 locked only ! Uid & Dss say unlocked but not unlocked. I tell you what why you don't come to Uk London and show me this box working ?

10-05-2007, 00:24	#5 (permalink)
electrosoft Freak Poster Join Date: Nov 2004 Location: Tunisia Age: 43 Posts: 388 Member: 93850 Status: Offline Thanks Meter: 48	hi if Uid & Dss say unlocked but not unlocked it is 100/100 testpoint problem br!

10-05-2007, 04:26	#7 (permalink)
SLIPLOCK No Life Poster Join Date: Oct 2004 Location: Galaxy Age: 46 Posts: 1,260 Member: 86301 Status: Offline Thanks Meter: 107	hi guys. i have the same box, and i have try to unlock 7370 v4.13 i have try to send code via ufs/dku2/jaf com emulator/keypad and always code error. so, i have questions about testpoint. 1) must the testpoint be solder or can i use needle for DATA & CLK and sold only GND. (is GND required, cause i think all the GND are wired via USB bus) 2) is there an order for testpoint (i mean first do testpoint and after power the phone or vice versa) 3) DId the connection beetwen box and phone have a specific impedance? (i means bad solder can create inductance etc). So finally, my opinion is the hardware of this box is neede for unlock bb5, but i think the product is not totaly finished. and more info are needed for have a good product regards

10-05-2007, 04:38	#8 (permalink)
E_H No Life Poster Join Date: Jul 2007 Location: Telegram Aceunlock Posts: 1,101 Member: 549784 Status: Offline Thanks Meter: 167	UID works perfect i dont know why people complain

10-05-2007, 04:52	#10 (permalink)
SLIPLOCK No Life Poster Join Date: Oct 2004 Location: Galaxy Age: 46 Posts: 1,260 Member: 86301 Status: Offline Thanks Meter: 107	@********-TOOLS i don't says that uid is bad product, but i post here because i have problem to unlock this phone. regards

10-05-2007, 04:54	#11 (permalink)
SLIPLOCK No Life Poster Join Date: Oct 2004 Location: Galaxy Age: 46 Posts: 1,260 Member: 86301 Status: Offline Thanks Meter: 107	@Gsm-W thanks for the tricks, and for DATA and CLK, can i use needle or must i solder ? and what about the impedance? thanks for help regards

10-05-2007, 09:47	#13 (permalink)
Fonetec Freak Poster Join Date: Mar 2005 Location: LONDON TOWN Posts: 404 Member: 129507 Status: Offline Thanks Meter: 10	We are complain because we cannot get box to work that is why !!!

10-05-2007, 09:58	#14 (permalink)
Fonetec Freak Poster Join Date: Mar 2005 Location: LONDON TOWN Posts: 404 Member: 129507 Status: Offline Thanks Meter: 10	Today I try to unlock N73 here is log : Server: [70.85.181.2], port: [35555] Will use server 70.85.181.2 to port 35555 BB5 box connected, awaiting commands. Request box ID. ************************************************ ******************************** BOX INFO: ID: xxxxxx, VERSION: beef, HW_REV: cb, SW_REV: 01 ********************************************** ******************************** Connecting server...Server conected. Requesting data...Got page, exiting! Got auth: [9feebf7aa2a40b046dbaf3ac88f7664624a53dcf14e752e6d7 b237aeaed5f3a300], ssid: [119157444315201] Incoming auth_req len: 33 9f ee bf 7a a2 a4 0b 04 6d ba f3 ac 88 f7 66 46 24 a5 3d cf 14 e7 52 e6 d7 b2 37 ae ae d5 f3 a3 59 Requested Secret SECRET_ANSWER: 0d2fbeef114205fa97dff256076fb5e6e295a6fe2ab67c1387 2c7aa34239a56797bca2972f Connecting server...Server conected. Requesting data...Got page, exiting! Got unlock block: [cb9304b03187c94f4e4668fda97ebd9d3e2bf6b67e14a06fb7 53264574e1fcc61cb807671341af08f36327280f9af9ecd8ff 80c41bfb22697db61f39d570e27f13263d472c5a6de343fa35 1e9e15c2530c59c5b28216f3c1ad3d0aaadbfe1a3d0c0954ec adfa810c1d75d97ae2fe80544dc620da9c61ea5600eb7ee40d a33d1b00] Sending UNLOCK string(128 bytes) unl_log: 01 unl_log: 02 unl_log: 30 unl_log: 03 unl_log: 33 Please press '#pw+323039235464818+1#' on phone keypad NOW! Testing challenge code 03 Testing challenge code 02 Incomplete challenge - code missing. Box will try again in about 20 seconds Box ready to retry! unl_log: 04 unl_log: 03 unl_log: 33 Please press '#pw+306833310985818+1#' on phone keypad NOW! This is with uid & dss connected via fbus. why this error ? Two days ago I unlocked N73 with no problems ? why?

10-05-2007, 12:46	#15 (permalink)
Gsm-W No Life Poster Join Date: Jul 2004 Age: 42 Posts: 935 Member: 72851 Status: Offline Thanks Meter: 28	HI, How to say ...disconnect everything and receonnect back everything and use offline mode to unlock n73 will save your ***... Read n95 manual will help .... BR