N95 Rm-17
 

CHINESE N95 2-SIM (10 PINS CONNECTOR ) PINS DETECTED SUCCEFULLY WITH MCTOOL BUT CAN'T READ OR FORMAT IT !!!!!!!!!!!!!!!!!!!!!
WHEN I SHOULD POWER KEEP IT ON , PHONE DOESN'T RESPOND ?????????:eek:

BY THE WAY THIS MY FIRST ONCE WITH THIS NEW TOOL

give me picture after found pinout...

here u r boss
 

here's the picture ( battry always inserted ) ... by the way , today the box found deffirent pinouts not same as yesterday !!!!!!!!!!!!!!!!!

Go to Pinout section,
After write Pinout settings to box, Set box Resistance to "Low" and then go back to MTK and detect phone without problem.

or mark auto wirte settings to box

again
 

i made as u asked me to do but always same prob .... pinouts detection ok, but can't applicate any function ( formating, imei change, read flash ..... etc ) !!!!!!!!!!!!!!!! :(
please any other idea ?

brother nabil this probleme have one solution u can solve it with spider man box cracked it work free and it is good tool

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!! :eek:

why ?????????????????????????????????????????????????? ???

here u r boss

--------------------------------------------------------------------------------

here's the picture ( battry always inserted ) ... by the way , today the box found deffirent pinouts not same as yesterday !!!!!!!!!!!!!!!!!
Attached Thumbnails



brothe when you are finding pinouts then see what type of cpu you have i think when you first read you have mtk cpu then 2nd time you change .....thats why your phone is not booting ......... select mtk cpuand do not connect battery use suplly from crocodile cable problem solved try and post result ............


wbr
varun

always same
 

i don't know where's exactly the pro !!!!!!!!!!!!!!!!!!!!!!! i used all advices at thread but nothing ............. phone pinouts can be detected, but other functions can't be applicated !!!!!!!!!!!!!!!!!!!!!

can u give me full explication please ? :mad:

as i know this the pin out of rm17 n95
1. gnd
5. rxd
6. txd

try that n set manualy..
the do what u want with mctool..

br

bnc

sir .... there's no deference between manual and automatic pinouts finding .... and if that's the good solution , so what will i do with other models ????????????? and what is the advantage for that box ?????????? we used this box while there's other 2 box canflash chinese mobiles .... and we always think that vahid is working as first in the wirld by his specialist box !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

please try to give full and usefull explication ....... maybe its another hardware problem ????????????!!!!!!!!!!!!!!!!!:mad::mad::mad:

did u check ur pcb ?
ther is first batch of stock in which u have to remove resistor

use search botton to get the pcb picture

i ask to set manualy cause i see u find pin out different with what i have get before.. (N95 rm17 slide up and down)
cause may be mctools have little problem when detect the phone u get now.. so i give manual setup.. so at least u can do n flashing the phone..
so let wait vahid improve his s.w so can detect corectly..
or another problem.. can be problem at ur phone.. (this may be yes.. may be no..) cause mc tools detect not correct..
may be some faulty in connector 10pin..
cmiiw..
just want to help..

thank u

BR

BnC