N95 Rm-17 - GSM-Forum

nabildeco@yahoo · 02-01-2008, 13:49

CHINESE N95 2-SIM (10 PINS CONNECTOR ) PINS DETECTED SUCCEFULLY WITH MCTOOL BUT CAN'T READ OR FORMAT IT !!!!!!!!!!!!!!!!!!!!!
WHEN I SHOULD POWER KEEP IT ON , PHONE DOESN'T RESPOND ?????????

BY THE WAY THIS MY FIRST ONCE WITH THIS NEW TOOL

BesTCooL · 02-02-2008, 01:08

give me picture after found pinout...

nabildeco@yahoo · 02-02-2008, 08:38

here's the picture ( battry always inserted ) ... by the way , today the box found deffirent pinouts not same as yesterday !!!!!!!!!!!!!!!!!

VsH-GsM · 02-02-2008, 14:40

Go to Pinout section,
After write Pinout settings to box, Set box Resistance to "Low" and then go back to MTK and detect phone without problem.

BesTCooL · 02-02-2008, 14:48

or mark auto wirte settings to box

nabildeco@yahoo · 02-04-2008, 08:24

i made as u asked me to do but always same prob .... pinouts detection ok, but can't applicate any function ( formating, imei change, read flash ..... etc ) !!!!!!!!!!!!!!!!

please any other idea ?

abdouunlok · 02-04-2008, 10:37

brother nabil this probleme have one solution u can solve it with spider man box cracked it work free and it is good tool

nabildeco@yahoo · 02-04-2008, 10:43

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!

abdouunlok · 02-04-2008, 10:50

why ?????????????????????????????????????????????????? ???

unlock_solution · 02-04-2008, 13:04

here u r boss

--------------------------------------------------------------------------------

here's the picture ( battry always inserted ) ... by the way , today the box found deffirent pinouts not same as yesterday !!!!!!!!!!!!!!!!!
Attached Thumbnails

brothe when you are finding pinouts then see what type of cpu you have i think when you first read you have mtk cpu then 2nd time you change .....thats why your phone is not booting ......... select mtk cpuand do not connect battery use suplly from crocodile cable problem solved try and post result ............

wbr
varun

nabildeco@yahoo · 02-04-2008, 14:42

i don't know where's exactly the pro !!!!!!!!!!!!!!!!!!!!!!! i used all advices at thread but nothing ............. phone pinouts can be detected, but other functions can't be applicated !!!!!!!!!!!!!!!!!!!!!

can u give me full explication please ?

bestncheap · 02-04-2008, 16:19

as i know this the pin out of rm17 n95
1. gnd
5. rxd
6. txd

try that n set manualy..
the do what u want with mctool..

br

bnc

nabildeco@yahoo · 02-04-2008, 17:13

Quote:

Originally Posted by bestncheap

as i know this the pin out of rm17 n95
1. gnd
5. rxd
6. txd

try that n set manualy..
the do what u want with mctool..

br

bnc

sir .... there's no deference between manual and automatic pinouts finding .... and if that's the good solution , so what will i do with other models ????????????? and what is the advantage for that box ?????????? we used this box while there's other 2 box canflash chinese mobiles .... and we always think that vahid is working as first in the wirld by his specialist box !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

please try to give full and usefull explication ....... maybe its another hardware problem ????????????!!!!!!!!!!!!!!!!!

SiRoYa · 02-04-2008, 18:43

Quote:

Originally Posted by nabildeco@yahoo

sir .... there's no deference between manual and automatic pinouts finding .... and if that's the good solution , so what will i do with other models ????????????? and what is the advantage for that box ?????????? we used this box while there's other 2 box canflash chinese mobiles .... and we always think that vahid is working as first in the wirld by his specialist box !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

please try to give full and usefull explication ....... maybe its another hardware problem ????????????!!!!!!!!!!!!!!!!!

did u check ur pcb ?
ther is first batch of stock in which u have to remove resistor

use search botton to get the pcb picture

bestncheap · 02-05-2008, 09:42

Quote:

Originally Posted by nabildeco@yahoo

sir .... there's no deference between manual and automatic pinouts finding .... and if that's the good solution , so what will i do with other models ????????????? and what is the advantage for that box ?????????? we used this box while there's other 2 box canflash chinese mobiles .... and we always think that vahid is working as first in the wirld by his specialist box !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

please try to give full and usefull explication ....... maybe its another hardware problem ????????????!!!!!!!!!!!!!!!!!

i ask to set manualy cause i see u find pin out different with what i have get before.. (N95 rm17 slide up and down)
cause may be mctools have little problem when detect the phone u get now.. so i give manual setup.. so at least u can do n flashing the phone..
so let wait vahid improve his s.w so can detect corectly..
or another problem.. can be problem at ur phone.. (this may be yes.. may be no..) cause mc tools detect not correct..
may be some faulty in connector 10pin..
cmiiw..
just want to help..

thank u

BR

BnC

02-01-2008, 13:49	#1 (permalink)
nabildeco@yahoo No Life Poster Join Date: Oct 2005 Location: algeria Age: 53 Posts: 633 Member: 189532 Status: Offline Thanks Meter: 28	N95 Rm-17 CHINESE N95 2-SIM (10 PINS CONNECTOR ) PINS DETECTED SUCCEFULLY WITH MCTOOL BUT CAN'T READ OR FORMAT IT !!!!!!!!!!!!!!!!!!!!! WHEN I SHOULD POWER KEEP IT ON , PHONE DOESN'T RESPOND ????????? BY THE WAY THIS MY FIRST ONCE WITH THIS NEW TOOL

02-04-2008, 08:24	#6 (permalink)
nabildeco@yahoo No Life Poster Join Date: Oct 2005 Location: algeria Age: 53 Posts: 633 Member: 189532 Status: Offline Thanks Meter: 28	again i made as u asked me to do but always same prob .... pinouts detection ok, but can't applicate any function ( formating, imei change, read flash ..... etc ) !!!!!!!!!!!!!!!! please any other idea ?

02-04-2008, 14:42	#11 (permalink)
nabildeco@yahoo No Life Poster Join Date: Oct 2005 Location: algeria Age: 53 Posts: 633 Member: 189532 Status: Offline Thanks Meter: 28	always same i don't know where's exactly the pro !!!!!!!!!!!!!!!!!!!!!!! i used all advices at thread but nothing ............. phone pinouts can be detected, but other functions can't be applicated !!!!!!!!!!!!!!!!!!!!! can u give me full explication please ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
n95 rm-17 pinout	momayaz	Infinity-Box	5	05-20-2008 20:23
Pinout for N95 RM-17 like origin pinout needed	..::alexis::..	Infinity-Box	7	05-09-2008 17:54
N95 Rm 17	abecell	J.A.F. By Jafsupport.com	2	03-17-2008 14:45
Pinout from ZT989,N95-RM-17,I-Phone-18pin ?	e-gsmshop	Infinity-Box	1	01-10-2008 23:15
N95 Rm-17	marius service	Nokia Base Band 5 ( BB-5 )	2	12-08-2007 10:32

02-02-2008, 01:08	#2 (permalink)
BesTCooL No Life Poster Join Date: Dec 2002 Location: TURKEY Age: 44 Posts: 3,285 Member: 18442 Status: Offline Sonork: 111110 Thanks Meter: 622	give me picture after found pinout...

02-02-2008, 14:40	#4 (permalink)
VsH-GsM Banned Join Date: Nov 2001 Location: IRAN Age: 38 Posts: 3,679 Member: 7444 Status: Offline Sonork: 100.99999 Thanks Meter: 10,013	Go to Pinout section, After write Pinout settings to box, Set box Resistance to "Low" and then go back to MTK and detect phone without problem.

02-02-2008, 14:48	#5 (permalink)
BesTCooL No Life Poster Join Date: Dec 2002 Location: TURKEY Age: 44 Posts: 3,285 Member: 18442 Status: Offline Sonork: 111110 Thanks Meter: 622	or mark auto wirte settings to box

02-04-2008, 10:37	#7 (permalink)
abdouunlok Insane Poster Join Date: Feb 2007 Posts: 78 Member: 448309 Status: Offline Thanks Meter: 3	brother nabil this probleme have one solution u can solve it with spider man box cracked it work free and it is good tool

02-04-2008, 10:43	#8 (permalink)
nabildeco@yahoo No Life Poster Join Date: Oct 2005 Location: algeria Age: 53 Posts: 633 Member: 189532 Status: Offline Thanks Meter: 28	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!

02-04-2008, 10:50	#9 (permalink)
abdouunlok Insane Poster Join Date: Feb 2007 Posts: 78 Member: 448309 Status: Offline Thanks Meter: 3	why ?????????????????????????????????????????????????? ???

02-04-2008, 13:04	#10 (permalink)
unlock_solution No Life Poster Join Date: Mar 2007 Location: punjab Age: 42 Posts: 784 Member: 478791 Status: Offline Thanks Meter: 52	here u r boss -------------------------------------------------------------------------------- here's the picture ( battry always inserted ) ... by the way , today the box found deffirent pinouts not same as yesterday !!!!!!!!!!!!!!!!! Attached Thumbnails brothe when you are finding pinouts then see what type of cpu you have i think when you first read you have mtk cpu then 2nd time you change .....thats why your phone is not booting ......... select mtk cpuand do not connect battery use suplly from crocodile cable problem solved try and post result ............ wbr varun

02-04-2008, 16:19	#12 (permalink)
bestncheap No Life Poster Join Date: Jan 2003 Location: bestncheap Age: 43 Posts: 1,808 Member: 19785 Status: Offline Thanks Meter: 1,242	as i know this the pin out of rm17 n95 1. gnd 5. rxd 6. txd try that n set manualy.. the do what u want with mctool.. br bnc