Full scheme to repair cable

[arganga]

I need the scheme to repair cable, Disassemble it and now something is not right , I can´t find this in support

[A.N.C]

this is pathetic support , why can support not just make a damm schema so we can mod the cable, really this is bad service its really not so hard for you to do since you sell bad cables with your product

[c9679]

I dont have anything that is able to take pics of my cable at the moment, but I hope this helps (my guide to modifying the cable, this is not the schematics to build your own cable but it might help someone...)

1, You need 2 cables.
2, Remove fuses from inside one of the cables cover them with solder or anything u like (your cables might already have these removed)
3, Cut off the CLK wire (the one without the button) of the second jaf cable & Mark this with paint, tape, nail polish anything you like.
4, Remove the DATA wire (the one with the button) from the cable without the fuses (step2)
5, Replace the DATA wire on the cable with the CLK wire cut from the second cable (step3)

So you should have one cable with the fuses bridged and what looks like two CLK wires (without any buttons)