POST HERE all Successfull Report with Micro-Box, HTC cable, etc.. - Page 12 - GSM-Forum

nabs74 · 09-29-2008, 13:26

hello you can unlock samsung s730i! it s ok... you must select u600 and unlock HOW TO ENTER CODES:
#0149*MCK#, #0111*NCK#, #0141*PCK#, #0133*SPCK#
CALCULATING: OK!
WRITING LOCK DATA: OK!
SAMSUNG U600 UNLOCK: END!

phonexpert_alex · 09-29-2008, 15:06

e210 suported. just select m610 and read codes:
SAMSUNG M610 READ CODES: START!
ACTIVATING TEST MODE: OK!
READING IMEI: OK!
READING SOFTWARE VERSION: OK!
READING HARDWARE VERSION: OK!
READING BLUETOOTH ADDRESS: OK!
READING LOCK STATUS: MSL SECURITY ACTIVE!
BYPASSING MSL SECURITY: OK!
READING LOCK DATA: OK!
MCK: 87192874
NCK: 21037500
SPCK: 21037500
PHONE IS NOT LOCKED!
HOW TO ENTER CODES:
#0149*MCK#, #0111*NCK#, #0141*PCK#, #0133*SPCK#
SAMSUNG M610 READ CODES: END!

and phone info:
IMEI: 35894901xxxxxxx
SW.: E210XEGK1
HW.: MP 1.000
BT.: 001EE2-585B69

phonexpert_alex · 09-29-2008, 15:20

Lg ks360 read codes: Start!
Press power: Ok!
Sending loader: Ok!
Setting speed to 921600: Ok!
Reading flash info: Ok!
Reading imei: Ok!
Reading nck: Ok!
Nck code: 32515119
how to: 1. Insert accepted simcard and tape 2945#*71001#
2. Go to menu>settings>security>simlock and use code.
Lg ks360 read codes: End!

y3kt · 09-30-2008, 00:21

LG KP130 unolcked ok, two pieces, very fast, also Samsung ZV60, no problem! Thanks Micro-Box Team...

llcoolr · 09-30-2008, 13:28

Code:

SAGEM MY202C READ CODES:                                        START!
CONNECTING TO SERVER:                                                OK!
ASKING SERVER FOR ACCESS:                                        ACCEPTED!
GETTING CREDIT DATA FROM SERVER:                         OK!
 CREDIT USED: 4
 CREDIT LIMIT: 10
SEARCHING FOR PHONE:                                                  FOUND!
READING FIRMWARE INFO:                                               OK!
READING HASH TABLE INFO:                                            OK!
READING IMEI:                                                                    OK!
READING MODEL INFO:                                                     OK!
PRESS POWER:                                                                  OK!
READING CPU INFO:                                                           OK!
LOADING CERTIFICATE:                                                   OK!
LOADING APPLICATION:                                                  OK!
READING DATA:                                                                 OK!
DISCONNECTING PHONE:                                                  OK!
CONNECTING TO SERVER:                                                OK!
ASKING SERVER FOR ACCESS:                                        ACCEPTED!
SENDING PHONE DATA TO SERVER:                                OK!
GETTING CREDIT DATA FROM SERVER:                         OK!
 CREDIT USED: 5
 CREDIT LIMIT: 10
WAITING FOR SERVER:                                                     OK!
CONNECTING TO SERVER:                                                OK!
ASKING SERVER FOR ACCESS:                                        ACCEPTED!
GETTING CREDIT DATA FROM SERVER:                         OK!
 CREDIT USED: 5
 CREDIT LIMIT: 10
GETTING CODES DATA FROM SERVER:                          OK!
 
 MODEL: MY202C    IMEI: 352659012487408 CODE: 33773906-41
 
GETTING CREDIT DATA FROM SERVER:                         OK!
 CREDIT USED: 5
 CREDIT LIMIT: 10
SAGEM MY202C READ CODES:                                        END!

llcoolr · 09-30-2008, 15:41

Code:

SAGEM MY332V READ CODES:                                        START!
CONNECTING TO SERVER:                                                OK!
ASKING SERVER FOR ACCESS:                                        ACCEPTED!
GETTING CREDIT DATA FROM SERVER:                         OK!
 CREDIT USED: 5
 CREDIT LIMIT: 10
SEARCHING FOR PHONE:                                                  FOUND!
READING FIRMWARE INFO:                                               OK!
READING HASH TABLE INFO:                                            OK!
READING IMEI:                                                                    OK!
READING MODEL INFO:                                                     OK!
PRESS POWER:                                                                  OK!
READING CPU INFO:                                                           OK!
LOADING CERTIFICATE:                                                   OK!
LOADING APPLICATION:                                                  OK!
READING DATA:                                                                 OK!
DISCONNECTING PHONE:                                                  OK!
CONNECTING TO SERVER:                                                OK!
ASKING SERVER FOR ACCESS:                                        ACCEPTED!
SENDING PHONE DATA TO SERVER:                                OK!
GETTING CREDIT DATA FROM SERVER:                         OK!
 CREDIT USED: 6
 CREDIT LIMIT: 10
WAITING FOR SERVER:                                                     OK!
CONNECTING TO SERVER:                                                OK!
ASKING SERVER FOR ACCESS:                                        ACCEPTED!
GETTING CREDIT DATA FROM SERVER:                         OK!
 CREDIT USED: 6
 CREDIT LIMIT: 10
GETTING CODES DATA FROM SERVER:                          OK!
       
 MODEL: VF527    IMEI: 351959020661833 CODE: 32704444-05
       
GETTING CREDIT DATA FROM SERVER:                         OK!
 CREDIT USED: 6
 CREDIT LIMIT: 10
SAGEM MY332V READ CODES:                                        END!

y3kt · 09-30-2008, 20:09

Sagem my300C unlocked OK! (Using Setool Box as Interface) and with 1 credit. Good Work Micro-Box Team!

y3kt · 10-03-2008, 00:41

Vodafone 226 unlocked ok in few seconds! Good Work!

llcoolr · 10-04-2008, 16:39

Code:

LG KU800 READ INFO:    START!
READING MODEL:     OK!
READING IMEI:     OK!
READING FIRMWARE INFO:    OK!
READING MEMORY INFO:    OK!
READING BLUETOOTH INFO:    OK!
LG KU800 READ INFO:    END!
LG KU800 UNLOCK:     START!
READING MODEL:     OK!
READING IMEI:     OK!
READING FIRMWARE INFO:    OK!
READING MEMORY INFO:    OK!
READING BLUETOOTH INFO:    OK!
SAVE BACKUP:    OK!
KU800_353040013320634_2008_10_04_16_31_50.BKP
UNLOCKING:    OK!
RESTARTING PHONE:     OK!
LG KU800 UNLOCK:     END!

llcoolr · 10-04-2008, 19:50

Code:

SAMSUNG U900 UNLOCK:                                                START!
SEARCHING FOR PHONE:    FOUND!
READING IMEI:      OK!
READING FIRMWARE INFO:     OK!
READING HARDWARE INFO:     OK!
READING SECURITY DATA:                                               OK!
READING UNLOCK DATA:                                                 OK!
CONNECTING TO SERVER:                                                OK!
ASKING SERVER FOR ACCESS:                                        ACCEPTED!
SENDING DATA TO SERVER:                                             OK!
WAITING FOR SERVER:                                                     OK!
GETTING UNLOCK DATA FROM SERVER:                       OK!
UNLOCKING:                                                                       OK!
DISCONNECTING FROM SERVER:                                     OK!
SAMSUNG U900 UNLOCK:                                                END!

kiricu · 10-05-2008, 08:16

Hi All,

here below my log....

MEI: 351578*********
SW: M6260A-KYRZ-2.5.101006T
HW: MP 0.800

SAMSUNG F490 UNLOCK: START!
SEARCHING FOR PHONE: FOUND!
READING IMEI: OK!
READING FIRMWARE INFO: OK!
READING HARDWARE INFO: OK!
READING SECURITY DATA: OK!
READING UNLOCK DATA: OK!
CONNECTING TO SERVER: OK!
ASKING SERVER FOR ACCESS: ACCEPTED!
SENDING DATA TO SERVER: OK!
WAITING FOR SERVER: OK!
GETTING UNLOCK DATA FROM SERVER: OK!
UNLOCKING: OK!
DISCONNECTING FROM SERVER: OK!
SAMSUNG F490 UNLOCK: END!

navistar · 10-05-2008, 13:00

NADEEM GONDAL · 10-05-2008, 14:07

All v810 read codes: Start!
Reading imei: Ok!
Reading cpu info: Ok!
Preparing phone: Ok!
Sending application: Ok!
Reading data: Ok!
Saving data for r&d: Ok!
V810_356559016623394_2008_10_05_18_04_46.mbf please send this file to us!
Reseting counter: Ok!
Calculating: Ok!
Prov.: 234-15
nck: 5954748915712657
how to: Insert not working simcard and use code!
Restarting phone: Ok!
All v810 read codes: End!

route00 · 10-05-2008, 14:20

I got My Micro box, i waited for activation around one hour. The first phone that I unlock is the Samsung u900 and after 1 minute was unlocked. Thanks guys from MICRO BOX.

nabs74 · 10-06-2008, 10:31

hello i test to unlock lg 5300i if you select 5300i in liste it s not ok,you must select G3100 and change speed to 11520 LG G3100 READ INFO: START!
PRESS POWER: OK! DON'T RELEASE POWER!
SENDING BOOT: OK! RELEASE POWER!
READING FLASH ID: OK!
READING IMEI: OK!
READING VERSION: OK!
DISCONNECTING PHONE: OK!
LG G3100 READ INFO: END!

10-05-2008, 13:00	#177 (permalink)
navistar Freak Poster Join Date: Feb 2008 Posts: 97 Member: 704114 Status: Offline Thanks Meter: 34	vodafone 810 unlock done by microbox..

10-05-2008, 14:07	#178 (permalink)
NADEEM GONDAL No Life Poster Join Date: Aug 2007 Location: England Posts: 3,691 Member: 575900 Status: Offline Thanks Meter: 3,177	810 unlock seccessful All v810 read codes: Start! Reading imei: Ok! Reading cpu info: Ok! Preparing phone: Ok! Sending application: Ok! Reading data: Ok! Saving data for r&d: Ok! V810_356559016623394_2008_10_05_18_04_46.mbf please send this file to us! Reseting counter: Ok! Calculating: Ok! Prov.: 234-15 nck: 5954748915712657 how to: Insert not working simcard and use code! Restarting phone: Ok! All v810 read codes: End!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Put in this thread all successfull story with Cyclone-box	NADEEM GONDAL	Cyclonebox	3058	05-24-2019 07:07
Put in this thread all successfull story of Dct4 Imei???? with Mxkey	mobilecitycbk	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	1	06-17-2009 21:28
Put in this thread all successfull UNLOCK AND NOT with Cyclone-box	FullFLASHgSMPH	Cyclonebox	2	04-13-2009 14:00

09-29-2008, 13:26	#166 (permalink)
nabs74 Junior Member Join Date: Dec 2007 Posts: 7 Member: 658340 Status: Offline Thanks Meter: 0	hello you can unlock samsung s730i! it s ok... you must select u600 and unlock HOW TO ENTER CODES: #0149MCK#, #0111NCK#, #0141PCK#, #0133SPCK# CALCULATING: OK! WRITING LOCK DATA: OK! SAMSUNG U600 UNLOCK: END!

09-29-2008, 15:06	#167 (permalink)
phonexpert_alex Freak Poster Join Date: Jul 2007 Posts: 241 Member: 547523 Status: Offline Thanks Meter: 20	e210 suported. just select m610 and read codes: SAMSUNG M610 READ CODES: START! ACTIVATING TEST MODE: OK! READING IMEI: OK! READING SOFTWARE VERSION: OK! READING HARDWARE VERSION: OK! READING BLUETOOTH ADDRESS: OK! READING LOCK STATUS: MSL SECURITY ACTIVE! BYPASSING MSL SECURITY: OK! READING LOCK DATA: OK! MCK: 87192874 NCK: 21037500 SPCK: 21037500 PHONE IS NOT LOCKED! HOW TO ENTER CODES: #0149MCK#, #0111NCK#, #0141PCK#, #0133SPCK# SAMSUNG M610 READ CODES: END! and phone info: IMEI: 35894901xxxxxxx SW.: E210XEGK1 HW.: MP 1.000 BT.: 001EE2-585B69

09-29-2008, 15:20	#168 (permalink)
phonexpert_alex Freak Poster Join Date: Jul 2007 Posts: 241 Member: 547523 Status: Offline Thanks Meter: 20	Lg ks360 read codes: Start! Press power: Ok! Sending loader: Ok! Setting speed to 921600: Ok! Reading flash info: Ok! Reading imei: Ok! Reading nck: Ok! Nck code: 32515119 how to: 1. Insert accepted simcard and tape 2945#*71001# 2. Go to menu>settings>security>simlock and use code. Lg ks360 read codes: End!

09-30-2008, 00:21	#169 (permalink)
y3kt No Life Poster Join Date: Feb 2006 Location: Club-Berry Posts: 1,938 Member: 238127 Status: Offline Sonork: 100.1574867 Thanks Meter: 3,526	LG KP130 unolcked ok, two pieces, very fast, also Samsung ZV60, no problem! Thanks Micro-Box Team...

09-30-2008, 20:09	#172 (permalink)
y3kt No Life Poster Join Date: Feb 2006 Location: Club-Berry Posts: 1,938 Member: 238127 Status: Offline Sonork: 100.1574867 Thanks Meter: 3,526	Sagem my300C unlocked OK! (Using Setool Box as Interface) and with 1 credit. Good Work Micro-Box Team!

10-03-2008, 00:41	#173 (permalink)
y3kt No Life Poster Join Date: Feb 2006 Location: Club-Berry Posts: 1,938 Member: 238127 Status: Offline Sonork: 100.1574867 Thanks Meter: 3,526	Vodafone 226 unlocked ok in few seconds! Good Work!

10-05-2008, 08:16	#176 (permalink)
kiricu Freak Poster Join Date: Dec 2005 Age: 61 Posts: 168 Member: 206710 Status: Offline Thanks Meter: 13	Hi All, here below my log.... MEI: 351578********* SW: M6260A-KYRZ-2.5.101006T HW: MP 0.800 SAMSUNG F490 UNLOCK: START! SEARCHING FOR PHONE: FOUND! READING IMEI: OK! READING FIRMWARE INFO: OK! READING HARDWARE INFO: OK! READING SECURITY DATA: OK! READING UNLOCK DATA: OK! CONNECTING TO SERVER: OK! ASKING SERVER FOR ACCESS: ACCEPTED! SENDING DATA TO SERVER: OK! WAITING FOR SERVER: OK! GETTING UNLOCK DATA FROM SERVER: OK! UNLOCKING: OK! DISCONNECTING FROM SERVER: OK! SAMSUNG F490 UNLOCK: END!

10-05-2008, 14:20	#179 (permalink)
route00 Junior Member Join Date: Sep 2008 Posts: 16 Member: 873076 Status: Offline Thanks Meter: 0	I got My Micro box, i waited for activation around one hour. The first phone that I unlock is the Samsung u900 and after 1 minute was unlocked. Thanks guys from MICRO BOX.

10-06-2008, 10:31	#180 (permalink)
nabs74 Junior Member Join Date: Dec 2007 Posts: 7 Member: 658340 Status: Offline Thanks Meter: 0	hello i test to unlock lg 5300i if you select 5300i in liste it s not ok,you must select G3100 and change speed to 11520 LG G3100 READ INFO: START! PRESS POWER: OK! DON'T RELEASE POWER! SENDING BOOT: OK! RELEASE POWER! READING FLASH ID: OK! READING IMEI: OK! READING VERSION: OK! DISCONNECTING PHONE: OK! LG G3100 READ INFO: END!